Aodach glanaidh microfiber neo-fhighte

Tuairisgeul

Ro-ràdh do aodach glanaidh microfiber neo-fhighte WINIW

Tha aodach glanaidh microfiber neo-fhighte WINIW na sheasamh mar fhuasgladh rèabhlaideach ann an gnìomhachas stuthan glanaidh, air an innleachadh gu sònraichte gus èifeachdas agus goireasachd ath-mhìneachadh ann an cùram chàraichean agus nas fhaide air falbh. Eu-coltach ri aodach glanaidh traidiseanta (leithid ragaichean cotain, tubhailtean pàipeir, no aodach microfiber fighte àbhaisteach), tha an clò microfiber neo-fhighte againn a’ fighe a-steach teicneòlas snàithleach adhartach agus pròiseasan saothrachaidh ùr-ghnàthach gus coileanadh nas fheàrr a lìbhrigeadh - ga fhàgail mar a’ chiad roghainn airson mion-fhiosrachadh càr proifeasanta, bùthan-obrach chàraichean, agus luchd-seilbh chàraichean a bhios a’ leantainn toraidhean glanaidh mionaideach.

Aig cridhe sàr-mhathas an toraidh againn tha an structar neo-fhighte sònraichte aige agus an dèanamh microfiber fìor mhath. Tha gach clò air a chiùradh bho microfibers roinnte le trast-thomhas cho beag ri 0.1-0.5 micron (1/200 tiugh falt duine), cruthachadh trì-thaobhach “meanbh-bhruis” buaidh a tha a 'dol a-steach do bheàrnan beaga air uachdar (m.e., peant càr, glainne, sgàinidhean deas-bhòrd) dust a ghlacadh, ola, agus boinneagan uisge - an àite a bhith gam putadh mun cuairt mar aodach àbhaisteach. Bidh seo chan ann a-mhàin a’ dèanamh cinnteach à glanadh gun streak agus gun lint ach bidh e cuideachd a’ dìon uachdar fìnealta (leithid peant càr agus scrionaichean dealanach) bho sgrìoban, locht cumanta air stuthan glanaidh traidiseanta le aodach garbh.

Fhad ‘s a tha e air a bharrrachadh airson glanadh chàraichean agus tiormachadh (gabhail a-steach peant taobh a-muigh, uinneagan, taidhrichean, agus clàran taobh a-staigh), Tha sùbailteachd aodach glanaidh microfiber neo-fhighte WINIW a ’leudachadh gu raon farsaing de shuidheachaidhean: glanadh taighe (countertops cidsin, uinneagan glainne, àirneis), cumail suas innealan eileagtronaigeach (coimpiutairean-glùine, fònaichean sgairteil, camarathan), agus eadhon glanadh gnìomhachais (innealan mionaideach, uidheamachd obair-lann). A comas air bog a chothromachadh, seasmhachd, agus tha sùghaidh ga dhèanamh na ghlanadh ioma-ghnìomhach a tha riatanach airson cleachdadh proifeasanta agus làitheil.

Composition Stuth & Pròiseas saothrachaidh

Tha coileanadh sònraichte aodach glanaidh microfiber neo-fhighte WINIW a ’tighinn bho na stuthan amh àrd-inbhe agus pròiseas saothrachaidh sòlaimte - tha smachd teann air gach ceum gus dèanamh cinnteach à cunbhalachd, seasmhachd, agus comas-gnìomh.

1. Taghadh de stuth amh Premium

Bidh sinn a’ cleachdadh measgachadh de polyester (Peata) agus polyamide (PA, ris an canar gu tric nylon) mar na stuthan bunaiteach airson na microfibers neo-fhighte againn, le co-mheas saidheansail a tha a’ cothromachadh sùghadh uisge, sùghadh ola, agus neart tensile. Tha na crìochan stuthan sònraichte mar a leanas:

Co-phàirt Stuth	Co-mheas susbaint	Trast-thomhas fibre	Prìomh dhreuchd	Inbhe Càileachd
Polyester (Peata)	70%–80%	0.1-0.3 micron	A 'toirt seachad neart structarail, strì an aghaidh caitheamh, agus comas glacaidh duslach; a’ dèanamh cinnteach gu bheil an clò a’ cumail cumadh às deidh cleachdadh is nighe a-rithist	Sligean Virgin PET (FDA 21 Pàirt CFR 177.1520 dearbhte, neo-phuinnseanta agus gun bholadh)
Polyamide (PA 6/66)	20%–30%	0.3-0.5 micron	Ag àrdachadh sùghadh uisge is ola (Tha feartan hydrophilic agus lipophilic aig PA); a 'cur bogachd gus casg a chur air sgrìoban uachdar	Sgoltagan PA àrd-sheasmhachd (neart tensile ≥8.5 cN/dtex, a’ dèanamh cinnteach à seasmhachd fiber)
Cur-ris gnìomhach	≤2%	-	Àidseant antistatic (a 'lùghdachadh ath-cheangal duslach); àidseant antibacterial (a 'cur bacadh air fàs molltair); UV stabilizer (airson cleachdadh a-muigh)	EU REACH-gèilleadh, neo-thruaillidh air craiceann an duine

Carson a tha am measgachadh seo? Tha microfibers fìor-ghlan polyester seasmhach ach tha droch ghabhail a-steach uisge aca, fhad ‘s a tha polyamide fìor-ghlan gu math sùbailte ach buailteach a chaitheamh. Tha ar 70/30 gu 80/20 Bidh co-mheas PET / PA a’ faighinn an cothromachadh foirfe: bidh an clò a’ gabhail a-steach 7-10 uair a chuideam ann an uisge (air leth freagarrach airson tiormachadh càr) agus 3-5 uair a chuideam ann an ola (sàr-mhath airson saim a thoirt air falbh bho bhàghan einnsein no uachdar cidsin), fhad ‘s a chumas iad beatha seirbheis de 50-100 nighe (fada nas fhaide na aodach cotain, a bhios mar as trice a’ caitheamh às deidh 10-15 nighe).

2. Pròiseas saothrachaidh adhartach neo-fhighte

Eu-coltach ri aodach microfiber fighte (a tha air an dèanamh le fighe snàth), tha ar n-aodach neo-fhighte a' cleachdadh a uisgeachadh (spùinneadair) phròiseas- teicneòlas gun shnàthaid a bhios a’ ceangal snàithleach le bhith a’ cleachdadh jets uisge le cuideam àrd. Tha am pròiseas seo a 'cruthachadh bog, poranach, agus structar èideadh a tha nas fheàrr na roghainnean fighte ann am bog agus èifeachdas glacaidh duslach. Tha an sruth-obrach saothrachaidh iomlan a’ toirt a-steach 8 prìomh cheumannan:

1. Stuth amh a 'leaghadh & Fiber Extrusion: Tha sgoltagan PET agus PA air an leaghadh air leth aig 260 ° C (Peata) agus 230 ° C (PA), an uairsin air a thoirt a-mach tro spinneret le mìltean de thuill bheaga (trast-thomhas 0.05mm) gus filamentan leantainneach a chruthachadh. Tha na filamentan air am fuarachadh gu luath le èadhar (25°C) a dhaingneachadh ann an snàithleach amh.
2. Sgaradh fibre (Ceum Critigeach): Tha na filamentan eas-chruthach fo ùmhlachd sgoltadh meacanaigeach - tha gach filament air a roinn ann an 8-16 microfibers (m.e., thig filament 0.5mm 16 microfibers de 0.1mm gach fear). Bidh an ceum seo a’ meudachadh farsaingeachd uachdar a’ chlò (tha thairis air gach meatair ceàrnagach de chlò 1 billean microfiber), a tha deatamach dha na comasan duslach is sùghaidh leaghan aige.
3. Cruthachadh lìn fiber: Tha na microfibers roinnte air an cur ann an lìon air thuaiream a’ cleachdadh inneal càrdaidh. Bidh cruthachadh lìn air thuaiream a’ dèanamh cinnteach gu bheil neart èideadh aig a’ chlò anns gach taobh (Chan eil “puingean lag” mar aodach fighte, a tha nas treasa air feadh an dlùth agus an inneach), casg a chur air reubadh rè glanadh làidir.
4. Ceangal hydroentanglement: Tha an lìon fiber air a thoirt seachad fo jets uisge le cuideam àrd (cuideam 80-120 bar) a bhios a 'briseadh an lìn agus a' toirt a-steach snàithleanan. Bidh seo a’ ceangal na freumhagan gun cheimigean no teas, a 'gleidheadh ​​​​ionracas agus bog microfibers. Tha an cuideam uisge air atharrachadh a rèir an tighead aodaich a tha thu ag iarraidh: 80 bàr airson aodach aotrom (100-150 gsm) agus 120 bàr airson aodach trom (200- 300 gsm).
5. A' nighe & A 'crìonadh: Tha an lìon ceangailte air a nighe le uisge deionized (60°C) agus inneal-glanaidh tlàth gus fuigheall ola a thoirt air falbh bhon eas-tharraing. Tha an ceum seo a 'dèanamh cinnteach gu bheil an t-aodach “gun ola”- deatamach airson glanadh chàraichean, oir dh'fhàgadh ola a tha air fhàgail sreathan air peant no glainne.
6. A 'tiormachadh & Calendering: Tha an lìon air a nighe air a thiormachadh ann an àmhainn (120°C) gus taiseachd a thoirt air falbh, an uairsin a 'dol tro rollaichean mìosachain (teòthachd 80 ° C, cuideam 50 N/cm²) gus an uachdar a rèiteachadh agus an tighead atharrachadh. Bidh calendering cuideachd ag àrdachadh seilbh gun lint le bhith a’ putadh snàithleach sgaoilte a-steach don structar.
7. Còmhdach gnìomh (Roghainneil): Airson tionndaidhean sònraichte (m.e., aodach antibacterial no antistatic), còmhdach stèidhichte air uisge (anns a bheil riochdairean antibacterial ion airgid no riochdairean antistatic stèidhichte air carbon) air a chuir an sàs tro chòmhdach spraeraidh. Tha an còmhdach air a leigheas aig 100 ° C gus dèanamh cinnteach gu bheil e a 'cumail ri snàithleach gun a bhith a' toirt buaidh air bog.
8. Buain & Pacadh: Tha an stuth crìochnaichte neo-fhighte air a ghearradh ann am meudan àbhaisteach (m.e., 30x40cm, 40x40cm) no meudan gnàthaichte a rèir riatanasan teachdaiche. Tha gach clò air a sgrùdadh airson uireasbhaidhean (tuill, tiugh neo-chòmhnard, lint), an uairsin air a phacaigeadh ann am pocannan PE (fa leth no mòr) le bileagan toraidh a’ comharrachadh meud, gsm, agus tagradh (m.e., “Glanadh peant càr” neo “A 'tiormachadh glainne”).

Tha am pròiseas gu lèir fèin-ghluasadach le uidheamachd fo smachd coimpiutair, dèanamh cinnteach gu bheil tiugh cunbhalach aig gach baidse de chlò (atharrachadh ≤±5%), cuideam (atharrachadh ≤±3%), agus coileanadh. Tha ar factaraidh ISO 9001:2015 dearbhte, le sgrùdadh fìor-ùine air prìomh pharamadairean (m.e., cuideam uisge ann an uisgeachadh, co-mheas sgoltadh fiber) gus inbhean càileachd a chumail suas.

Prìomh fheartan de aodach glanaidh microfiber neo-fhighte WINIW

Tha sàr-aodach glanaidh microfiber neo-fhighte WINIW ri fhaicinn anns an 6 prìomh fheartan - gach fear air a dhealbhadh gus puingean pian de stuthan glanaidh traidiseanta fhuasgladh agus coinneachadh ri iarrtasan àrda glanadh proifeasanta is làitheil.

1. Cruinneachadh Dust Sònraichte (Gun lint & Streap-saor)

Bidh na microfibers sgoltadh a 'cruthachadh a “electrostatic adsorption” buaidh: nuair a bhios an clò a’ suathadh an aghaidh uachdar, bidh e a’ gineadh cosgais statach lag a tharraingeas mìrean duslach (cho beag ri 0.1 miocroin, nam measg poilean, miteagan duslach, agus fuigheall carbad-eiridinn) coltach ri magnet. Eu-coltach ri aodach cotain, a tha dìreach a’ putadh duslach timcheall no a’ fàgail lint (air sgàth snàithleach sgaoilte), bidh an clò microfiber neo-fhighte againn a’ glacadh duslach anns na beàrnan eadar snàithleach - a’ dèanamh cinnteach nach tèid iad air ais chun uachdar glan.

Deuchainn le SGS (prìomh obair-lann treas-phàrtaidh) sealltainn gu bheil ar n-aodach air falbh 99.7% de ghràinean duslach bho uachdar peant càr, an coimeas ri 65% airson luideagan cotain agus 85% airson aodach àbhaisteach microfiber fighte. Airson glanadh glainne (m.e., windshields càr no uinneagan taighe), bidh an clò a’ fàgail sruthan neoni - eadhon às aonais riochdairean glanaidh - leis gu bheil an structar porous aige a’ gabhail a-steach uisge is salachar gu tur, seach a bhith gan sgaoileadh ann an sreathan.

Sgeama Iarrtais: Fìor mhath airson clàran càr a ghlanadh (a chruinnicheas duslach mìn ann an sgoltaidhean), lionsan camara, agus sgàileanan-uchd - uachdair far am biodh lint no sreathan a' milleadh coltas no gnìomhachd.

2. Uisge Superior & Ion-ghabhail Ola

Tha an cothlamadh de fheartan hydrophilic / lipophilic polyamide agus porosity àrd an structair neo-fhighte a’ toirt comasan sùghaidh lionn sònraichte don chlò.:

• Gabhail uisge: Gabhail a-steach 7-10 tursan a chuideam ann an uisge ann 3 diog. Aodach 40x40cm (cuideam 150g) faodaidh e suas ri 1.5 liotairean uisge - gu leòr airson càr meadhanach mòr a thiormachadh (m.e., Toyota Camry) ann an 2-3 aodach, an coimeas ri 8-10 tubhailtean cotan.
• Ion-ghabhail Ola: Gabh a-steach 3-5 uair a chuideam ann an ola (gabhail a-steach ola einnsean, ola còcaireachd, agus saim). Tha seo ga dhèanamh air leth freagarrach airson bàghan einnsean càr a ghlanadh (toirt air falbh aoidion ola), stòbhaichean cidsin (a 'sguabadh saill), agus slabhraidhean baidhsagal (a’ gabhail a-steach cus lubricant).

Eu-coltach ri spong no tubhailtean pàipeir (a chumas leaghan air an uachdar agus a bhios a’ drip gu furasta), bidh an clò againn a’ glasadh leaghan a-steach don structar snàithleach - gus an urrainn dhut sguab gu dìreach (m.e., dorsan càr) gun a bhith a 'dòrtadh uisge no ola. Às deidh sùghadh, tha an t-aodach fhathast aotrom agus furasta a tharraing a-mach (a' cumail 80% comas sùghaidh às deidh wringing), a’ ceadachadh cleachdadh a-rithist ann an aon seisean glanaidh.

3. Ultra-bhog & Scratch-Resistant

Tha am pròiseas hydroentanglement a 'cruthachadh rèidh, uachdar plush le inneach coltach ri suede - fada nas buige na aodach microfiber fighte (aig a bheil gu tric oirean snàth garbh) no ragan cotain (a dh’ fhaodadh a bhith a’ toirt a-steach neo-chunbhalachd cruaidh leithid gràinean sìl). Trast-thomhas math nam microfibers (0.1-0.5 micron) a’ dèanamh cinnteach nach bi iad a’ sgrìobadh uachdar fìnealta, eadhon fo chuideam.

Rinn sinn deuchainn sgrìob air còta soilleir chàraichean (an còmhdach dìon air peant càr): suathadh ar n-aodach an aghaidh a’ chòta shoilleir 1,000 amannan le cuideam 5N (co-ionann ri glanadh làidir) mar thoradh air nach robh sgrìoban follaiseach no comharran swirl. Air an làimh eile, dh'adhbhraich rag-chotain leis an aon làimhseachadh 15-20 comharran swirl math, agus dh'adhbhraich clò microfiber fighte 5–8 comharran.

Sgeama Iarrtais: Sàbhailte airson a chleachdadh air peant càr (gu sònraichte càraichean dubha, a sheallas sgrìoban gu furasta), piano a 'crìochnachadh, sgrionaichean fònaichean sgairteil, agus speuclairean - uachdar far a bheil casg sgrìobadh deatamach.

4. Super seasmhach & Nigheadaireachd

Tha an cothlamadh snàithleach PET/PA agus an ceangal hydroentanglement a’ dèanamh an clò gu mòr an aghaidh caitheamh is deòir. Eu-coltach ri aodach cotain (a tha ag èigheach, pill, no caill sùghaidh às deidh beagan nighe), Bidh an clò microfiber neo-fhighte againn a’ cumail suas a structar agus a choileanadh tro nighe 50-100 (inneal a ghabhas nighe aig 60 ° C). Prìomh chomharran seasmhachd:

• Neart tensile: ≥250 N/5cm (stiùireadh inneal) agus ≥200 N/5cm (crois-stiùiridh) às dèidh 50 nighe (ASTM D5035 àbhaisteach).
• Glèidheadh ​​Absorption: A ’gleidheadh ​​​​≥85% de chomas sùghaidh uisge tùsail às deidh sin 100 nighe.
• Glèidheadh ​​​​Cruth: Lùghdachadh ≤3% an dèidh nighe (vs. 5-8% airson aodach cotain).

Tha an clò cuideachd an aghaidh riochdairean glanaidh cumanta: faodar a chleachdadh le inneal-glanaidh neodrach, seampùthan càr, agus luchd-glanaidh glainne gun a bhith a 'dèanamh cron air snàithleach. A 'seachnadh bleach no innealan-glanaidh aodaich (a tha a 'dùnadh beàrnan microfiber) leudaichidh e a bheatha seirbheis nas fhaide.

5. Antibacterial & Odor-Resistant (Roghainneil)

Tha ar caochladh antibacterial air a làimhseachadh le ian airgid (Ag⁺) riochdairean antibacterial tron ​​​​phròiseas còmhdachaidh. Bidh ions airgid a’ dol a-steach do na buill-bodhaig cealla bacteriach, a 'cur bacadh air an metabolism agus a' marbhadh 99% de bacteria cumanta (nam measg E. coli, Staphylococcus aureus, agus spòran molltair) a-staigh 24 uairean - gach toradh deuchainn SGS (Ìre ASTM E2149).

Tha am feart seo a 'fuasgladh duilgheadas mòr le aodach traidiseanta: cotton or ordinary microfiber cloths retain moisture and food residues, becoming breeding grounds for bacteria and developing a musty odor after repeated use. The antibacterial non woven microfiber cloth remains odor-free even when used for kitchen cleaning (m.e., wiping raw meat surfaces) or car interior cleaning (which is prone to moisture buildup).

The antibacterial effect is long-lasting: it retains ≥90% of its antibacterial activity after 50 nighe, making the cloth hygienic for long-term use.

6. Multi-Scenario Versatility

While optimized for car cleaning, the cloth’s balanced performance makes it suitable for over 10 cleaning scenarios. Below is a breakdown of recommended uses by variant:

Cloth Variant	Key Parameters	Recommended Applications	Why It Works
Car Paint & Exterior	150-200 gsm; 70/30 PET/PA; ultra-soft surface	Car paint washing, wax removal, scratch repair (tagradh snas)	Bidh inneach bog a ’cur casg air comharran swirl; bidh sùghadh duslach àrd a’ toirt air falbh mìrean mus sgrìob iad peant
A 'tiormachadh càr	200-250 gsm; 80/20 PET/PA; porosity àrd	A 'tiormachadh corp càr, uinneagan, agus cuibhlichean an dèidh nighe	Gabhail a-steach 10x a chuideam ann an uisge; a 'tiormachadh gu luath gun a bhith a' fàgail spotan uisge
Taobh a-staigh càr	120-150 gsm; còmhdach antibacterial; gun lint	A 'glanadh clàran-bùird, suidheachan (leathar/aodach), fealla-dhà, agus touchscreens	Tha feart antibacterial a 'cur casg air odor; bidh dealbhadh gun lint a’ seachnadh fuigheall air scrionaichean
Cidsin & Dhachaigh	150-200 gsm; sùgh-ola; antibacterial (roghainneil)	A’ glanadh na stòbhaichean, countertops, soithichean, agus uinneagan glainne	A 'gabhail a-steach saill agus uisge; caochladh antibacterial sàbhailte airson uachdar conaltraidh bìdh
Leictreonaic	100-120 gsm; còmhdach antistatic; snàithleach fìor mhath	A 'glanadh sgàileanan laptop, fònaichean sgairteil, camarathan, agus pannalan Tbh	Tha feart antistatic a ’cur casg air duslach ath-cheangal; bidh snàithleach bog a’ seachnadh sgrìoban sgrion
Tionnsgalach & Cruinneas	200- 300 gsm; neart tensile àrd; ìosal-lint	A 'glanadh pàirtean inneal, uidheamachd obair-lann, agus lionsan optigeach	Seasmhach gu leòr airson cleachdadh trom; bidh dealbhadh lint ìosal a’ seachnadh truailleadh co-phàirtean mionaideach

Sònrachaidhean Teicnigeach air aodach glanaidh microfiber neo-fhighte WINIW

Gus stiùireadh mionaideach a thoirt seachad airson taghadh agus cleachdadh toraidh, Tha WINIW air mion-chomharrachadh teignigeach a stèidheachadh a’ còmhdach feartan fiosaigeach, comharran coileanaidh, agus inbhean gèillidh. Tha a h-uile dàta air a dhearbhadh a rèir inbhean eadar-nàiseanta (ASTM, ISO, AATCC) agus air a dhearbhadh le deuchainn-lannan treas-phàrtaidh (SGS, Intertek) gus dèanamh cinnteach à cruinneas agus earbsachd.

Roinn-seòrsa	Paramadair	Inbhe deuchainn	Raon luach (Atharrachadh àbhaisteach)	Raon luach (Caochladh Dleastanas Trom)	Tuairisgeul
Fiosrachadh Bunaiteach	Composition Stuth	ASTM D6296	70% Peata / 30% PA	80% Peata / 20% PA	Tha PET a 'toirt seachad seasmhachd; Bidh PA ag àrdachadh sùghaidh; co-mheas air atharrachadh airson feumalachdan tagraidh
	Cuideam gram (gsm)	ISO 3801	100-150 gsm	200- 300 gsm	Aotrom (100-120 gsm): eileagtronaigeach / glainne; meadhanach (120-150 gsm): càr a-staigh / dachaigh; trom (200- 300 gsm): taobh a-muigh càr / gnìomhachais
	Tigheadas (mm)	ISO 5084	0.3-0.5 mm	0.6-1.0 mm	A 'freagairt ri cuideam gram; tha sùgh nas àirde aig aodach nas tiugh ach chan eil iad cho sùbailte
Corporra & Feartan meacanaigeach	Neart tensile (MD/CD)	ASTM D5035	200-250 N / 5 cm / 150-200 N / 5 cm	300-350 N/5cm / 250-300 N / 5 cm	MD (Stiùireadh inneal); CD (Crois-stiùiridh); caochladair trom-dhleastanas a’ seasamh ri sgrìobadh làidir
	Leudachadh aig Break (MD/CD)	ASTM D5035	15–20% / 20–25%	10–15% / 15–20%	Leudachadh nas ìsle airson tionndadh trom-dhleastanas (a 'lùghdachadh sìneadh rè cleachdadh)
	TEAR Neart (MD/CD)	ASTM D1424	25—35 n / 20—30 n	40—50 n / 35—45 n	A ’seasamh an aghaidh reubadh nuair a bhios tu a’ sguabadh oirean (m.e., frèamaichean doras càr, oiseanan cidsin)
	Bog (Cladach A)	ASTM D2240	20-30 Cladach A	30-40 Cladach A	Nas buige na microfiber fighte (40-50 Cladach A) agus cotan (50-60 Cladach A)
Coileanadh Absorption	Comas gabhail uisge	AATCC 79	700–900% (7-9x cuideam)	900–1100% (9-11x cuideam)	Air a dhearbhadh le uisge grùide aig 25 ° C; ùine in-ghabhail ≤3 diogan
	Comas gabhail ola	AATCC 112	300–400% (3-4x cuideam)	400–500% (4-5x cuideam)	Air a dhearbhadh le ola motair (SAE 5W-30) aig 25 ° C
	Èifeachdas Wringing	Inbhe a-staigh	≥70%	≥65%	An àireamh sa cheud de dh'uisge a chaidh a ghabhail a-steach a chaidh a thoirt air falbh às deidh a bhith a 'crathadh làimhe; nas àirde = nas ath-chleachdadh
Glanadh & Seasmhachd	Ìre toirt air falbh dust	ISO 15884	≥95%	≥98%	Ìre toirt air falbh gràinean duslach 0.1-10 micron (m.e., poilean, miteagan duslach)
	Sgaoileadh Lint	ASTM D4966	≤5 mg / m²	≤3 mg / m²	lint as ìsle airson uachdar a tha mothachail air sgrìob (m.e., peant càr, eileagtronaigeach)
	Seasmhachd nighe	ISO 6330	50-80 nighe (60°C)	80-120 nighe (60°C)	A ’gleidheadh ​​​​comas sùghaidh ≥85% agus ≥80% neart tensile às deidh an nighe as motha
	Resistance ceimigeach	ASTM D471	A ’seasamh an aghaidh innealan-glanaidh neodrach, seampùthan càr, luchd-glanaidh glainne	A 'seasamh an aghaidh aigéid lag (pH 4-6), alkalis lag (pH 8-10), agus fuasglaidhean (ethanol, isopropanol)	Gun ìsleachadh fiber no dath dath às deidh bogadh 24h
Coileanadh Sònraichte (Roghainneil)	Gnìomhachd antibacterial	Tha an inbhe ASTM E2149	≥99% (E. coli, S. aureus)	≥99% (E. coli, S. aureus, molltair)	Còmhdach ian airgid; a’ cumail ≥90% de ghnìomhachd às deidh sin 50 nighe
	Seilbh Antistatic	ASTM D257	Frith-aghaidh uachdar: 10⁶–10 tha	Frith-aghaidh uachdar: 10⁵–10⁷ Ω	Àidseant antistatic stèidhichte air carbon; a 'lùghdachadh ath-cheangal duslach le 80%
	Frith-aghaidh UV	ASTM G154	Gleidheadh ​​neart tensile ≥80% (UV 1000 h)	Gleidheadh ​​neart tensile ≥85% (UV 2000 h)	Stabilizer UV air a chur ris; freagarrach airson cleachdadh a-muigh (m.e., glanadh bhàtaichean)
Sàbhailteachd & Gèilleadh	Tocsaineachd & Irritation craiceann	I REACH, FDA 21 CFR 177.1520	Neo-puinnseanta, no meatailtean trom (Pb/Cd/Hg ≤1ppm), sgòr irioslachd craiceann 0 (gun irioslachd)		Sàbhailte airson uachdar conaltraidh bìdh (cidsin) agus conaltradh craiceann dìreach
	Buaidh Àrainneachdail	ISO 14021	Ath-chuairteachadh (Measgachadh PET / PA), bith-ruigsinneach fo todhar gnìomhachais (180 làithean)		Cleachdaidhean pròiseas toraidh 30% nas lugha de uisge na saothrachadh microfiber fighte

Stiùireadh Iarrtais: Mar as urrainn dhut coileanadh a mheudachadh

Gus na toraidhean glanaidh as fheàrr a choileanadh agus beatha seirbheis a ’chlò a leudachadh, tha cleachdadh agus cumail suas ceart deatamach. Gu h-ìosal tha stiùireadh mionaideach airson diofar shuidheachaidhean tagraidh, gabhail a-steach gnìomhan ceum air cheum, mearachdan cumanta a sheachnadh, agus molaidhean cumail suas.

1. Glanadh Chàraichean & A 'tiormachadh (Iarrtas as mòr-chòrdte)

Tha aodach glanaidh microfiber neo-fhighte WINIW air a chleachdadh gu farsaing ann am mion-fhiosrachadh càr proifeasanta air sgàth a fheartan dìon-sgrìobach agus àrd-ghabhail. Lean na ceumannan seo airson na toraidhean as fheàrr:

1.1 Glanadh càr taobh a-muigh (Peantadh, Windows, Cuibhlichean)

1. Ro-ghlan: Thoir air falbh sprùilleach sgaoilteNigh an càr le uisge (cuideam ìosal) gus pìosan mòra a thoirt air falbh (gainmheach, salachar) a dh’ fhaodadh am peant a sgrìobadh. Na cleachd an clò microfiber gu dìreach air uachdar tioram - thèid sprùilleach tioram a shlaodadh thairis air a’ pheant, ag adhbhrachadh comharran swirl.
2. Tagh an caochladh aodach ceartCleachd 150-200 gsm tionndadh ultra-bhog airson peant (70/30 PET/PA); 200-250 gsm àrd-ion-ghabhail caochladh airson uinneagan; 250- 300 gsm caochlaideachd trom-dhleastanas airson rothan (gus duslach agus ola breic a thoirt air falbh).
3. Pròiseas Nigheadaireachd (Peantadh)
   • Lìon bucaid le uisge (25-30 ° C) agus cuir seampù càr neodrach (pH 6-8; seachain innealan-glanaidh cruaidh).
   • Soak an clò ann an uisge siabann gus am bi e làn shàthaichte, an uairsin cuir a-mach beagan (cumail 30% taiseachd - bidh ro fhliuch a 'lagachadh an t-seampù, lughdaichidh ro thioram lubrication).
   • Sguab an càr ann an earrannan beaga (50x50cm) a’ cleachdadh ghluasadan cruinn ciùin. Fòcas air aon raon aig an aon àm (m.e., cochall, dorsan) agus nigh an clò ann an uisge glan às deidh gach earrann gus salachar cruinnichte a thoirt air falbh.
   • An dèidh nighe, nigh an càr le uisge glan gus fuigheall shampoo a thoirt air falbh, an uairsin lean air adhart gu tiormachadh.
4. Pròiseas tiormachaidh
   • Cleachd an 200-250 gsm àrd-ion-ghabhail caochladh (80/20 PET/PA). Sguab a-mach an clò gu tur mus tèid a chleachdadh, an uairsin paisg e ann am poca (4 sreathan) gus an raon in-ghabhail a mheudachadh.
   • Tiormaich an càr bho mhullach gu bonn (mullach → windshield → cochall → dorsan → cuibhlichean) gus nach bi uisge a’ sileadh air uachdar a tha air a thiormachadh mar-thà.
   • Airson glainne (sgiath-gaoithe, uinneagan), cleachd clò tioram agus sguab ann an a “Z” pàtran gus casg a chuir air sruthan. Ma nochdas sreathan, taisich an clò beagan le uisge grùide agus ath-sguabadh às.
5. Glanadh Cuibhle (Dust breic & Ola)
   • Cleachd an 250- 300 gsm caochlaideachd trom-dhleastanas (an aghaidh duslach breic, a tha alcaileach). Cuir a-steach inneal-glanaidh cuibhle (pH 7-9) ris a' chuibhle, leig leis suidhe airson 1-2 mionaid (na leig leis tioramachadh).
   • Sguab a’ chuibhle leis a’ chlò tais, ag amas air na spògan agus na calipers breic (far a bheil dust a' cruinneachadh). Nigh an clò gu tric gus nach tèid duslach ath-thasgadh.

1.2 Glanadh càr a-staigh (Deas-bhòrd, Seataichean, Sgrionaichean-touch)

1. Tagh an caochladh aodach ceartCleachd 120-150 gsm antibacterial caochladh airson bùird agus suidheachain (a 'cur casg air fàileadh bho bhith a' dòrtadh bìdh); 100-120 gsm antistatic caochlaideach airson scrionaichean suathaidh agus siostaman infotainment (a 'lùghdachadh ath-cheangal duslach).
2. Deas-bhòrd & Stuthan plastaig
   • Cleachd clò tioram no beagan tais (tais le uisge a-mhàin - seachain dìonadairean stèidhichte air silicone, a dh’ fhaodas an t-aodach a dhèanamh rèidh). Sguab ann an loidhnichean dìreach gus duslach agus lorgan-meòir a thoirt air falbh.
   • Airson stains neònach (m.e., dòrtadh cofaidh), cleachd inneal-glanaidh tlàth a-staigh (caolaichte 1:10 le uisge) agus dubh an smal (na suathadh, a sgaoileas e).
3. Seataichean Leathar
   • Cleachd clò beagan tais (susbaint taiseachd ≤20%) gus na suidheachain a ghlanadh. Seachain cus uisge, a dh'fhaodas a dhol a-steach do phòlaichean leathair agus a bhith ag adhbhrachadh sgàineadh.
   • An dèidh glanadh, cleachd clò tioram gus na suidheachain a ghlanadh agus gus an taiseachd a tha air fhàgail a thoirt air falbh. Na cleachd innealan-gleidhidh leathair leis a’ chlò - cuir conditioner gu dìreach air an t-suidheachan, an uairsin buff leis an aodach.
4. Seataichean Fabric & Bratan-ùrlair
   • Airson stains aotrom, blath le anart tais (cleachd uisge a-mhàin). Airson stains cruaidh (m.e., eabar), cleachd inneal-glanaidh aodaich agus scrub gu socair ann an gluasadan cruinn.
   • Leig leis an aodach tiormachadh gu tur mus cleachd thu an càr - faodaidh aodach tais molltair a tharraing (bidh an clò antibacterial a’ lughdachadh a’ chunnairt seo ach chan eil e a’ cuir às dha).
5. Sgrionaichean-touch & Leictreonaic
   • Cleachd an tionndadh antistatic (tioram). Sguab an scrion ann an gluasadan cruinn socair gus lorgan-meòir a thoirt air falbh. Na cleachd spraean glanaidh gu dìreach air an sgrion - spìon an clò gu h-aotrom (ma bhios feum air) le inneal-glanaidh dealanach sàbhailte (70% isopropyl deoch-làidir).
   • Seachain a bhith a 'bruthadh gu cruaidh air an sgrion (gu sònraichte touchscreens le glainne tana) gus casg a chur air milleadh.

2. Glanadh Taighe (Cidsin, Seòmar-ionnlaid, Àirneis)

Tha sùbailteachd an aodaich ga dhèanamh air leth freagarrach airson cleachdadh dachaigh - an àite luideagan cotain, tubhailtean pàipeir, agus spongan. Gu h-ìosal tha molaidhean sònraichte airson suidheachadh:

2.1 Glanadh cidsin (Stovetops, Countertops, Miasan)

• Stovetops (Greis & Ola): Cleachd an 150-200 gsm caochlaideach a tha a 'gabhail a-steach ola. Soak an aodach ann an uisge blàth (40-50 ° C) agus cuir braon de siabann mias ris. Sguab às an stòbha gus saim a ghabhail a-steach - chan eil feum air sgrìobadh làidir (bidh microfibers an aodaich a’ glacadh mìrean saim). Nigh an clò ann an uisge teth gus saim a thoirt air falbh, an uairsin ath-sguabadh às gus fuigheall siabann a thoirt air falbh.
• Countertops (Marmor, Clach-ghràin, Fiodh): Cleachd a aodach beagan tais (seachain cus uisge, a dh’ fhaodadh cron a dhèanamh air clach/fiodha). Airson marmor / clach-ghràin (mothachail air searbhag), na cleachd fìon-dhearcan no luchd-glanaidh citris - cleachd uisge a-mhàin. Airson countertops fiodha, sguab leis a 'ghràin gus sruthan a sheachnadh.
• Miasan (Pannaichean neo-mhaide, Bathar glainne): Cleachd an 100-120 gsm caochladh bog (neo-sgriobach). Airson panaichean neo-mhaide, seachain sgrìobadh - bog am pana ann an uisge blàth airson 5 mionaidean, an uairsin sguab leis an aodach gus fuigheall bìdh a thoirt air falbh (bidh microfibers an aodaich a’ togail biadh gun a bhith a’ sgrìobadh an còmhdach neo-mhaide). Airson bathar glainne, tiormaich le clò tioram gus casg a chuir air spotan uisge.

2.2 Glanadh seòmar-ionnlaid (leacan, Sgàthan, Daingnich)

• leacan & Grout: Cleachd an 150-200 gsm caochladh meadhanach. Airson leacan, sguab le clò tais (cuir beagan de inneal-glanaidh seòmar-ionnlaid airson scum siabann). Airson grout (beàrnan caola), paisg an clò ann an stiall tana gus a ruighinn a-steach do sgoltagan - chan eil feum air bruis grout (bidh na microfibers a’ glacadh salachar bho bheàrnan). Nigh an clò gu tric gus nach sgaoil thu grime.
• Sgàthan & Dorsan fras: Cleachd an 120-150 gsm tionndadh gun lint. Sguab às le clò tioram an toiseach gus duslach a thoirt air falbh, an uairsin taisich an t-aodach beagan le uisge (neo a 1:1 measgachadh de uisge agus fìon-geur) agus sguab ann an a “S” pàtran. Crìochnaich le pas tioram gus cuir às do shreathan - chan eil feum air innealan-glanaidh glainne ceimigeach (tha structar an aodaich a’ cur casg air cruthachadh streap).
• Daingnich (Faucets, Taighean-beaga): Cleachd an 150-200 gsm caochladh antibacterial (casg air fàs bacteria ann an àrainneachdan tais). Airson faucets, sguab le clò tais gus spotan uisge a thoirt air falbh - snas le earrann tioram den chlò airson deàrrsadh. Airson taighean-beaga, sguab na h-uachdaran a-muigh (suidheachan, mullach, bonn) le anart tais (cleachd clò sònraichte airson taighean-beaga gus crois-thruaillidheachd a sheachnadh); na cleachd an clò am broinn bobhla an taigh-beag (faodaidh fuigheall sgrìobach milleadh a dhèanamh air snàithleach).

2.3 Àirneis & Làr-làr

• Àirneis Fiodha (Clàir, cathraichean): Cleachd an 100-120 gsm tionndadh ultra-bhog (casg air sgrìoban air uachdar snasta). Dust le clò tioram an toiseach, an uairsin sguab le clò beagan tais (fliuch le uisge a-mhàin) gus stains a thoirt air falbh. Seachain snas àirneis air an aodach - cuir snas dìreach air an àirneis, an uairsin buff leis an aodach.
• Clò-bhualadh (Sofas, Cuiseanan): Cleachd an 120-150 gsm antibacterial caochladh. Airson stains tioram (cromagan, falt peata), sguab le clò tioram a’ cleachdadh stròcan aotrom (bidh an cosgais statach a’ tàladh falt is cromagan). Airson stains liquid (cofaidh, sùgh), cuir às sa bhad le clò tioram gus taiseachd a ghabhail a-steach - na suathadh (a bhios a’ putadh an stain nas doimhne a-steach don aodach). Ma tha feum air, taisich an clò le beagan inneal-glanaidh clò-bhualaidh agus cuir às a-rithist.
• Làr-làr cruaidh (leacag, Laminate, Vinyl): Cleachd an 200-250 gsm àrd-ion-ghabhail caochladh. Ceangail an t-aodach ri ceann mop (ma chleachdas tu mop còmhnard) no cleachd e le làimh airson raointean beaga. Sguab an làr le clò tais (seachain an làr bog - faodaidh cus uisge cron a dhèanamh air laminate / vinyl). Airson stains cruaidh, cuir beagan de inneal-glanaidh làr ris a’ chlò (chan ann dìreach chun an làr) agus sguab - nigh an clò às deidh a chleachdadh gus fuigheall nas glaine a thoirt air falbh.

3. Leictreonaic & Glanadh mionaideach (Sgrionaichean, Camaraichean, Innealan)

Feumaidh dealanach agus uidheamachd mionaideach gun lint, scratch-resistant cleaning—WINIW’s antistatic and ultra-fine fiber variants are ideal for these scenarios:

3.1 Fòn-smart & Laptop Screens

1. Turn off the device (makes fingerprints and dust more visible).
2. Cleachd an 100-120 gsm antistatic caochlaideach (tioram). Gently wipe the screen in one direction (horizontal or vertical)—avoid circular motions (which can spread oil from fingerprints).
3. For stubborn fingerprints, slightly dampen the cloth with distilled water (do not use tap water, which contains minerals that leave spots) and wipe—immediately follow with a dry section of the cloth to dry the screen.
4. Do not spray cleaning solutions directly on the screen (liquid can seep into the device’s edges and damage internal components)—always spray the cloth first (ma bhios feum air).

3.2 Camaraichean & Optical Lenses (Lens, Viewfinder)

1. Cleachd an 100 gsm ultra-fine fiber variant (lint-free and non-abrasive—critical for lens coatings).
2. Blow off loose dust from the lens first (use a camera lens blower) to avoid dragging particles across the lens (which can scratch the coating).
3. Gently wipe the lens in a circular motion from the center to the edges. Use a separate section of the cloth for each wipe (to avoid re-depositing dust).
4. For smudges (oil from fingers), use a small amount of lens cleaning fluid (apply 1 drop to the cloth, not the lens) and wipe—finish with a dry cloth to remove residue.
5. Do not use the same cloth for lens cleaning and general cleaning (to avoid contaminating the lens with dirt from other surfaces).

3.3 Industrial Machinery & Laboratory Equipment

1. Tagh an 200- 300 gsm caochlaideachd trom-dhleastanas (high tensile strength and chemical resistance).
2. For machinery parts (m.e., gears, valves), wipe with a dry cloth first to remove loose debris, then dampen the cloth with a solvent (m.e., isopropanol) compatible with the part’s material (check the equipment manual first).
3. For laboratory glassware (beakers, test tubes), use the cloth to dry glassware after washing—avoid paper towels (which leave lint that can contaminate samples). For precision glassware (m.e., pipettes), use the 100 gsm ultra-soft variant to prevent scratches.
4. An dèidh a chleachdadh, wash the cloth with a neutral detergent and dry completely—do not reuse the cloth for laboratory work if it has been contaminated with chemicals.

4. Cumail suas & Care Tips (Extend Service Life)

Proper maintenance ensures the cloth retains its performance for 50–100 washes. Follow these rules:

• Washing Instructions:
  • Wash the cloth after each use (especially for kitchen/car cleaning) to remove dirt, ola, agus bacteria.
  • Machine wash in cold or warm water (≤60°C)—hot water (>60°C) damages polyamide fibers, reducing absorbency.
  • Use neutral detergents (pH 6-8)—avoid bleach (breaks down fibers), fabric softeners (clogs microfiber gaps, reducing absorption), and powdered detergents (leave residue).
  • Wash separately from cotton or lint-producing fabrics (cotton lint clings to microfibers, reducing dust-trapping efficiency).
  • Do not use fabric softener sheets in the dryer—they coat fibers with a waxy residue.
• Drying Instructions:
  • Tumble dry on low heat (≤60°C)—high heat melts polyamide fibers, causing shrinkage.
  • Air drying (hang to dry) is ideal for preserving fiber structure (extends service life by 20–30%).
  • Do not iron the cloth—heat damages the microfiber structure and reduces softness.
• Storage Tips:
  • Store clean, dry cloths in a breathable container (m.e., cotton bag) or sealed plastic bag (to prevent dust accumulation).
  • Do not store damp cloths (promotes mold growth—even antibacterial variants need to dry to maintain effectiveness).
  • Separate cloths by application (m.e., dedicated cloths for car paint, cidsin, agus electronics) to avoid cross-contamination (m.e., oil from kitchen cloths damaging car paint).
• When to Replace:
  • Absorbency drops significantly (no longer absorbs 5x its weight in water).
  • Fibers fray or pill (reduces softness and increases scratch risk).
  • Stains cannot be removed (even after washing with detergent).
  • Antibacterial/antistatic properties fade (m.e., cloth develops odor quickly after use).

Deuchainn Coileanaidh & Teisteanas

WINIW Non Woven Microfiber Cleaning Cloth undergoes strict quality control and third-party testing to ensure it meets global standards for performance, sàbhailteachd, and environmental friendliness. Below is a detailed breakdown of testing procedures and certifications.

1. In-House Quality Control (IQC & FQC)

Our factory implements a two-stage quality control process: Smachd Càileachd a’ tighinn a-steach (IQC) for raw materials and Final Quality Control (FQC) for finished products.

1.1 Smachd Càileachd a’ tighinn a-steach (Stuthan Raw)

All PET and PA chips are inspected before production to eliminate substandard materials:

• PET Chip Testing:
  • Ìre Sruth Melt (MFR): Tested per ASTM D1238 (àbhaisteach: 15–25 g/10min at 260°C). MFR outside this range affects fiber extrusion consistency.
  • Susbaint Taiseachd: Tested with a halogen moisture analyzer (àbhaisteach: ≤0.05%). High moisture causes bubbles in extruded fibers, reducing strength.
  • Tocsaineachd: Tested for heavy metals (Pb, Cd, Hg, Cr) per FDA 21 CFR 177.1520 (àbhaisteach: ≤1 ppm). Ensures the material is safe for food-contact surfaces.
• PA Chip Testing:
  • Neart tensile: Air a dhearbhadh a rèir ISO 5079 (àbhaisteach: ≥8.5 cN/dtex). Low tensile strength leads to frayed fibers in the finished cloth.
  • Hydrophilicity: Tested by measuring water absorption rate (àbhaisteach: absorbs 10% of its weight in water in 10 diog). Ensures the cloth has good water absorption.
  • Co-chòrdadh dath: Inspected with a colorimeter (ΔE ≤1.0). Ensures uniform color across batches (critical for branded clients).

Raw materials that fail any test are rejected—we maintain a 100% pass rate for incoming materials.

1.2 Smachd càileachd deireannach (Finished Products)

Every batch of cloth (≥500 pieces) undergoes the following tests before shipment:

1. Deuchainn seilbh corporra:
   • Cuideam gram: Randomly sample 10 pieces per batch, cut 10x10cm samples, and weigh (àbhaisteach: variation ≤±3% of the target gsm).
   • Tigheadas: Air a dhearbhadh le tomhas tiugh didseatach (ISO 5084) aig 5 points per sample (àbhaisteach: atharrachadh ≤±5%).
   • Neart tensile: Tested per ASTM D5035 (àbhaisteach: meets the range in technical specifications; failure rate ≤1%).
2. Deuchainn Coileanaidh:
   • Gabhail uisge: Tested per AATCC 79 (àbhaisteach: absorbs ≥7x its weight in water in 3 diog).
   • Ìre toirt air falbh dust: Tested with a dust chamber (ISO 15884) using 0.5–10 micron dust particles (àbhaisteach: ≥95% removal rate).
   • Sgaoileadh Lint: Tested per ASTM D4966 (àbhaisteach: ≤5 mg / m²; samples with lint are re-calendered).
3. Safety Testing:
   • Irritation craiceann: Air a dhearbhadh a rèir ISO 10993-10 (àbhaisteach: no redness or irritation on human skin).
   • Gnìomhachd antibacterial (ma tha sin iomchaidh): Tested per ASTM E2149 (àbhaisteach: ≥99% casg air E. coli agus S. aureus).
4. Sgrùdadh Lèirsinneach:
   • Check for defects: tuill (≥1mm), tiugh neo-chòmhnard, frayed edges, and discoloration.
   • Defect rate standard: ≤0.5% (batches with higher defect rates are reworked or discarded).

2. Third-Party Certifications

Our cloth has obtained certifications from leading global organizations, confirming its compliance with international standards for performance, sàbhailteachd, agus seasmhachd:

• ISO 9001:2015 (Siostam Riaghladh Càileachd):Air a dhearbhadh le SGS, covering the entire production process (raw material procurement to finished product shipment). Ensures consistent quality across batches (batch-to-batch performance variation ≤5%).
• ISO 14001:2015 (Siostam riaghlaidh àrainneachd):Air a dhearbhadh le TÜV Rheinland, verifying that our manufacturing process minimizes environmental impact:
  • Caitheamh uisge: 30% less than woven microfiber production (cleachdadh 500 liters of water per ton of cloth).
  • Caitheamh lùtha: 25% ìosal (uses renewable energy for 40% de riochdachadh).
  • Waste reduction: 95% de sgudal toraidh (fiber scraps) is recycled into other non woven products.
• FDA 21 Pàirt CFR 177.1520 (Sàbhailteachd conaltraidh bìdh):Certified by the U.S. Rianachd Biadh is Drugaichean (FDA), confirming the cloth is safe for use on food-contact surfaces (m.e., countertops cidsin, soithichean). Gun stuthan cronail (meatailtean trom, VOCs) leach into food.
• I REACH (Clàradh, Luachadh, Authorization, and Restriction of Chemicals):Compliant with REACH regulations (197 SVHCs listed as of 2024), ensuring no hazardous chemicals are used in production. Safe for sale in the European Union and other markets that adopt REACH standards.
• AATCC Performance Certification (Ion-ghabhail & Seasmhachd):Certified by the American Association of Textile Chemists and Colorists (AATCC) airson:
  • Ion-ghabhail uisge: ≥7x weight (AATCC 79).
  • Wash durability: Retains ≥85% absorption after 50 nighe (AATCC 135).
• Oeko-Tex® Coitcheann 100 (Product Safety):Certified at Class I (safe for infants and sensitive skin), confirming the cloth contains no harmful substances (formaldehyde, puinnsean-bhiastagan, phthalates) and is non-irritating.

Sgrùdaidhean Cùisean Pròiseact: WINIW Non Woven Microfiber Cleaning Cloth in Real-World Use

Our non woven microfiber cleaning cloth has been adopted by professional car detailing shops, household cleaning services, electronics manufacturers, and industrial facilities worldwide. Below are three typical case studies that demonstrate its performance in different scenarios.

Cùis 1: Professional Car Detailing Shop – “Shine Auto” (Shanghai, Sìona)

Sealladh farsaing air a’ phròiseact

Shine Auto is a high-end car detailing shop specializing in luxury car care (Mercedes-Benz, BMW, Porsche). Before using WINIW cloths, the shop faced two major problems: 1) Traditional cotton rags left swirl marks on black car paint (a common complaint from clients); 2) Woven microfiber cloths lost absorbency after 20–30 washes, increasing material costs.

Dùbhlain

1. Scratch Prevention on Luxury Cars: Black and dark-colored luxury cars have high-gloss paint that shows even fine swirl marks. The shop needed a cloth that could remove dust and polish residue without scratching.
2. Smachd cosgais: The shop used 50–60 cloths daily (for washing, tiormachadh, and interior cleaning). Woven microfiber cloths cost ¥15 each and lasted 1 month—annual cloth costs exceeded ¥30,000.
3. Èifeachdas: Cotton rags required frequent rinsing (every 1–2 cars) due to low absorbency, slowing down detailing speed (1 car took 3 hours to clean).

Fuasgladh WINIW

We recommended three variants tailored to their workflow:

• 150 gsm ultra-soft variant (70/30 PET/PA): For exterior paint cleaning and wax removal (prevents swirl marks).
• 200 gsm high-absorption variant (80/20 PET/PA): For car drying (reduces drying time).
• 120 gsm antibacterial variant: For interior cleaning (prevents odor in leather seats).

A bharrachd, we provided on-site training for 10 detailers on proper cloth use (m.e., avoiding dry wiping, section-by-section cleaning) to maximize performance.

Implementation Results (Às deidh 6 Mìosan)

• Scratch-Free Performance: Client complaints about swirl marks dropped from 8–10 per month to 0. The ultra-soft microfibers (0.1-0.3 micron) eliminated scratches, even on high-gloss black paint.
• Sàbhalaidhean cosgais: WINIW cloths lasted 6–8 months (vs. 1 month for woven microfiber), reducing cloth replacement frequency. Annual cloth costs decreased from ¥30,000 to ¥12,000 (60% sàbhalaidhean).
• Efficiency Improvement: The high-absorption drying cloth absorbed 9x its weight in water, allowing detailers to dry 1 car in 20 mionaidean (vs. 40 minutes with woven cloths). Total detailing time per car shortened to 2 uairean, increasing daily capacity from 4 cars to 6 càraichean (50% increase in revenue).

Cùis 2: Household Cleaning Service – “CleanHome” (Singapore)

Sealladh farsaing air a’ phròiseact

CleanHome is a leading home cleaning service in Singapore, frithealadh 500+ households monthly. The company faced two key issues: 1) Clients complained about lint residue on furniture and electronics (from cotton cloths); 2) Cleaners reported skin irritation from low-quality woven microfiber cloths (which contained harsh chemicals).

Dùbhlain

1. Lint-Free Cleaning: Singaporean households often have light-colored furniture and high-end electronics (m.e., Samsung Frame TVs, Bang & Olufsen speakers) that show lint easily.
2. Sàbhailteachd craiceann: Cleaners work 8-hour shifts, using cloths for 6–7 hours daily. Low-quality cloths caused redness and itching on 15% of cleaners’ hands.
3. Antibacterial Need: Singapore’s humid climate (average humidity 80%) causes cloths to develop mold quickly—clients worried about cross-contamination between households.

Fuasgladh WINIW

We supplied the 120 gsm lint-free antibacterial variant (Oeko-Tex® Class I certified) with the following features:

• Lint release ≤3 mg/m² (meets electronics cleaning standards).
• Silver ion antibacterial coating (99% bacadh air E. coli and mold).
• Non-irritating formula (gun stuthan ceimigeach, pH-neutral).

We also provided color-coded cloths (blue for general cleaning, green for kitchen, red for bathroom) gus casg a chuir air tar-thruailleadh.

Implementation Results (Às deidh 3 Mìosan)

• Lint-Free Satisfaction: Client complaints about lint dropped from 25% gu 2%. CleanHome received 15% more repeat orders due to improved service quality.
• Worker Safety: Cases of skin irritation among cleaners decreased from 15% gu 0. Cleaners reported the cloths were “softer and more comfortable” airson cleachdadh fad-ùine.
• Èifeachdas antibacterial: No mold growth was found on cloths even after 5 days of use (vs. 2 days for previous cloths). Clients’ trust in hygiene increased, a' leantainn gu a 10% price premium acceptance.

Cùis 3: Electronics Manufacturing – “TechCore” (Penang, Malaysia)

Sealladh farsaing air a’ phròiseact

TechCore is a manufacturer of smartphone screens (supplying Xiaomi and Oppo). The company’s cleanroom (Clas 1000) requires strict lint-free and antistatic cleaning to prevent dust and static damage to screen panels (a single dust particle can render a screen defective).

Dùbhlain

1. Lint-Free Requirement: Cleanroom standards allow ≤10 particles (≥0.5 microns) per cubic foot. Traditional cleaning cloths shed lint, increasing screen defect rates (5% of panels were rejected due to lint contamination).
2. Antistatic Protection: Static electricity can damage LCD panels. The company needed cloths with surface resistance 10⁶–10⁸ Ω (to dissipate static without generating new charges).
3. Co-fhreagarrachd ceimigeach: Cleaners use isopropanol (70%) to wipe screens—cloths must resist degradation from alcohol (previous cloths frayed after 10–15 uses).

Fuasgladh WINIW

We customized the 100 gsm antistatic lint-free variant le:

• Ultra-fine fibers (0.1 micron) and calendered surface (lint release ≤2 mg/m²).
• Carbon-based antistatic coating (surface resistance 10⁷ Ω, meets IEC 61340-5-1 inbhean).
• Chemical-resistant PET/PA blend (80/20 co-mheas) that withstands 70% isopropanol.

We also packaged the cloths in vacuum-sealed cleanroom-compatible bags to avoid contamination during delivery.

Implementation Results (Às deidh 1 Bliadhna)

• Defect Rate Reduction: Screen rejection due to lint dropped from 5% gu 0.3%, saving the company $240,000 gach bliadhna (Stèidhichte air 1 million screens produced, $20 per defective panel).
• Antistatic Performance: No static-related damage was reported. The cloths maintained surface resistance 10⁷ Ω after 50 nighe (meets cleanroom requirements).
• Seasmhachd: Each cloth lasted 50–60 uses (vs. 10–15 for previous cloths), reducing material costs by 70% (bho $0.50 per use to $0.15 per use).

Customization Services for WINIW Non Woven Microfiber Cleaning Cloth

We understand that different industries and applications have unique requirements—WINIW offers comprehensive customization services to tailor the cloth to your specific needs. From material parameters to packaging, we ensure the product aligns with your workflow and brand.

1. Stuth & Gnàthachadh Coileanaidh

Adjust fiber ratio, gram cuideam, and functional additives to enhance targeted performance:

Seòrsa Customization	Ceumannan Atharrachaidh	Scenarios iomchaidh	Comharran Coileanaidh Às deidh Gnàthachadh
High-Oil Absorption	Increase PA content to 35–40%; use 0.4–0.5 micron PA fibers (higher lipophilicity).	Industrial degreasing (engine repair, mechanical workshops), commercial kitchens (deep fryer cleaning).	Oil absorption capacity ≥500% (5x cuideam); a' cumail 90% absorption after 50 nighe.
Extreme Antistatic	Cuir 3-5% de charbon fiber ris (giùlain) to PET/PA blend; double-layer antistatic coating.	Electronics manufacturing (semiconductor cleanrooms), explosive environments (chemical storage).	Surface resistance 10⁴–10⁶ Ω; static decay time ≤0.1 seconds (ANSI/ESD S20.20 compliant).
Àrd-Teòthachd Resistance	Measgaich 20% aramid fiber (Kevlar) with PET/PA; adjust hydroentanglement pressure to 150 bàr.	Automotive engine bays (post-repair cleaning, 80–120°C surfaces), industrial ovens (cooled surface cleaning).	Withstands 150°C for 1 hour without shrinkage; a' cumail 85% tensile strength after heat exposure.
Bith-mhillidh	Replace 50% PET with PLA (searbhag polylactic, stèidhichte air lusan); use water-based biodegradable coating.	Eco-friendly households, disposable medical cleaning (ospadalan), outdoor events (no plastic waste).	Biodegrades in soil in 180–270 days (ISO 14855); a' cumail 80% performance during use.
Extra-Large Size	Increase width to 1.5m (standard max 1m); use reinforced edges (double-stitched) to prevent tearing.	Large-area cleaning (warehouse floors, airplane exteriors, panalan grèine).	Size up to 1.5m x 2m; neart tensile ≥350 N / 5cm (resists stretching during large-area wiping).

2. Meud & Gnàthachadh Cruth

Standard sizes are 30x30cm, 30x40cm, 40x40cm, and 40x60cm—but we offer fully customized dimensions and shapes to fit your tools and workflow:

• Size Range: Minimum 10x10cm (for small electronics like smartwatches) to maximum 1.5x2m (for large surfaces like solar panels).
• Cruthan sònraichte:
  • Rectangular with rounded corners (prevents fraying, ideal for car detailing).
  • Triangle (reaches tight spaces like window corners and car door jambs).
  • Pillow-shaped (thicker center for absorption, thinner edges for precision—used for camera lens cleaning).
  • Custom cutouts (for fitting around handles or equipment—e.g., cleaning cloths for coffee machines).
• Làimhseachadh Edge:
  • Oirean air an seuladh le teas (àbhaisteach, prevents fraying for 50+ nighe).
  • Double-stitched edges (trom-dhleasdanas, for industrial use—withstands vigorous scrubbing).
  • Ultrasonic welded edges (gun lint, for cleanroom and electronics cleaning).

3. Brandadh & Gnàthachadh Pacaidh

Enhance brand visibility with customized branding and packaging—ideal for B2B clients (m.e., cleaning services, car shops) and retail brands:

• Roghainnean branndaidh:
  • Clò-bhualadh sgrion: Logos, slogan, or usage guidelines (m.e., “For Car Paint Only”)—available in 1–4 colors (resistant to washing, no fading after 50 nighe).
  • Embroidery: 3D logos for high-end brands (m.e., luxury car detailing shops)—adds a premium look.
  • Labeling: Custom hang tags with product specs, stiùiridhean cleachdaidh, and brand story.
• Roghainnean pacaidh:
  • Individual packaging: PE bags (with hang hole for retail), vacuum-sealed bags (for cleanroom/medical use), or paper envelopes (eco-càirdeil).
  • Bulk packaging: Cartons (50–100 pieces per carton) with custom printing (brand logo, handling instructions).
  • Kit packaging: Mixed sets (m.e., “Car Cleaning Kit” le 2 paint cloths, 1 drying cloth, 1 interior cloth) in custom boxes—ideal for retail and corporate gifts.

4. Pròiseas Customization & Àm stiùiridh

Our streamlined customization process ensures fast delivery without compromising quality:

1. Co-chomhairleachadh riatanas: Share your needs (tagradh, performance goals, meud, branndadh) with our sales team. We provide a free “Customization Proposal” a-staigh 2 làithean obrach (including material recommendations, sample specs, and cost estimate).
2. Leasachadh sampall: After proposal approval, we produce 1–5 prototype samples (3–5 working days for standard customization; 7–10 days for complex customization like aramid blending or special shapes). Samples include a test report with key performance data.
3. Aontachadh sampall: You test the samples and provide feedback—we revise until you’re satisfied (1-2 chuairtean ath-sgrùdaidh, saor an-asgaidh).
4. Mòr-riochdachadh: Aon uair 's gu bheil samples air an aontachadh, we start production. Àm stiùiridh:
   • Gnàthachadh àbhaisteach (meud, clò-bhualadh, pacadh): 10-15 làithean-obrach.
   • Gnàthachadh coileanaidh (fiber ratio, stuthan cur-ris): 15- 20 latha obrach.
   • Gnàthachadh iom-fhillte (aramid blend, special shapes): 20-25 làithean-obrach.
5. Sgrùdadh Càileachd & Lìbhrigeadh: All customized products undergo the same FQC process as standard products. We ship via your preferred method (mar, adhair, courier) and provide tracking information.

Logistics, Luingearachd & Taic às deidh reic

As a global supplier, WINIW ensures seamless delivery and reliable after-sales support—whether you’re a small local business or a multinational corporation.

1. Lìonra Logistics Cruinneil

Bidh sinn ann an com-pàirteachas le prìomh sholaraichean logistics (DHL, FedEx, Maersk, Cosco) to deliver products to 80+ dùthchannan. Choose the shipping method that fits your timeline and budget:

Modh Luingeis	Applicable Order Size	Àm stiùiridh (Bho China Factory)	Cosgais	Additional Benefits
Express Courier (DHL/FedEx)	Òrdughan beaga (≤500 pieces) or samples	3–5 working days (door-to-door)	Meadhanach (m.e., $20–$50 for 100 pieces to Europe)	Lìbhrigeadh as luaithe; online tracking; customs clearance assistance
Bathar Adhair	Medium orders (500–5,000 pieces)	7–10 working days (airport-to-airport)	Low-Medium (m.e., $150–$300 for 1,000 pieces to USA)	Balances speed and cost; ideal for urgent orders
Freiceadan mara (FCL/LCL)	Òrdughan mòra (≥5,000 pieces)	20–35 working days (port-to-port)	Lowest (m.e., $500–$1,000 for 10,000 pieces to Southeast Asia)	Cost-effective for bulk purchases; we handle container loading
Overseas Warehouse	Regular clients (repeat orders ≥3 times/year)	1–3 working days (local warehouse delivery)	Meadhanach (includes warehousing fee, but saves on international shipping)	Stock in our overseas warehouses (A' Ghearmailt, Na Stàitean Aonaichte, Malaysia); supports phased delivery (m.e., monthly shipments for cleaning services)

Customs Clearance Assistance: We provide a full set of export documents, including commercial invoice, liosta pacaidh, teisteanas tùs (CO), aithisg sgrùdaidh càileachd, agus sgrìobhainnean teisteanais (m.e., FDA, Oeko-Tex®). Do luchd-dèiligidh nach eil eòlach air modhan cleachdaidhean ionadail, we cooperate with professional customs brokers in major markets (EU, Na Stàitean Aonaichte, Ear-dheas Àisia) to ensure smooth clearance—our customs clearance success rate is 99.5%.

2. Taic às deidh reic

WINIW’s after-sales service extends beyond delivery, covering training, tracadh càileachd, and problem-solving to ensure you get the most out of our products:

2.1 On-Site & Remote Training

• Trèanadh air an làrach: Airson òrdughan mòra (≥10,000 pieces) or B2B clients (m.e., car detailing chains, cleaning services), we send 1–2 technical specialists to your location for free training (1-2 latha). Tha susbaint trèanaidh a’ toirt a-steach:
  • Proper cloth selection for different scenarios (m.e., which variant to use for car paint vs. eileagtronaigeach).
  • Wiping techniques to avoid scratches and maximize absorption.
  • Maintenance tips (nighe, tiormachadh, stòradh) to extend service life.
• Remote Training: For small clients or those in remote areas, we offer free online training via Zoom/Teams. We also provide a detailed “User Manual” (available in 10 cànainean: Sìneach, Sasannach, Spàinneach, Frangach, Gearmailteach, Iapanach, Korean, Arabach, Ruiseanach, Portugalach) with step-by-step videos (accessible via QR code on the packaging).

2.2 Sgrùdadh Càileachd & Barantas

• Ùine Barantais: Tha sinn a 'toirt seachad a 12-month warranty for all standard products (from the date of delivery). The warranty covers:
  • Premature fraying or tearing (not caused by improper use).
  • Significant loss of absorbency (≤50% of original capacity) a-staigh 50 nighe.
  • Lint release exceeding 10 mg/m² (affecting cleaning results).
• Sgrùdadh Càileachd: For key clients (annual purchase ≥50,000 pieces), we conduct quarterly quality follow-ups. Our team will contact you to collect feedback on cloth performance, and if issues arise, we provide solutions within 3 làithean obrach (m.e., free replacement, on-site troubleshooting).
• Pròiseas Tagraidh: To file a warranty claim:
  1. Send photos/videos of the issue, along with the order number and batch number (printed on the packaging).
  2. Our quality team verifies the issue within 2 làithean obrach.
  3. We provide a solution: free replacement (shipped within 5 làithean obrach), partial refund, or on-site repair (for large clients).

2.3 Ath-chur & Refund Policy

• Ath-chur: If the cloths do not meet your requirements (m.e., meud, dath, coileanadh) a-staigh 7 làithean lìbhrigidh (unused and unopened), we offer free replacement—you only need to return the products (we cover the return shipping cost for orders ≥1,000 pieces).
• Ath-dhìoladh: For quality issues that cannot be resolved by replacement (m.e., batch-wide defect), we offer a full refund (including shipping cost) a-staigh 10 working days of verification.

Ceistean Cumanta (Ceistean Cumanta)

Below are answers to the most common questions from our clients—if you have other inquiries, feel free to contact our sales team.

Q1: Is WINIW Non Woven Microfiber Cleaning Cloth safe for all surfaces? Can it be used on matte car paint?

A1: Tha, our cloth is safe for 99% of surfaces, including matte car paint, which is more scratch-sensitive than glossy paint. For matte paint, we recommend the 150 gsm ultra-soft variant (0.1–0.3 micron fibers) and advise:

• Always dampen the cloth before use (dry wiping increases scratch risk).
• Use only water or matte paint-specific cleaners (avoid wax or polish, which can alter the matte finish).
• Wipe in straight lines (not circular motions) to minimize visible marks.

We tested the cloth on 100+ matte paint samples (BMW, Audi) and found no scratches or finish damage when used correctly.

Q2: Can the cloth be used with bleach or strong chemicals (m.e., oven cleaners)?

A2: Chan eil. Bleach and strong alkaline/acidic chemicals (pH <3 neo >11, m.e., oven cleaners, toilet bowl cleaners) break down the PET/PA fibers, reducing absorbency and service life. Mar eisimpleir, using bleach once can shorten the cloth’s life from 50 washes to 10–15 washes.

Recommended alternatives:

• For kitchen stains: Use neutral dish soap (pH 6-8).
• For bathroom mildew: Use a mild mildew remover (pH 7-9).
• For industrial degreasing: Use solvent-based cleaners compatible with PET/PA (m.e., isopropanol, spioradan mèinnearach)—test a small area first.

Q3: How many times can the cloth be washed? Will it lose absorbency after repeated washing?

A3: Under proper washing conditions (≤60°C, neutral detergent, no fabric softener), our standard variant can be washed 50–80 times, and the heavy-duty variant 80–120 times. It retains ≥85% of its original absorbency after 50 washes—far better than woven microfiber cloths (which retain only 50% absorbency after 30 nighe).

To maintain absorbency:

• Avoid fabric softeners (they coat fibers with a waxy layer that blocks water absorption).
• Wash separately from cotton (cotton lint clogs microfiber gaps).
• Air dry when possible (tumble drying on high heat damages polyamide fibers).

Q4: Is the antibacterial variant safe for babies or people with sensitive skin?

A4: Tha. Our antibacterial cloth uses silver ion (Ag⁺) technology that is FDA-approved and Oeko-Tex® Class I certified (sàbhailte dha leanaban). The silver ions are bonded to the fibers (not coated), so they do not leach out during use or washing—there is no risk of skin irritation or allergic reactions.

We tested the cloth on 500 daoine le craiceann mothachail (eczema, dermatitis) and found no cases of irritation. It is safe for cleaning baby bottles, high chairs, and children’s toys.

Q5: Can I order custom colors? What color options are available?

A5: Tha, we offer custom colors to match your brand or workflow (m.e., color-coded cloths for different cleaning areas). Standard colors include white, gorm, uaine, buidhe, dearg, and black. For custom colors, we require a minimum order quantity (MOQ) à 5,000 pieces per color (10,000 pieces for neon or metallic colors).

Fastachd dath: All our cloths have a color fastness rating of 4–5 (AATCC 61), meaning they do not fade or bleed in washing (even after 50 nighe). This is critical for color-coded systems (m.e., red for bathroom, blue for kitchen) to avoid cross-contamination.

C6: What is the MOQ for standard and customized orders? Can I order small quantities for testing?

A6:

• Òrdughan àbhaisteach: MOQ is 1,000 pìosan (mix of sizes/variants allowed, m.e., 500 pieces of 30x40cm and 500 pieces of 40x40cm).
• Customized Orders: MOQ depends on customization type:
  • Size/shape customization: 3,000 pìosan.
  • Brandadh (printing/embroidery): 5,000 pìosan.
  • Gnàthachadh coileanaidh (fiber ratio, stuthan cur-ris): 10,000 pìosan.
• Testing Samples: Bidh sinn a’ tabhann samples saor an-asgaidh (1–5 pieces) for standard variants—you only need to cover the shipping cost (usually $10–$30 via DHL). For customized samples, we charge a small fee ($50–$200, refundable when you place a formal order ≥MOQ).

Q7: How does your non woven microfiber cloth compare to woven microfiber cloths on the market?

A7: The key differences lie in structure, bogachd, and durability—our non woven cloth outperforms woven alternatives in most scenarios:

Comharra	WINIW Non Woven Microfiber	Woven Microfiber
Bog (Cladach A)	20—30 (suede-like, no scratch risk)	40—50 (rougher, may scratch delicate surfaces)
Luas Absorptachaidh	≤3 diogan (structar porous)	5–8 seconds (dense weave slows absorption)
Seasmhachd nighe	50-120 nighe	30–50 washes (weave loosens over time)
Sgaoileadh Lint	≤5 mg / m² (gun lint)	10–15 mg/m² (frayed yarns shed lint)
Sùbailteachd	Àrd (fits curved surfaces like car headlights)	Ìosal (stiff weave struggles with curves)

Moladh: Choose non woven for scratch-sensitive surfaces (peant càr, eileagtronaigeach), high-absorption needs (tiormachadh), and long-term use. Choose woven only for heavy scrubbing (m.e., floor tiles) where stiffness is an advantage.

Fiosrachadh conaltraidh & Pròiseas Co-obrachaidh

WINIW welcomes clients from all industries—whether you’re a small car detailing shop, a large electronics manufacturer, or a retail brand looking for private-label cleaning cloths. Our team is ready to provide professional solutions tailored to your needs.

Fiosrachadh conaltraidh

• • Ainm na Companaidh: WINIW Nonwoven Materials Co., Earr.
  • Post-d: [email protected]
  • Fòn: 0086-189-6568-7670
  • Làrach-lìn: www.panonwoven.com
  • Seòladh: 1-1-417 Xinjinghuating Luocheng Town Huian County Quanzhou City City Fujian Province China

Pròiseas Co-obrachaidh Coitcheann

1. Rannsachadh & Dearbhadh riatanas: You submit an inquiry (via email, làrach-lìn, no fòn) with details like application scenario, required quantity, variant (if known), and delivery time. Bidh an sgioba reic againn a’ freagairt taobh a-staigh 1 working day to clarify requirements and provide a preliminary quotation.
2. Solarachadh Sampall & Deuchainn: We send free standard samples (or customized samples with a fee) airson do dheuchainn. You can test performance (uchd-mhacachd, bogachd, lint) or conduct on-site trials (m.e., car detailing, glanadh eileagtronaigeach). We provide technical support during testing if needed.
3. Quotation Finalization & Soidhnigeadh Cùmhnant: After sample approval, bidh sinn a’ cur a-mach luachan foirmeil (gabhail a-steach prìs, ùine lìbhrigidh, teirmean pàighidh, agus barantas). Both parties negotiate and sign a sales contract (ri fhaighinn ann an Sìnis agus Beurla, with clear terms on quality, delivery, and after-sales).
4. Pàigheadh ​​Tasgaidh: You pay the deposit (30% airson teachdaichean ùra, 20% airson teachdaichean cunbhalach) according to the contract. We confirm receipt of the deposit and start production.
5. Riochdachadh & Sgrùdadh Càileachd: We complete production within the agreed lead time. Mus tèid an lìbhrigeadh, our quality team conducts a full inspection (feartan fiosaigeach, coileanadh, coltas) and sends an inspection report to you for confirmation.
6. Pàigheadh ​​Cothromachaidh & Luingearachd: You pay the balance (70%/80%) after confirming the inspection report. Bidh sinn a’ rèiteachadh luingearachd (sea/air/express) mar a chaidh aontachadh, provide all shipping documents, and track the shipment until it arrives at your location.
7. After-Sales Follow-Up: Às deidh an lìbhrigeadh, we contact you to confirm receipt and collect feedback. Rè na h-ùine barantais, we provide regular quality tracking and handle any issues promptly.

Co-dhùnadh

WINIW Non Woven Microfiber Cleaning Cloth represents the next generation of cleaning materials—combining advanced non woven technology, premium PET/PA microfibers, and customizable features to meet the diverse needs of car care, glanadh taighe, electronics maintenance, agus cleachdadh gnìomhachais. Its core advantages—scratch resistance, àrd sùghaidh, long durability, and lint-free performance—solve the pain points of traditional cleaning cloths (cotan, woven microfiber) and deliver exceptional value for both professional and daily use.

What sets us apart is not just the product, but the comprehensive support we provide: from tailored customization (to fit your unique workflow) to global logistics (ensuring on-time delivery) and after-sales service (maximizing product lifespan). We are committed to being your trusted partner in cleaning solutions—helping you improve efficiency, cosgaisean a lùghdachadh, and enhance customer satisfaction.

Whether you need a single variant for car drying or a full range of customized cloths for your cleaning business, WINIW has the expertise and resources to deliver. Cuir fios thugainn an-diugh gus sampallan iarraidh, get a quotation, or discuss your customization needs—let’s build a cleaner, more efficient future together.

WINIW – Redefine Cleaning with Non Woven Microfiber Excellence.