Mea Mea Hana Mea Mea Hana Mea Mea Mea Mea Hana lole Microfiber Non Woven

wehewehe

Ka lole Microfiber i ulana ole ia | ʻO Kina ka mea kūʻai nui & Mea hana – WINIW Nonwoven Materials Co.Ltd.

1. Nānā Huahana: WINIW Non Woven Microfiber Fabric – Nā ʻenehana ʻelua no nā noi hana kiʻekiʻe.

Ma ke ʻano he alakaʻi ʻO ka mea hoʻolako a me ka mea hana ma Kina o na lole lole i ulana ole ia, WINIW Nonwoven Materials Co., Ltd. loea i ka hana ʻana i ka premium Ka lole Microfiber i ulana ole ia—Ke hāʻawi nei i ʻelua mau ʻano ʻokoʻa i kūpono i nā pono ʻoihana like ʻole: Ka lole Microfiber i ulana ʻole ʻia a Spunlace Non Woven Microfiber Fabric. Hana ʻia no nā mea kūʻai aku B2B ma ka hoʻomaʻemaʻe, lāʻau lapaʻau, kaʻa kaʻa, lole lole hale, a me nā ʻoihana ʻoihana, ʻO kā mākou mau lole microfiber i ulana ʻole ʻia e hoʻohana i nā fiber ultra-fine (≤1.0 dtex) a me ka hana pololei no ka hāʻawi ʻana i ka absorbency kiʻekiʻe, ka lōʻihi, a me ka palupalu—ke ʻoi aku ka maikaʻi o nā mea ulana ʻole (pulupulu, poliester) a me nā fiber maoli i nā hiʻohiʻona makemake nui.

Aia ma ka puʻuwai o kā mākou huahana ka wehewehe ʻana o "microfiber": nā pulupulu me ke anawaena o 0.1-1.0 dtex (1/50 ka mānoanoa o ka lauoho kanaka), e hana ana i kahi ili nui (3–5x ka nui o ka fiber maʻamau) no ka hoʻonui ʻia ʻana o ka wai, pahele lepo, a me ka hooluolu maalea. Ma ka hāʻawi ʻana i ʻelua ʻenehana hana, Hoʻoponopono mākou i nā pono o nā mea kūʻai aku:

• Ka lole Microfiber i ulana ʻole ʻia: He ʻano hana kaumaha (160–1000gsm) hana ʻia e nā microfibers e hoʻopaʻa ʻia me ka ʻenekini me nā nila ʻāʻī — kūpono no nā noi e koi ana i ka ikaika tensile kiʻekiʻe., nui, a me ka lōʻihi (e.g., nā papa hoʻomaʻemaʻe ʻoihana, nā kānana kaʻa).
• Spunlace Non Woven Microfiber Fabric: He māmā māmā, ʻano ʻano palupalu loa (30–150gsm) i hoʻokumu ʻia e nā microfibers hydro-entangling me nā pahu wai kiʻekiʻe-i hoʻolālā ʻia no ka hoʻopili ʻana i ka ʻili a me ka pololei. (e.g., holoi holoi kino, huahana mālama pēpē, lole lole hale nani).

Me ka mana hana makahiki o 15,000 mau tona (8,000 tona no ka kui kui; 7,000 tona no ka spunlace) ma kela aoao 14 laina laʻa, Hāʻawi mākou i ka noi B2B honua-mai nā kauoha maʻamau liʻiliʻi (no ka hoʻomohala huahana) i ka lako nui nui (1,000+ tons / makahiki no ka hoʻomaʻemaʻe multinational a me nā hōʻailona lapaʻau). Hoʻopili ko mākou mau lole i nā kūlana honua (ISO 9001, OEKO-TEX® Kūlana 100, FDA 21 CFR 177.1520) a ua hilinaʻi ʻia e 350+ nā mea kūʻai aku i loko 55+ ʻāina, me nā inoa alakaʻi i ka mālama home (Procter & Mea hoolako piliwaiwai), nā mea lapaʻau (Johnson & Johnson mau hoa), a me kaʻa kaʻa (ʻO nā mea kūʻai aku Toyota tier-1). Inā makemake ʻoe i kahi lole ʻōpala no ka hoʻomaʻemaʻe kaumaha a i ʻole kahi mea maʻalahi no ka ʻili ʻili, Hāʻawi nā lole microfiber i ulana ʻole ʻia e WINIW i ka hana i kākoʻo ʻia i kākoʻo ʻia e ka ʻoihana hana maikaʻi a me ka logistic pūnaewele o Kina..

2. Nā Kūlana ʻenehana: WINIW Non Woven Microfiber Fabric – Nā ʻāpana kikoʻī

Ua wehewehe ʻia ka WINIW's Non Woven Microfiber Fabric e nā ʻāpana ʻenehana pololei, me ka ʻano like ʻole i hoʻopaʻa ʻia i ka nila e pili ana i nā kikoʻī i hāʻawi ʻia (160–1000gsm, 0.5–2.0mm mānoanoa, 137knm laula) a me ka ʻano like ʻole spunlace e hoʻopiha ana me nā ʻāpana i hoʻohālikelike ʻia i ka ʻoihana no nā noi māmā. Aia ma lalo iho kahi hōʻuluʻulu piha o nā ʻano like ʻelua - koʻikoʻi no nā mea kūʻai aku B2B e hōʻoia i ka hoʻohālikelike ʻana me kā lākou laina hana a me nā koi hoʻohana hope..

ʻĀpana	Ka lole Microfiber i ulana ʻole ʻia	Spunlace Non Woven Microfiber Fabric	ʻAno hoʻāʻo	ʻOihana Nui
ʻenehana hana	Kuʻi kui (ka hoʻopaʻa ʻia ʻana o ka fiber mechanical ma o nā kui kui)	Spunlace (hydro-entanglement ma o ka wai kahe kiʻekiʻe)	Nānā Kiʻi + ʻIkepili Hoʻopaʻa Fiber	Kuʻi ʻia ka nila: Hoʻokumu i ka nui / lōʻihi; Spunlace: Hoʻokumu i ka palupalu/like—kūlike me nā pono o ka noi (hana kaumaha vs. pili-ili).
Huina Mea Maka	80% PET (Polyethylene Terephthalate) + 20% PA6 (Nylon 6) microfibers (0.3–0.8 dtex)	70% PET + 30% PA6 microfibers (0.1–0.5 dtex); ʻO 5-10% fiber bamboo koho no nā ʻano ʻokoʻa pili kaiaola	FTIR Spectroscopy (ASTM D5594)	ʻO ka hui pū ʻana o PET/PA6 ka ikaika (PET) a me ka apo (PA6); ʻoi aku ka maikaʻi o nā fiber i loko o ka spunlace e hoʻonui i ka palupalu/absorbency.
Grammage (Kaumaha no kēlā me kēia ʻāpana)	160–1000 gsm (nā pae maʻamau: 160-300 gsm no ka hana waena; 300-600 gsm no ka hana kaumaha; 600-1000 gsm no ka ʻoihana)	30–150 gsm (nā pae maʻamau: 30-60 gsm no ka holoi ʻana; 60-100 gsm no ka lāʻau lapaʻau; 100-150 gsm no nā lole lole home)	Kaulike (ASTM D3776)	Kuʻi ʻia ka nila: ʻO ka grammage kiʻekiʻe = ka lōʻihi kiʻekiʻe (hoohana hana); Spunlace: Haʻahaʻa grammage = māmā / hanu (holoi holoi).
mānoanoa	0.5–2.0 mm (160gsm: 0.5mm; 1000gsm: 2.0mm)	0.1–0.8 mm (30gsm: 0.1mm; 150gsm: 0.8mm)	Ana Kikohoʻe Mānoanoa (ASTM D1777)	Kuʻi ʻia ka nila: Mānoanoa = ʻoi aku ka nui (papa kānana / hoʻomaʻemaʻe); Spunlace: ʻOliʻiliʻi = maʻalahi (holoi holoi / lole lapaʻau).
Laulā	137 knm (paa; ʻōwili mau, anawaena kumu: 76mm)	100–220 knm (hiki ke hoʻopilikino; maʻamau: 160knm, 200knm)	Kaliper kikohoʻe (ASTM D3774)	Kuʻi ʻia ka nila: 137cm kūpono i nā laina hana ʻoihana maʻamau; Spunlace: Nā lole laulā ākea e holoi i ka hoʻololi ʻana (liʻiliʻi) i nā hale lole lole (nui).
Ikaika U'i (Kuhikuhi Mīkini/MD)	≥150 N/5cm (160gsm: 150N; 1000gsm: 400N)	≥50 N/5cm (30gsm: 50N; 150gsm: 120N)	Mīkini Hoʻāʻo Universal (ASTM D882)	Kuʻi ʻia ka nila: Kū'ē ka ikaika kiʻekiʻe i ka haehae (ʻāwīwī ʻoihana); Spunlace: ʻO ka ikaika haʻahaʻa e kūpono i ka lawelawe mālie (holoi holoi).
Ka Waimaka	≥30 N (160gsm: 30N; 1000gsm: 80N)	≥10 N (30gsm: 10N; 150gsm: 25N)	ʻO Elmendorf Tear Tester (ASTM D1004)	Kuʻi ʻia ka nila: Kū i ka hoʻohana kaumaha (e.g., ka holoi papahele); Spunlace: Kū'ē i ka haehae ʻana i ka wā hoʻopaʻa / hoʻohana (e.g., holoi huki).
Ka hoʻopaʻa ʻana (Wai)	≥400% o ka paona lole (160gsm: 400%; 1000gsm: 600%)	≥600% o ka paona lole (30gsm: 600%; 150gsm: 800%)	ʻO ka hoʻāʻo ʻana (AATCC 79)	Spunlace: ʻOi aku ka hoʻopalekana (kūpono no nā holoi holoi / lāʻau lapaʻau); Kuʻi ʻia ka nila: ʻO ka hoʻopaʻa haʻahaʻa (nā kaulike me ka lōʻihi).
ʻoluʻolu (Manaʻo lima)	Papa 3–4 (1= ʻoʻoleʻa, 5= ʻoluʻolu loa; Pūnaehana Loiloi ʻo Kawabata)	Papa 4–5 (palupalu loa)	Pūnaehana Loiloi ʻo Kawabata (KES-F)	Spunlace: ʻAha-māmā (aloha-ili: holoi pēpē / lāʻau lapaʻau); Kuʻi ʻia ka nila: ʻAno palupalu (hana ʻoihana/kaumaha).
Palekana Kemika	Kū'ē i ka 10% nā ʻakika (H₂SO₄), 10% alkalis (NaOH), nā mea hoʻoheheʻe (ethanol, ʻaila mineral)	Kū'ē i ka 5% nā ʻakika, 5% alkalis, nā disinfectants (isopropyl alcohol)	Hoao Kaiapuni (ISO 175:2010)	Kuʻi ʻia ka nila: Kū'ē kiʻekiʻe (ka hoʻomaʻemaʻe ʻoihana me nā kemika ʻoʻoleʻa); Spunlace: Kūʻē mālie (mea hoʻomaʻemaʻe hale/lāʻau).
Nā palapala hōʻoia	ISO 9001, OEKO-TEX® Kūlana 100 (Papa II), REACH	ISO 9001, OEKO-TEX® Kūlana 100 (Papa I), FDA 21 CFR 177.1520, CE (IN 13795 no ka lapaau)	Hoʻāʻo ʻEkolu (SGS/Intertek)	Spunlace: Papa I (palekana pēpē)/FDA (pili meaʻai); Kuʻi ʻia ka nila: Papa II (hoʻohana maʻamau)/REACH (ʻoihana hoʻokō).

3. Nā hiʻohiʻona kumu: No ke aha i ʻoi aku ka maikaʻi o ka WINIW Non Woven Microfiber Fabric i nā mea ʻē aʻe

ʻO ka WINIW's Non Woven Microfiber Fabric-ʻo nā nila i kuʻi ʻia a me nā ʻano like ʻole spunlace - hāʻawi i nā pono kūʻokoʻa e hoʻoponopono i nā wahi ʻeha nui no nā mea kūʻai B2B (e.g., haʻahaʻa lōʻihi, ʻinoʻino ka absorbency, kūlana kūlike ʻole) a ʻoi aku ka maikaʻi ma mua o nā mea ulana ʻole kahiko (pulupulu, poliester) a me nā lole microfiber o nā mea hoʻokūkū. Aia ma lalo nā hiʻohiʻona kūʻokoʻa o kēlā me kēia ʻano.

3.1 Ka lole Microfiber i ulana ʻole ʻia: Ka lōʻihi & Nui no ka Hoohana Kaumaha

Hoʻolālā ʻia kā mākou ʻano kuʻi kui kui no ka hana kiʻekiʻe, nā noi hana koʻikoʻi-ka hoʻohana ʻana i ka hoʻopili ʻana i ka fiber mechanical e hana i kahi paʻa, ka lole bulked me ka ikaika a me ka lōʻihi:

• Kiekie Tensile & Ka Waimaka: Me ka ikaika tensile ≥150 N/5cm (a hiki i 400 N/5cm no 1000gsm) a me ka ikaika haehae ≥30 N, kū ka lole i ka hoʻohana ikaika:
  • ʻOihana hoʻomaʻemaʻe pad: Hoʻomanawanui 500+ nā pōʻai holoi (vs. 100– 200 pōʻai no nā pulu pulupulu) me ka haehae ole.
  • Nā kānana kaʻa: Mālama i ka pono o ka hale ma lalo o ke kahe ea kiʻekiʻe (20–30 m/s) and temperature fluctuations (-40°C a i +80°C).

  B2B Impact: A US industrial cleaning brand switched from cotton-polyester pads to WINIW’s 600gsm needle punched microfiber pads. Their product lifespan increased by 300%, reducing customer replacement costs by 60% and boosting repeat purchases by 25%.

• High Bulk & Porosity: The needle punching process creates a 3D porous structure (porosity ≥70%) with controlled thickness (0.5–2.0mm)—ideal for:
  • kānana: Traps particles (5-50μm) in automotive air filters and industrial dust collectors, with air permeability ≥100 L/m²/s (balances filtration efficiency and flow rate).
  • ʻO ke kani kani: Used in automotive door panels and industrial machinery enclosures—absorbs 30–40% of noise (1000–2000 Hz) due to bulked fiber structure.

  B2B Impact: Ua hoʻohana kekahi mea kūʻai kaʻa kaʻa Kina i ka lole 800gsm o WINIW i kuʻi ʻia no ka pani pani puka.. Ua hōʻemi ka lole i ka walaʻau i loko o ka hale 3 dB, ka hoʻomaikaʻi ʻana i nā helu ʻoluʻolu o ka mea kūʻai aku ma 12%.

• Kemika & Ke kū'ē UV: ʻO ka 80/20 Kūʻē ka hui ʻana o PET/PA6 10% nā ʻakika, 10% alkalis, a me nā mea hoʻoheheʻe ʻoihana—kūpono no:
  • Hoʻomaʻemaʻe mea kanu kemika: ʻO nā holoi holoi a me nā pad e mālama i nā ʻōpala me ka ʻole o ka hōʻino.
  • Nā noi waho: ʻO nā pale lepo lepo e paʻa ai ka ikaika ma hope 1,000 hola o ka ʻike ʻana o UV (≥80% paʻa paʻa, ISO 4892-2).
• Uku-kumu no ka hoohana nui: ʻO ka laulā 137cm paʻa a me ka grammage kiʻekiʻe (160–1000gsm) e hōʻemi i ka ʻōpala i nā laina hana ʻoihana (≤3% ʻōpala vs. 8-12% me nā lole laula maʻamau). No nā mea kūʻai B2B e kauoha ana 500+ tona/makahiki, ʻO nā ho'ēmi nui e hōʻemi ana i nā kumukūʻai pākahi me 10-15%.

3.2 Spunlace Non Woven Microfiber Fabric: ʻoluʻolu & Absorbency no nā noi pololei

Hoʻolālā ʻia kā mākou ʻano ʻano spunlace no ka pili ʻili, pololei, a me nā noi kiʻekiʻe-absorbency-hoʻohana i ka hydro-entanglement e hana i kahi ultra-soft, lole lint me ka paʻa wai ʻokoʻa:

• Ultra-Malu & Pili-ʻili: Me ka papa palupalu Kawabata o 4-5 (palupalu loa) a me ka lint-free surface, kūpono ka lole no nā noi pili:
  • Nā holoi pēpē: OEKO-TEX® Papa I i hooiaioia (palekana no ka ʻili hānau hou), me ka huhū ʻole i hōʻike ʻia ma ka hoʻāʻo ʻana o nā mea kūʻai (vs. 15% hoʻonāukiuki me nā holoi polyester).
  • Nā lole lapaʻau: ʻoluʻolu i nā ʻeha a me ka ʻili palupalu, hōʻemi i ka ʻehaʻeha o ka mea maʻi i ka wā e hoʻololi ai i ka lole.
  • Hoʻomaʻemaʻe uila: ʻO ka hoʻolālā lint-free pale i ke koena ma nā pale a me nā papa kaapuni (koʻikoʻi no ka hana ʻenehana).

  B2B Impact: Ua hoʻohana kekahi brand mālama pēpē ʻEulopa i ka microfiber spunlace 50gsm o WINIW no ka holoi ʻana i nā pēpē.. Ua hōʻike ʻia nā noiʻi mea kūʻai aku a 40% ka ho'ēmiʻana i nā hoʻopiʻi "kaʻiliʻili"., a me ka huahana i loaʻa 10% māhele makeke mai nā mea hoʻokūkū.

• ʻO ka Absorbency Kūʻē: Hoʻopili i ka 600-800% o kona kaumaha i ka wai (2–3x kiʻekiʻe ma mua o ka pulupulu a me 1.5x kiʻekiʻe ma mua o ka microfiber kuʻikuʻi)—kūpono no:
  • Holoi hale: Hoʻopaʻa i nā ʻōpala (kofe, aila) i ka holo hookahi, e hoemi ana i ka hoohana ana e holoi 30%.
  • Nā holoi holoi lāʻau: Hoʻopili koke i nā wai kino a me nā disinfectants, ka hoʻomaikaʻi ʻana i ka mālama ʻana i ka maʻi ma nā halemai.
  • Nā huahana mālama holoholona: ʻO nā pad absorbent e paʻa ana i ka makū, mālama i nā holoholona i maloʻo a hoʻemi i ka pilau.

  B2B Impact: Ua hoʻokuʻu ʻia kahi brand mālama home US "Ultra-Absorb" holoi kīhini me ka hoʻohana ʻana i ka lole spunlace 60gsm o WINIW.. Ua hoʻonui ʻia nā kūʻai aku e 35% i loko 6 mahina, alakaʻi ʻia e ka mea kūʻai aku i ka hoʻomaikaʻi ʻana no ka hiki i ka holoi ʻana ke "hoʻomaʻemaʻe me ka liʻiliʻi liʻiliʻi."

• Kaulike & Lin-Free: Hoʻokumu ke kaʻina hana hydro-entanglement i ka hāʻawi like ʻana o ka fiber (ʻaʻohe clumping) a me ka lint-free surface—koikoi no:
  • Hana lāʻau lapaʻau: Kāohi i ka hoʻohaumia ʻana i ka fiber i loko o nā lumi maʻemaʻe a me nā hoʻonohonoho ʻoki (hui me ISO 14644-1 Papa 8 nā kūlana).
  • Pai lole lole: Hāʻawi i kahi kumu maʻemaʻe no ka paʻi kikohoʻe (nā hoʻolālā maʻamau no nā lole home e like me nā pillowcases).
• Laulā hiki ke hoʻololi & Kaumaha: Me ka laulā ākea o 100-220cm (hiki ke hoʻopilikino) a me ka grammage o 30-150gsm, kūpono ka lole i nā laina hana like ʻole:
  • Holoi ʻano liʻiliʻi (100knm laula): Hoʻemi i ka ʻōpala i nā mīkini hoʻololi holoi.
  • ʻO nā lole lole home-nui (220knm laula): He kūpono no nā lole moe a me nā pale, e hoemi ana i ka helu hili (a me ka hoomaunauna) na 50%.

3.3 Nā Pōmaikaʻi Kaʻana like o nā ʻano ʻelua

Ma waho aʻe o kā lākou mau hiʻohiʻona kūikawā, Hāʻawi nā lole microfiber ʻaʻole i ulana ʻia ʻelua WINIW i nā pono like e ʻoluʻolu i nā mea kūʻai aku B2B āpau.:

• 100% PET/PA6 Blend no ka Hana Pono: ʻO ka 70-80% PET + 20-30% PA6 hui pū ʻana i ka paʻa o PET (ikaika / lōʻihi) a me ka hydrophilicity o PA6 (hoʻopaʻa ʻana)—ʻoi aku ka maikaʻi 100% poliester (haʻahaʻa haʻahaʻa) a 100% nylon (ikaika haʻahaʻa) lole lole.
• Pili-pili & Hoʻomau:
  • Hiki ke hana hou: ʻO nā fiber PET/PA6 100% hiki ke hana hou, me ka ʻōpala ma hope o ka hana ʻana i hana hou ʻia i mau mea ʻole i ulana hou ʻia (hōʻemi ʻana i ka ʻōpala ʻāina e 80%).
  • Hiki ke hoohana hou: Hiki ke holoi ʻia nā ʻano ʻelua (40°C pōʻai mālie), me ke kui kui ku'i 'ano like 'ole 50+ holoi (kūpono no nā pad hoʻomaʻemaʻe hou) a ʻo ka spunlace ʻokoʻa ka lōʻihi o 10-15 holoi (kūpono no nā holoi holoi hoʻohana hou).
  • Haʻahaʻa-Impact Production: Hoʻohana kā mākou hale hana 25% ikehu lā a hana hou 95% o ka wai kaʻina hana—e hoʻemi ana i ka hoʻokuʻu kalapona i 1.6 kg CO₂/kg lole (vs. 2.8 kg CO₂/kg no nā mea ulana ʻole maʻamau).
• Kūlike Kūlike & Hoʻolikelike ʻo Batch-to-Batch: Ka hoomalu maikai (hoʻāʻo mea maka, ka nānā ʻana ma ka laina, hoʻāʻo pūʻulu hope) hōʻoia ≤±3% hoʻololi i ka grammage, mānoanoa, a me ka ikaika-koʻikoʻi no nā mea kūʻai aku B2B me nā laina hana automated (e.g., holoi hoʻololi, hana kānana) e koi ana i na waiwai waiwai.

4. Kaʻina Hana Hana: Pehea ka hana ʻana o WINIW i ka lole microfiber ʻaʻole i ulana ʻia

Hana ʻia ka lole Microfiber Non Woven o WINIW ma o ʻelua ʻokoʻa, nā kaʻina hana pololei—kuʻi ʻana i ka nila a me ka spunlace—ua hoʻopaʻa ʻia kēlā me kēia mea e hana i nā waiwai kūʻokoʻa o kā lākou mau ʻano like ʻole.. Aia ma lalo kahi wehewehe kikoʻī o nā kaʻina hana ʻelua, e hōʻike ana i nā ʻanuʻu koʻikoʻi e hōʻoia i ka maikaʻi a me ka hana.

4.1 ʻO ke kaʻina hana hana lole microfiber non-woven

Hana ʻia ka ʻano like ʻole o ke kui kui 8 ʻanuʻu, ka nānā 'ana i ka mechanical fiber entanglement e kūkulu i ka ikaika a me ka nui:

1. Hoʻomākaukau Mea Maka:
   • Huihui 80% PET microfibers (0.3–0.8 dtex, 38mm ka lōʻihi) a 20% PA6 microfibers (0.3–0.8 dtex, 32mm ka lōʻihi) i loko o kahi huila kiʻekiʻe (1,200 rpm) no ka mea 30 mau minuke e hōʻoia i ka hāʻawi like ʻana.
   • E hoʻomaloʻo i nā fiber i hui ʻia i loko o kahi mea maloʻo maloʻo (160°C no PET, 80°C no PA6) e ho'ēmi i ka makū i ka ≤0.05% - ka pale ʻana i ka haki ʻana o ka fiber i ka wā e hana ai.
2. Kāleka & Hoʻokumu pūnaewele:
   • E hānai i nā pulu maloʻo i loko o ka mīkini kāleka me nā wili wili, ʻo ia ka mea e hoʻokaʻawale a hoʻopololei i nā kaula i kahi lahilahi, ʻo ka pūnaewele hoʻi (mānoanoa: 5–10mm, laula: 137knm).
   • Holoi i ka pūnaewele (papa ma nā kihi 45°) e hoʻoikaika i ka ikaika ma nā mīkini ʻelua a me nā ʻaoʻao keʻa-koʻikoʻi no nā noi kaumaha.
3. Kuʻi Needle:
   • E hanai i ka pūnaewele puni honua ma o ka mea ulana kui i lako me 15,000–20,000 mau kui kui. (anawaena: 0.5–0.8mm).
   • E hoʻoponopono i ka nui o ka punch (nā nila/cm²) ma muli o ka grammage: 20–40 nila/cm² (160–300gsm), 40–60 nila/cm² (300–600gsm), 60–80 nila/cm² (600–1000gsm).
   • Kuʻi nā nila ma ka pūnaewele ma 800-1,200 paʻi / minuke, hoʻopaʻa ʻana i nā lau a hui pū, lole i hoʻopaʻa ʻia.
4. Hoʻonohonoho wela:
   • E hele i ka lole ma o ka mīkini stenter (160–180°C) e hoʻonohonoho i ka hoʻolālā fiber-e hoʻemi ana i ka shrinkage i ≤3% (ASTM D1204) a me ka hoʻonui ʻana i ke kūpaʻa dimensional.
5. Kalena (Koho):
   • No nā noi e koi ana i kahi ʻili maʻalahi (e.g., nā kānana), e hele i ka lole ma nā ʻōwili kalena wela (120–140°C) e hoʻopili i ka ʻili me ka hōʻemi ʻole i ka porosity.
6. Lapaau Kemika (Koho):
   • E noi i ka antibacterial (iona kala) a i ʻole nā ​​lāʻau pale UV ma o ka padding (kiʻekiʻe kiʻi: 20–30%) no nā hana ʻoihana/waho. E ho'ōla ma 120-150 ° C e hoʻoponopono i ka lāʻau.
7. ʻoki ʻana & Ka makani:
   • E ʻoki i ka lole mau i ka laulā paʻa 137cm (ʻaʻohe hoʻoponopono) me ka hoʻohana ʻana i nā ʻāpana pololei.
   • E puhi i ka lole ma luna o nā ʻāpana pepa 76mm anawaena e hana i nā ʻōwili o 50-200m ka lōʻihi (ma muli o ka grammage: 200m no 160gsm; 50m no 1000gsm).
8. Ka Mana Mana:
   • E ho'āʻo i kēlā me kēia ʻōwili no ka grammag (ASTM D3776), ikaika tensile (ASTM D882), a me ka mānoanoa (ASTM D1777).
   • E hana i ka ho'āʻo pūʻulu no ke kūʻē kemika (ISO 175) a me ka pale ʻana o UV (ISO 4892-2) no na kauoha hana.

4.2 ʻO Spunlace Non Woven Microfiber Fabric Production Process

Hana ʻia ka ʻano ʻano spunlace ma 9 ʻanuʻu, e kālele ana i ka hydro-entanglement e hana i ka palupalu a me ke kūlike:

1. Hoʻomākaukau Mea Maka:
   • Huihui 70% PET microfibers (0.1–0.5 dtex, 32mm ka lōʻihi) a 30% PA6 microfibers (0.1–0.5 dtex, 28mm ka lōʻihi) i loko o kahi huila (1,000 rpm) no ka mea 25 minuke. No nā ʻano like ʻole eco-friendly, hoʻohui i 5-10% microfibers ʻohe.
   • E hoʻomaloʻo i ka hui ʻana i loko o kahi mea maloʻo maloʻo (150°C no PET, 70°C no PA6) i ka mākū ≤0.03%—koʻikoʻi no ka hoʻoponopono ʻana i ka fiber maikaʻi.
2. Kāleka & Hoʻokumu pūnaewele:
   • E hānai i nā pulupulu i loko o ka mīkini kāleka pololei (me nā wili wili ʻoi aku ka maikaʻi) e hana i kahi lahilahi, pūnaewele like ʻole (mānoanoa: 2–5mm) me ka hoʻonohonoho pono ʻana o ka fiber—e hōʻoia ana i ka palupalu a me ka ikaika.
   • Hana i kahi pūnaewele mau (laula: 100–220cm, hiki ke hoʻopilikino) a hānai iā ia i loko o ka mīkini spunlace.
3. ʻAha-Entanglement (Spunlace):
   • E hele i ka pūnaewele ma o ke ʻano o nā poʻo jet wai kiʻekiʻe (kaomi: 50–200 bar). Nā lele wai (anawaena: 0.1–0.2mm) e hoʻopaʻa i nā kaula ma ka hoʻoikaika ʻana iā lākou ma o ka pūnaewele—e hana ana i kahi lole paʻa me ka ʻole o nā mea hoʻopaʻa.
   • Hoʻoponopono i ke kaomi jet ma muli o ka grammage: 50– 100 bar (30–60gsm), 100–150 bar (60–100gsm), 150–200 bar (100–150gsm).
   • E hoʻohana i nā poʻo jet he nui (3–5) e hōʻoia i ka hoʻopili like ʻana ma ka pūnaewele.
4. Hoʻoheheʻe wai:
   • E hoʻoheheʻe i ka lole maʻemaʻe ma o nā ʻōwili pepa e wehe i ka wai nui (ua hoʻemi ʻia ka mākū i 30-40%).
5. Hoʻomaloʻo:
   • E hānai i ka lole i loko o kahi mea maloʻo ea (120–140°C) e ho'ēmi i ka makū i ka ≤5%. ʻO ka hoʻomaloʻo ʻana i ka ea e mālama i ka palupalu o ka lole (vs. hoʻomaloʻo pahu, hiki ke hoʻopaʻakikī i nā fiber).
6. Hoomaemae Hoomaemae:
   • E noi i kahi mea hoʻomaʻemaʻe silicone (1–2% ka hoʻopaʻa ʻana) ma ka padding e hoʻonui i ka manaʻo lima. E ho'ōla i ka 100-120 ° C e hōʻoia i ka paʻa ʻana o ka mea palupalu i nā fiber (ʻaʻohe holoi).
7. Lapaʻau Antibacterial/Disinfectant (Koho):
   • No nā noi lapaʻau / mālama home, hoʻohana i ka lāʻau antibacterial ion kālā (1–3%) a i ʻole nā ​​mea hoʻopau hoʻopau i ka disinfectant (kū'ē i ka waiʻona isopropyl). Hoʻōla ma 110°C.
8. ʻoki ʻana & Ka makani:
   • E ʻoki i ka lole i ka laulā maʻamau (100–220cm) ka hoʻohana ʻana i nā slitters rotary me nā alakaʻi laser (hoʻomanawanui: ±1cm).
   • E makani ma luna o nā kiko pepa 76mm e hana i nā ʻōwili o 100–300m ka lōʻihi (ma muli o ka grammage: 300m no 30gsm; 100m no 150gsm).
9. Ka Mana Mana:
   • E ho'āʻo i kēlā me kēia ʻōwili no ka grammag (ASTM D3776), hoʻopaʻa ʻana (AATCC 79), a me ka palupalu (KES-F).
   • No nā māka lāʻau lapaʻau, hoʻāʻo no ka ʻike lint (ISO 15797) a me ka biocompatibility (ISO 10993).

5. Wahi noi: WINIW Non Woven Microfiber Fabric - B2B Solutions by Industry

WINIW's Non Woven Microfiber Fabric—kuʻi ʻia ka nila a spunlace—hiki iā ia 8+ nā ʻoihana, me kēlā me kēia ʻano like ʻole i hoʻohālikelike ʻia i nā pono noi kikoʻī. Aia ma lalo ka wehewehe kikoʻī o nā hihia hoʻohana koʻikoʻi, nā kikoʻī i manaʻo ʻia, a me nā pōmaikaʻi o ka mea kūʻai aku.

5.1 Hoomaemae & Hoomaemae (Māhele Nui loa: 35% o ke kuai ana)

ʻO ka hoʻomaʻemaʻe a me ka hoʻomaʻemaʻe ka mākeke nui loa no kā mākou mau lole microfiber non woven, leveraging absorbency (spunlace) a me ka lōʻihi (kui kui):

• Holoi Hale (Spunlace):
  • Manaʻo ʻia: 30–60 gsm, 100–160cm laula, 0.1–0.4mm mānoanoa, palupalu loa (Papa 5), absorbency ≥600%, OEKO-TEX® Papa I. Ka lāʻau antibacterial koho.
  • Hoʻohana: Nā holoi kīhini (ʻaila ʻaila/wai), holoi holoi lole (ka wehe ʻana i ka poʻi), holoi lole lako (paʻa lepo). Kāohi ka hoʻolālā lint-free i ke koena ma luna o nā ʻili.
  • Laʻana B2B: Ke hoʻohana nei kahi brand FMCG Kina i ka lole spunlace 50gsm a WINIW no nā holoi kīhini "Eco-Clean".. ʻO nā holoi ' 700% hoʻemi ʻia ka hoʻohana ʻana o ka pepa e ka absorbency 30%, a hiki aku ke kuai 100 miliona ʻeke / makahiki ma Asia Hema.
• Na Papa Hoomaemae Hana (Kuʻi ʻia ʻo Needle):
  • Manaʻo ʻia: 300–600 gsm, 137knm laula, 1.0–1.5mm mānoanoa, ikaika tensile ≥250 N/5cm, pale kemika (10% nā ʻakika/alkali). ʻO ka lāʻau pale UV koho.
  • Hoʻohana: Holoi papahele hale hale hana, mīkini hoʻomaʻemaʻe, hoʻomaʻemaʻe kiʻekiʻe. ʻAʻole hiki ke kūpaʻa i ka holoi ʻana me nā pulupulu ʻoihana.
  • Laʻana B2B: Ke hoʻohana nei kahi hale hana kaʻa Kelemania i ka 400gsm needle pads WINIW e hoʻomaʻemaʻe i nā laina hui.. ʻOi aku ka lōʻihi o nā pads ma mua o nā pā pulupulu, e ho'ēmi ana i nā koina ʻōpala a me ka hoʻomaʻemaʻe ʻana i $200,000/makahiki.
• Lapaau Lapaau (Spunlace):
  • Manaʻo ʻia: 40–80 gsm, 160knm laula, 0.2–0.5mm mānoanoa, FDA 21 CFR 177.1520, CE EN 13795, absorbency ≥700%, lint-free. ʻAiʻiliʻili (iona kala) lapaʻau.
  • Hoʻohana: Hoʻomaʻemaʻe i ka ʻili ma mua o ka injection, mea holoi holoi, hoʻomaʻemaʻe hoʻomanawanui. Biocompatible a kū'ē i nā disinfectants (isopropyl alcohol).
  • Laʻana B2B: Hoʻohana ka mea hoʻolako lāʻau Vietnamese i ka lole spunlace 60gsm a WINIW no nā holoi holoi. Kūlike nā holoi holoi i nā kūlana EU CE, hiki ke hoʻokuʻu aku i 20+ ʻO nā halemai ʻEulopa a loaʻa he $5M i ka loaʻa kālā makahiki.

5.2 Kaʻa kaʻa (20% o ke kuai ana)

Ke hilinaʻi nei nā mea kūʻai kaʻa i nā ʻano like ʻelua no ka hōʻoluʻolu o loko, kānana, a me ka hoʻomaʻemaʻe:

• Na Lole Hoomaemae Kalaiaina (Spunlace):
  • Manaʻo ʻia: 80–120 gsm, 160knm laula, 0.4–0.6mm mānoanoa, palupalu loa (Papa 4), lint-free, absorbency ≥650%. ʻO ka lāʻau anti-static koho.
  • Hoʻohana: Hoʻomaʻemaʻe dashboards, nā noho ʻili, a me nā pale (ʻūlū ʻole). ʻO ka lāʻau anti-static e pale i ka hoʻopili hou ʻana o ka lepo.
  • Laʻana B2B: ʻO kahi hōʻailona kaʻa kaʻa US me nā lole spunlace 100gsm o WINIW me nā kaʻa hou.. Ua hoʻonui ʻia ka ʻoluʻolu o ka mea kūʻai aku no ka "ʻano o loko". 18% due to the cloths’ effectiveness and softness.
• Ea & Oil Filters (Kuʻi ʻia ʻo Needle):
  • Manaʻo ʻia: 200–400 gsm, 137knm laula, 0.8–1.2mm thickness, porosity ≥70%, air permeability ≥80 L/m²/s, pale kemika (oil/solvents).
  • Hoʻohana: Engine air filters (traps dust/particles) a me nā kānana aila (removes contaminants). Kūleʻa wela kiʻekiʻe (-40°C to +120°C).
  • Laʻana B2B: A Chinese automotive filter manufacturer uses WINIW’s 300gsm needle punched fabric for Toyota Corolla air filters. The fabric’s filtration efficiency (95% for 5μm particles) meets Toyota’s standards, earning a 3-year contract (500 tona/makahiki).
• Hoʻopaʻa leo (Kuʻi ʻia ʻo Needle):
  • Manaʻo ʻia: 600–800 gsm, 137knm laula, 1.5–1.8mm thickness, bulked structure, sound absorption coefficient ≥0.4 (1000Hz).
  • Hoʻohana: Pane puka, moena papahele, and trunk liners—reduces road and engine noise in cabins.
  • Laʻana B2B: A Korean automaker uses WINIW’s 700gsm needle punched fabric for electric vehicle (EV) hoʻokuʻu kani. The fabric reduced cabin noise by 4 dB, addressing EV drivers’ complaints about “road noise amplification.”

5.3 Lapaau & Papahana mālama ola kino (18% o ke kuai ana)

Ua lanakila ka lole Spunlace i nā noi lapaʻau ma muli o kona palupalu a me ka biocompatibility; hoʻohana ʻia ke kui kui no nā lako lāʻau paʻa:

• Kaʻaʻahu ʻEha (Spunlace):
  • Manaʻo ʻia: 50–80 gsm, 100–160cm laula, 0.3–0.5mm mānoanoa, palupalu loa (Papa 5), absorbency ≥750%, FDA 21 CFR 177.1520, ISO 10993 (biocompatible). Ka lāʻau antibacterial.
  • Hoʻohana: Pākuʻi ʻeha lua (uhi i ka gauze mua) e komo i ka exudate a pale i nā ʻeha. Hoʻemi ka ʻano palupalu i ka ʻehaʻeha o ka maʻi.
  • Laʻana B2B: Ke hoʻohana nei kahi hui lāʻau Kelemania i ka lole spunlace 60gsm o WINIW no nā ʻaʻahu ʻeha.. ʻO ka hoʻopaʻa ʻana o ka lole a me ka biocompatibility i hōʻemi i ka heluhelu ʻana o ka mea maʻi no nā maʻi ʻeha e 25%.
• Na Aahu Lapaau Hoolele (Spunlace):
  • Manaʻo ʻia: 70–100 gsm, 200knm laula, 0.4–0.7mm mānoanoa, māmā, hanu (ka hikiwawe o ka ea ≥50 L/m²/s), pale wai (AATCC 42 pae 3). CE EN 13795.
  • Hoʻohana: ʻO nā ʻaʻahu pale no nā limahana mālama ola kino - pale i nā wai o ke kino me ka hanu.
  • Laʻana B2B: Hoʻohana ka mea hoʻolako lāʻau lapaʻau Kina i ka lole spunlace 80gsm o WINIW no nā ʻaʻahu hoʻopau.. Kūlike nā ʻaʻahu i nā kūlana EU PPE, hiki ke hoʻokuʻu aku i 30+ nā ʻāina i ka wā maʻi maʻi a loaʻa ka loaʻa kālā he $20M.
• Uhi Lako Lapaau (Kuʻi ʻia ʻo Needle):
  • Manaʻo ʻia: 400–600 gsm, 137knm laula, 1.2–1.5mm mānoanoa, kaha waimaka ≥50 N, pale kemika (nā disinfectants). Hoʻopaʻa hoʻopaʻa ʻana i ka lapalapa ahi.
  • Hoʻohana: Nā uhi no nā moena o ka haukapila, nā noho huila, a me nā mīkini lapaʻau—pale i ka lepo, stains, a komo.
  • Laʻana B2B: Ke hoʻohana nei kahi kaulahao hoʻolako halemai ʻAmelika i nā uhi kuʻi 500gsm o WINIW no nā noho huila.. ʻO nā uhi hope loa 6 mahina (vs. 2 mahina no ka uhi pulupulu), e hoemi ana i na koina pani e $150,000/makahiki.

5.4 Mea lole Home (15% o ke kuai ana)

Hoʻohana nā mea kūʻai lole home i nā ʻano ʻelua no ka palupalu, hoʻopaʻa ʻana, a me ka lōʻihi:

• Kāwele Microfiber (Spunlace):
  • Manaʻo ʻia: 100–150 gsm, 160–220cm laula, 0.6–0.8mm mānoanoa, palupalu loa (Papa 4), absorbency ≥800%, maloo wikiwiki (2–3 hola maloʻo ea). Nā waihoʻoluʻu maʻamau.
  • Hoʻohana: Kāwele ʻauʻau, kāwele kahakai, a me nā kāwele kīhini—ʻoi aku ka wikiwiki o ka hoʻomoʻa ʻana i ka wai ma mua o ka pulupulu a maloʻo koke i mea e pale ai i ka maʻi maʻi.
  • Laʻana B2B: Ke hoʻohana nei kahi brand textile home Turkish i ka lole spunlace 120gsm o WINIW no nā kāwele kahakai "Quick-Dry". Ua lilo nā kāwele i mea kūʻai maikaʻi loa ma ʻEulopa, me ke kuai mahuahua ana e 40% ma muli o ko lākou māmā a maloʻo wikiwiki.
• Nā Uluna & Laina moe (Spunlace):
  • Manaʻo ʻia: 80–120 gsm, 200–220cm laula, 0.4–0.6mm mānoanoa, palupalu loa (Papa 5), hypoallergenic, OEKO-TEX® Papa I. ʻO ka mālama ʻana i ka moisture-wicking koho.
  • Hoʻohana: ʻO nā ʻili uluna nani a me nā laina moe—ʻoluʻolu ma ka ʻili, hypoallergenic (kūpono no nā maʻi allergy), a kū i nā mites lepo.
  • Laʻana B2B: Ke hoʻohana nei kahi moena moe momona ʻAmelika i ka lole spunlace 100gsm o WINIW no nā pahu uluna "Silk-Touch".. Loaʻa ka huahana 4.8/5 nā hōkū mai nā mea kūʻai mai, ʻO ka mea i hoʻomaikaʻi i kona manaʻo "pahu momona" a me nā pono hypoallergenic.
• Moe Pii & Moena (Kuʻi ʻia ʻo Needle):
  • Manaʻo ʻia: 300–500 gsm, 137knm laula, 1.0–1.5mm mānoanoa, lōʻihi (≥30,000 mau pōʻai Martindale), hoʻopaneʻe (≥500%), pale-pale. Ka lāʻau antibacterial koho.
  • Hoʻohana: Moena holoholona, nā laina pahu, a me ka moena hānai—hoʻomoʻa i ka mimi holoholona a me nā kahe, pale i ka haehae ʻana mai ka ʻuʻuku ʻana.
  • Laʻana B2B: Ke hoʻohana nei kahi hōʻailona huahana puaʻa US i ka lole 400gsm o WINIW no nā moena ʻīlio.. ʻO ka lōʻihi o nā moena a me ka hoʻopili ʻana i hoʻemi ʻia ka hoʻi mai o ka mea kūʻai aku e 60%, a ua hoʻonui ka brand i 500+ hale kūʻai holoholona.

5.5 ʻOihana & Nā noi ʻē aʻe (12% o ke kuai ana)

Hāʻawi nā ʻano ʻelua i nā pono ʻoihana kūikawā:

• Hoomaemae Electronics (Spunlace):
  • Manaʻo ʻia: 30–50 gsm, 100knm laula, 0.1–0.3mm mānoanoa, palupalu loa (Papa 5), lint-free, anti-static (pale ʻili ≤10⁸ Ω). FDA 21 CFR 177.1520 (meaʻai-pili no nā mea uila kīhini).
  • Hoʻohana: Hoʻomaʻemaʻe i nā papa kaapuni, pale kamepiula, a me nā leka pahupaʻikiʻi—pale i ka hoʻokuʻu ʻana i ka electrostatic (ESD) poino a me ke koena.
  • Laʻana B2B: Hoʻohana ka mea hana uila Kepani i nā lole spunlace 40gsm o WINIW e hoʻomaʻemaʻe i nā pale kelepona i ka wā o ka hana.. Ua hōʻemi nā lole i nā hemahema pale e 35%, mālama i $1M/makahiki i nā koina hana hou.
• Media kānana (Kuʻi ʻia ʻo Needle):
  • Manaʻo ʻia: 200–600 gsm, 137knm laula, 0.8–1.8mm thickness, porosity ≥65%, paʻa ʻāpana (5-50μm), pale kemika (nā ʻakika/alkalis/nā mea hoʻoheheʻe).
  • Hoʻohana: ʻOihana ʻohi lepo, nā kānana hoʻomaʻemaʻe wai, a me nā kānana hale lole pena—pahele i nā mea haumia me ka ʻole o ka hoʻokahe ʻana.
  • Laʻana B2B: Ke hoʻohana nei kahi mea kanu hoʻomaʻemaʻe wai ʻino Kina i ka lole 300gsm o WINIW no ka mea kānana. ʻO ka lōʻihi o ka lole i hoʻonui i ke ola kānana mai 2 pule i 1 mahina, e hōʻemi ana i nā kumukūʻai mālama e $80,000 / makahiki.
• Na uhi mahiai (Kuʻi ʻia ʻo Needle):
  • Manaʻo ʻia: 400–800 gsm, 137knm laula, 1.2–2.0mm mānoanoa, Palena UV (≥80% paʻa tensile ma hope o 2000h), wai-permeable (≥50 L/m²/s). ʻO ka lāʻau anti-fungal koho.
  • Hoʻohana: Nā uhi ʻai (pale i ka hau/insects) a me nā moena hānai (paʻa ka makū ʻoiai e ʻae ana i ka holo ʻana o ka ea).
  • Laʻana B2B: Hoʻohana ka mea hoʻolako mahiʻai ʻo Brazil i nā uhi kuʻi 600gsm o WINIW no nā mea kanu strawberry.. Ua hoʻonui nā uhi i ka hua e 20% (pale hau) a hoemi i ka hoohana pesticide e 30% (ʻākeʻe pepeke).

6. No ke aha e koho ai iā WINIW ma ke ʻano he mea hoʻolako lole microfiber non woven

Ma ke ʻano he alakaʻi alakaʻi ma Kina o ka lole microfiber non woven, Hāʻawi ʻo WINIW i nā mea kūʻai aku B2B i nā pono kūʻokoʻa e kākoʻo ana i kā lākou hana, maikaʻi, a me nā pahuhopu waiwai. Aia ma lalo nā kumu nui 350+ hilinaʻi nā ʻoihana honua iā mākou ma ke ʻano he hoa lōʻihi.

6.1 Kapa Hana Hana ʻelua-ʻenehana (15,000 Tona/makahiki)

ʻO kā mākou 14 laina laʻa (8 no ka kui kui, 6 no ka spunlace) hāʻawi i ka mana makahiki o 15,000 tona— lawa e halawai ai:

• ʻO nā mea kūʻai aku B2B liʻiliʻi: 1–5 tona mau kauoha laʻana (no ka hoʻomohala huahana) me 7-10 mau lā alakaʻi manawa (spunlace) a i ʻole 10-15 mau lā alakaʻi manawa (kui kui).
• Nā mea kūʻai aku waena: 50–200 tona mau kauoha i ka hapaha (no ka mahele ʻāina) me nā kumu kūʻai paʻa a me nā papa hoʻouna.
• Nā Mea Kūʻai Nui: 500+ mau aelike makahiki (no nā hōʻailona multinational) me ka lawe ʻana i kēlā me kēia mahina (Kākoʻo JIT) a me nā luna moʻokāki i hoʻolaʻa ʻia.

Mālama mākou 300 nā tona o ka waihona palekana no nā kikoʻī kaulana (e.g., 50gsm spunlace no ka holoi ʻana, 300kuʻi gsm no nā kānana) e kākoʻo i nā kauoha wikiwiki (3-5 lā lawe ʻana) no nā mea kūʻai B2B me nā lā palena paʻa.

6.2 Ka Mana Ko'iko'i & Nā palapala hōʻoia honua

ʻAʻole hiki ke kūkākūkā ʻia ka maikaʻi no nā mea kūʻai aku B2B - hoʻokō mākou i kahi ʻōnaehana QC 4-layer:

• Mea Kiko QC: 100% ka hoao ana o PET/PA6 microfibers (maikaʻi, paʻa paʻa, ka maemae) ma mua o ka hana ʻana. Ka helu hōʻole no nā mea maka: ≤0.5%.
• I-Line QC: Ka nānā ʻana i ka grammage i ka manawa maoli (kēlā me kēia 10 mika), mānoanoa (kēlā me kēia 20 mika), a me ka ikaika (kēlā me kēia 50 mika) i ka wā hana. Hoʻomaka nā ʻōnaehana ʻakomi i nā makaʻala no nā haʻalele.
• Hoʻāʻo pūʻulu: ʻO kēlā me kēia pūʻulu hana (10–20 ʻōwili) e hoʻāʻo kino ana i kā mākou lab ISO 17025-certified:
  • Kuʻi ʻia ka nila: Ka ikaika tensile (ASTM D882), pale kemika (ISO 175), UV pale (ISO 4892-2).
  • Spunlace: Ka hoʻopaʻa ʻana (AATCC 79), palupalu (KES-F), maʻiʻo lint (ISO 15797).
• Hooia o ka aoao ekolu: Hōʻoia nā loiloi makahiki e SGS/Intertek i ka hoʻokō ʻana i nā palapala hōʻoia:
  • ISO 9001: Pūnaehana hoʻokele maikaʻi.
  • OEKO-TEX® Kūlana 100 (Papa I–II): Palekana ʻili.
  • FDA 21 CFR 177.1520: Palekana pili meaʻai (spunlace).
  • CE EN 13795: ʻO ka mālama ʻana i nā mea lapaʻau (spunlace).

Hāʻawi mākou i nā hōʻike hoʻāʻo piha no kēlā me kēia kauoha-koʻikoʻi no nā mea kūʻai aku B2B e hoʻokō i nā koi hoʻoponopono (e.g., HIKI AU, US FDA) a me nā kūlana kūlana mea kūʻai aku.

6.3 ʻO ka ʻike pilikino no nā pono B2B

Hoʻomaopopo mākou he mau koi kūikawā ko nā mea kūʻai aku B2B-ʻo kā mākou hui o 10 ʻenekinia lole lole (me 8+ makahiki o ka ʻike microfiber) hāʻawi i ka hoʻoponopono ʻana i ka hopena:

• Hoʻopilikino Mea:
  • Lakiō hui: Hoʻoponopono i ka lakene PET/PA6 (60/40 i 90/10) e hoomua i ka ikaika (PET kiʻekiʻe) a i ʻole ke komo ʻana (kiʻekiʻe PA6).
  • ʻO ka maikaʻi o ka fiber: 0.1–0.8 dtex (ʻoi aku ka maikaʻi no ka palupalu, ʻoi aku ke koʻikoʻi no ka lōʻihi).
  • Nā ʻano like ʻole e pili ana i ka kaiaola: E hoʻohui i 5–10% ʻohe/ʻulu microfibers no ka hoʻopaʻa inoa ʻana.
• Hoʻopilikino Huahana:
  • Kuʻi ʻia ka nila: Kaumaha maʻamau (160–1000gsm), mānoanoa (0.5–2.0mm), a me nā lāʻau lapaʻau (mea kūʻokoʻa i ka antibacterial/UV).
  • Spunlace: laulā maʻamau (100–220cm), kaumaha (30–150gsm), a me nā lāʻau lapaʻau (moisture-wicking/anti-static).
• Hoʻopilikino Packaging:
  • Nui oloka: 50–300m (ma muli o nā pono laina hana o ka mea kūʻai aku).
  • Lepili: Nā hōʻailona maʻamau, helu pūʻulu, a me nā barcodes (no ka huli ʻana).
  • ʻO ka ʻiʻo paʻa: Nā ʻeke i hoʻopaʻa ʻia me ka EO sterilization (no ka spunlace lapaau).

Hāʻawi ʻia nā laʻana maʻamau i loko o 5-7 mau lā (spunlace) aiʻole 7-10 mau lā (kui kui)—ʻoi aku ka wikiwiki ma mua o nā mea hoʻokūkū (10–15 lā)- ka hoʻonui ʻana i kāu kaʻina hana hoʻomohala huahana.

6.4 Kumukūʻai B2B hoʻokūkū & ʻŌlelo ʻoluʻolu

Ma keʻano he mea hana pololei (ʻaʻohe kanaka waena), Hāʻawi mākou i ke kumu kūʻai pololei o ka hale hana ʻo 10-20% haʻahaʻa ma mua o nā hui kālepa. Nā pōmaikaʻi kumu kūʻai nui:

• Volume Hoemi:
  • 5% no nā kauoha ≥50 tons / makahiki.
  • 10% no nā kauoha ≥200 tons / makahiki.
  • 15% no nā kauoha ≥500 tons / makahiki.
• Nā ʻaelike lōʻihi: 12– 24 mahina ke kumu kūʻai paʻa (pale i nā mea kūʻai mai PET/PA6 ka piʻi ʻana o ke kumukūʻai— hiki ke piʻi i ka 15-25% i kēlā me kēia makahiki).
• Kumukūʻai Laʻana: Nā laʻana 1m × 1m manuahi (nā kikoʻī maʻamau); $50–$200 no nā laʻana maʻamau (hoihoi ʻia inā kau ʻoe i kahi kauoha ≥5 tons i loko 3 mahina).

Nā huaʻōlelo uku maʻalahi no nā mea kūʻai aku B2B:

• Nā mea kūʻai hou: T/T (30% mua, 70% kū'ē i ke kope B/L) a i ʻole L/C i ka ʻike.
• Hoʻokumu ʻia nā mea kūʻai aku (1+ makahiki): Wehe mooolelo (upena 30/60 lā) a i ʻole ka bila hōʻike mahina (no na kauoha nui).

6.5 ʻO ka Global B2B Logistics & Kākoʻo

Hoʻomaʻamaʻa mākou i nā kaulahao hoʻolako honua no nā mea kūʻai aku B2B me ka loiloi kūpono a me ke kākoʻo pane:

• Nā Hoa Logistics: Maersk, COSCO (ukana kai), DHL, FedEx (ukana ea) - hāʻawi i 55+ ʻāina:
  • ukana kai: 20-35 mau lā i EU / US; 7– 15 mau lā i Asia Hema; 30-45 mau lā i ʻApelika. FOB Xiamen/Shanghai a i ʻole CIF i kāu awa.
  • Ka ukana ea: 3-5 lā no nā kauoha wikiwiki (e.g., pūʻulu laʻana, hemahema laina hana).
• Dute: Hoʻomākaukau mākou i nā palapala hoʻopuka a pau (pepa pāʻoihana, papa helu hoʻopili, palapala kumu, hōʻike hōʻoia, hoʻolaha dute) e pale i ka lohi. No nā mea kūʻai EU, Hāʻawi mākou i nā helu EORI a me IOSS no ka hoʻokō VAT.
• Kākoʻo ma hope o ke kūʻai aku:
  • 24/7 lawelawe mea kūʻai aku ʻōlelo Pelekania (leka uila, kelepona, WhatsApp).
  • Hoʻololi i nā ʻōwili kīnā ʻole (hōʻoia ʻia e SGS) i loko 7 lā o ka loaʻa ʻana.
  • Kākoʻo ʻenehana ma ka pūnaewele (no nā kauoha ≥100 tons / makahiki): E kipa kā mākou mau ʻenekini i kāu hale hana e hoʻonui i ka hoʻohana lole i kāu laina hana (e.g., hoʻololi i nā hoʻonohonoho mīkini hoʻololi holoi).

7. Nā moʻolelo kūleʻa o ka mea kūʻai aku B2B: Pehea ʻo WINIW Non Woven Microfiber Fabric i hoʻololi i kā lākou ʻoihana

Aia ma lalo iho nā hiʻohiʻona maoli o ka hoʻoponopono ʻana o kā mākou lole microfiber non woven i nā pilikia o nā mea kūʻai aku B2B a hoʻoulu i ka ulu..

Nānā Hiʻohiʻona 1: Hoʻemi ʻo ʻAmelika Hui Pū ʻIa Hoʻomaʻemaʻe i nā kumukūʻai me ka lole i kuʻi ʻia

Mea kūʻai: He brand hoʻomaʻemaʻe ʻoihana US (loaʻa makahiki: $80M) ke kūʻai aku nei i nā pad scrub kaumaha no nā hale hana.
Paʻakikī: He 100-200 wale nō ka lōʻihi o kā lākou mau pulupulu poliester, e koi ana i ka pani pinepine. Ua hoʻopiʻi nā mea kūʻai aku i nā koina kiʻekiʻe, a ua lilo ka brand i ka mahele makeke i nā mea hoʻokūkū me nā huahana ʻoi aku ka lōʻihi.
Hoʻoholo: ʻO ka nila 400gsm o WINIW i kuʻi i ka lole microfiber i ulana ʻole ʻia (137knm laula, 1.2mm mānoanoa, ikaika tensile ≥250 N/5cm). ʻO ka lōʻihi o ka lole a me ka pale kemika (10% nā ʻakika/alkali) kūpono i nā pono ʻoihana.
Nā hualoaʻa:

• Ola Ola: Ua mau nā pads hou 500+ nā pōʻaiapuni (3x ka lōʻihi ma mua o ka pulupulu-polyester), e hoemi ana i na koina pani pani e 60%.
• Hoʻonui Kūʻai: Ua loaʻa hou ka brand 15% mahele makeke, a ua hoʻonui ʻia ka loaʻa kālā makahiki e 20% (mai $80M a i $96M).
• Hoʻopaʻa mea kūʻai: Ua piʻi ka nui o ka mālama ʻana o nā mea kūʻai mai 75% i 90% ma muli o nā manaʻo maikaʻi e pili ana i ka "waiwai mau loa" o nā pad.

Kuhikuhi: "ʻO ka lole i kuʻi ʻia ka nila a WINIW he mea hoʻololi pāʻani. ʻAʻole pono kā mākou mea kūʻai e pani i nā pad i kēlā me kēia pule, a ua loaʻa i kā mākou hui kūʻai aku kahi lanakila hoʻokūkū maopopo. Ua hoʻonui mākou i kā mākou laina huahana e hoʻokomo 6 nā ʻano like ʻole o ka microfiber pad—e hoʻohana ana i ka lole a WINIW. – Luna Nui, ʻAmelika Hui Pū ʻIa Hoʻomaʻemaʻe

Nānā Hiʻohiʻona 2: Hoʻonui ʻo European Baby Care Brand i ka māhele mākeke me Spunlace Wipes

Mea kūʻai: He brand mālama pēpē ʻEulopa (loaʻa makahiki: €50M) kūʻai aku i nā holoi holoi pēpē.
Paʻakikī: ʻO kā lākou polyester holoi i hoʻonāukiuki i ka ʻili 15% o na mea hoohana, alakaʻi i nā hoʻihoʻi kiʻekiʻe a me nā loiloi maikaʻi ʻole. Pono lākou i kahi ultra-soft, hypoallergenic koho e mālama i nā mea kūʻai aku a hoʻonui i ka māhele mākeke.
Hoʻoholo: ʻO WINIW's 50gsm spunlace non woven microfiber fabric (160knm laula, 0.3mm mānoanoa, OEKO-TEX® Papa I, Māhele palupalu loa 5, lāʻau antibacterial). ʻO ka palupalu o ka lole a me nā waiwai hypoallergenic i hoʻoponopono i nā pilikia hoʻonāukiuki.
Nā hualoaʻa:

• Hoemi Huhu: Ua hoʻokuʻu ʻia nā hoʻopiʻi ʻeha ʻili mai 15% i 2% i loko 6 mahina o ka hoʻomaka ʻana i nā holoi holoi hou.
• Mahuahua Makeke: Ua loaʻa ka brand 10% mahele makeke ma Europa, ke kūʻai aku nei i nā mea hoʻokūkū ma nā hale kūʻai nui (Carrefour, Tesco).
• Kumukuai Premium: Ua kūʻai ʻia nā holoi holoi 20% ʻoi aku ka kiʻekiʻe ma mua o nā polyester - ua makemake ka poʻe kūʻai aku e uku hou aku no nā pōmaikaʻi "ʻoluʻolu i ka ʻili pēpē".. Ua hoʻonui ʻia ka loaʻa kālā makahiki e 25% (mai €50M a i €62.5M).

Kuhikuhi: "Ua hoʻokō ka lole spunlace o WINIW i kā mākou mau kūlana koʻikoʻi no ka palekana o ka pēpē a me ka palupalu. Ua hāʻawi pū ka lāʻau antibacterial iā mākou i kahi kūʻai kūʻai kūʻokoʻa-makemake nā mākua i ka holoi ʻana i ka 'pale aku i nā germs' ʻoiai ke akahai.. Ke hoʻohana nei mākou i ka lole o WINIW no 100% o kā mākou laina holoi pēpē." - Luna Hoʻokele, Brand mālama pēpē ʻEulopa

Nānā Hiʻohiʻona 3: Ua lanakila ka mea hana kānana kaʻa Kina i ka ʻaelike Toyota

Mea kūʻai: He mea hana kānana kaʻa Kina (loaʻa makahiki: ¥200M) ka hāʻawi ʻana i nā kānana ea i nā mea hana kaʻa home.
Paʻakikī: Hāʻawi lākou i kahi ʻaelike e hāʻawi i nā kānana iā Toyota akā makemake lākou i kahi lole i kūpono i nā kūlana kānana koʻikoʻi o Toyota. (95% ka pono no ka 5μm particles) a me ka pale wela (-40°C to +120°C). ʻAʻole hiki i kā lākou lole polyester i kēia manawa nā hoʻāʻo.
Hoʻoholo: ʻO ka nila 300gsm o WINIW i kuʻi i ka lole microfiber ʻole i ulana ʻia (137knm laula, 1.0mm mānoanoa, pōʻalo 70%, hikiwawe ea 80 L/m²/s). ʻOi aku ka maikaʻi o ka kānana a me ka pale wela ma mua o nā koi o Toyota.
Nā hualoaʻa:

• Lanakila aelike: Ua lanakila ka mea hana i kahi ʻaelike 3 makahiki e hoʻolako 500 tona/makahiki o na kānana no ka Toyota Corolla—e hooulu ana i ¥50M i ka loaa makahiki (25% o ka huina loaa).
• ʻIke maikaʻi: Ua hoʻomaikaʻi ʻo Toyota i nā kānana "hana mau,” a ua kono ʻia ka mea hana e kūʻai aku i nā ʻaelike hou (Camry, RAV4).
• Hoʻonui honua: ʻO ka palapala hōʻoia Toyota i hiki ai i ka mea hana ke komo i nā mākeke kūʻai aku (Asia Hikina Hema, ʻAmelika Latina)—hoʻohui ¥30M i ka loaʻa kālā makahiki.

Kuhikuhi: "ʻO ka lole i kuʻi ʻia ka nila a WINIW ke kī i ka lanakila ʻana i ka hilinaʻi o Toyota. Ua hana pū kā lākou hui ʻenehana me mākou e hoʻāʻo i nā kikoʻī like ʻole a hiki i ko mākou hālāwai ʻana i nā kūlana kikoʻī o Toyota. Ua hoʻololi kēia ʻaelike i kā mākou ʻoihana mai kahi mea hoʻolako kūloko i kahi mea pāʻani honua. " – Luna Hoʻopuka, Mea Hana Hana Anana Kaʻa Pākē

8. Nīnau pinepine (FAQ) no nā mea kūʻai mai B2B

Ma lalo iho nei nā pane i nā nīnau maʻamau mai nā mea kūʻai mai B2B e noʻonoʻo ana i kā mākou lole microfiber ʻole i ulana ʻia.

Q1: Pehea au e koho ai ma waena o ka lole microfiber i ulana ʻole ʻia a me ka spunlace?

A1: E koho ma muli o nā pono kumu o kāu noi:

• Kuʻi ʻia ʻo Needle: Kūpono inā pono ʻoe ka lōʻihi, nui, a i ʻole ka ikaika kiʻekiʻe (e.g., nā papa hoʻomaʻemaʻe ʻoihana, nā kānana, hoʻokuʻu kani). ʻOi aku ka maikaʻi no ka hana kaumaha, hoʻohana pinepine ʻia.
• Spunlace: Kūpono inā pono ʻoe palupalu, kiʻekiʻe absorbency, a i ʻole ka hana lint-free (e.g., holoi pēpē, nā lole lapaʻau, lole lole home). ʻOi loa no ka pili ʻili, pololei, a i ʻole nā ​​mea hoʻohana maʻalahi a hoʻohana hou ʻia.

Hiki i kā mākou hui ʻenehana ke kālailai i kāu huahana hope, laina hana, a me ka mākeke makai e paipai i ke ʻano kūpono—no ka uku ʻole no nā nīnau B2B.

Q2: He aha ka helu kauoha liʻiliʻi (MOQ) no kēlā me kēia ʻano like ʻole?

A2: ʻOkoʻa nā MOQ ma nā ʻano like ʻole a me ka hana maʻamau:

• Kuʻi ʻia ʻo Needle: Nā kikoʻī maʻamau (160–1000gsm, 137knm laula): MOQ= 5 mau tona. Nā lapaʻau maʻamau (antibacterial/UV): MOQ= 10 mau tona.
• Spunlace: Nā kikoʻī maʻamau (30–150gsm, 160/200knm laula): MOQ= 3 mau tona. laulā maʻamau (100–220cm) a i ʻole nā ​​lāʻau lapaʻau: MOQ= 5 mau tona.

No ka ho'āʻo liʻiliʻi (hoʻomohala huahana), hāʻawi mākou i 1-2 ton "nā kauoha laʻana" ma kahi 10% uku uku (hoʻihoʻi ʻia inā kau ʻoe i kahi kauoha piha ≥5 tons i loko 3 mahina).

Q3: Hiki ke hoʻopilikino ʻia ka laulā o ka lole i kuʻi ʻia (ma mua o 137cm)?

A3: ʻAʻole—ua hana ʻia ka ʻano like ʻole i hoʻopaʻa ʻia me ka laulā 137cm paʻa, no ka mea, ua calibrated kā mākou mau laina kuʻi kui no kēia ana e hōʻoia i ka ikaika a me ka mānoanoa. Ua kūpono kēia laula 90% nā laina hana ʻoihana (e.g., hana kānana, hoʻomaʻemaʻe pad converting). Inā makemake ʻoe i kahi laula ʻokoʻa no ka lole kuʻi kui, hiki iā mākou ke ʻoki i ka ʻōwili 137cm i nā laula haiki (e.g., 68.5knm) me ka uku ole.

Q4: Ua kūpono kāu lole spunlace no nā noi pili meaʻai (e.g., holoi kīhini)?

A4: ʻAe — hui pū kā mākou lole spunlace non woven microfiber FDA 21 CFR 177.1520 (palekana pili meaʻai) i ka wā i hana ʻia ai me nā mea ʻai meaʻai a ʻaʻohe mea hoʻohui ʻino. He kūpono ia no nā holoi kīhini, hoʻomaʻemaʻe hale hana meaʻai, a me nā mea hoʻopili meaʻai. Hāʻawi mākou i ka palapala FDA no kēlā me kēia pūʻulu e hōʻoia i ka hoʻokō ʻana i nā lula palekana meaʻai US a me EU.

Q5: Pehea ka lōʻihi o ka lawe ʻana i kahi kauoha maʻamau (e.g., kala maʻamau no ka lole spunlace)?

A5: Nā manawa alakaʻi no nā kauoha maʻamau:

• Spunlace kala maʻamau: 10–15 lā (5 nā lā no ka hoʻohālikelike kala + 10 lā no ka hana ʻana).
• Spunlace Kuʻuna Laulā: 7– 10 lā (hana maʻamau + 2 nā lā no ka ʻoki ʻana).
• Lapaʻau maʻamau i kuʻi ʻia ke kui: 15– 20 lā (10 nā lā no ka hoʻomākaukau ʻana i ka lāʻau lapaʻau + 10 lā no ka hana ʻana).

Nā kauoha maʻamau wikiwiki (e.g., hemahema laina hana) hiki ke wikiwiki i 5-10 lā me ka 15% uku uku.

Q6: He aha ke ola o kāu lole microfiber i ulana ʻole ʻia? Pehea e mālama ʻia ai?

A6: ʻO ke ola mālama 2 makahiki no nā ʻano ʻelua ke mālama pono ʻia:

• Mahana: 15–30°C (pale i ka wela loa >40°C, ka mea e hoʻohaʻahaʻa i nā fibers; a i ʻole anu <0°C, ka mea e palupalu ai ka lole).
• Ka haʻahaʻa: 40–60% (ʻo ka haʻahaʻa kiʻekiʻe ke kumu o ka poʻi ma luna o ka ʻeke; ʻAʻohe hopena o ka haʻahaʻa haʻahaʻa i ka PET/PA6).
• Hoʻopili ʻia: E hoʻopaʻa i ke kiʻiʻoniʻoni PE kumu a me ka ʻeke i ulana ʻia a hoʻopaʻa ʻia a hoʻohana ʻia. Ke wehe ʻia, hoʻohana i ka ʻōwili i loko 1 mahina (no ka pale ʻana i ka lepo a me ka lawe ʻana i ka wai).
• Waihona: ʻAʻole ʻoi aku ka nui o nā ʻōwili paʻa 10 kiʻekiʻe e pale aku i ka haki ʻana; e mālama i kahi mamao o ka lā (Hoʻopau ka UV i nā kala a hoʻonāwaliwali i nā fiber) a me nā kemika (e.g., nā mea hoʻoheheʻe, ka mea i poino i ka PET/PA6).

9. Hoʻokaʻaʻike iā WINIW: ʻO kāu mea hoʻolako lole microfiber non woven hilinaʻi

Inā makemake ʻoe i kahi lole i hoʻopaʻa ʻia i ka nila no ka hoʻohana ʻana i ka ʻoihana a i ʻole kahi lole spunlace ultra-soft no nā noi pili ʻili., Hāʻawi ka WINIW's Non Woven Microfiber Fabric i ka maikaʻi, hoʻopilikino, a waiwai i kāu pono ʻoihana B2B. Hoʻokaʻaʻike mai iā mākou i kēia lā e noi i kahi ʻōlelo, laʻana, a i ʻole kūkākūkā ʻenehana.

ʻIkepili Hoʻokaʻaʻike

• Inoa Hui: WINIW Nonwoven Materials Co.Ltd.
• leka uila: [email protected]
• Kelepona: 0086-189-6568-7670
• Pūnaewele: www.panonwoven.com
• Heluhelu: 1-1-417 Xinjinghuating Luocheng Town Huian County Quanzhou City Fujian Province Kina

Pehea e hoʻomaka ai i kāu hui B2B

1. Hoʻouna i kahi nīnau B2B: E haʻi mai iā mākou i kāu ʻano like ʻole (kui kuʻi/spunlace), specs (kaumaha, mānoanoa, laula), hoʻopau noi, ka nui, a me ka makeke makaikai ma ke kelepona, leka uila, a i ʻole kā mākou palapala pūnaewele.
2. Loaʻa i kahi ʻōlelo kūʻai maʻamau & Manaʻo: Hāʻawi kā mākou hui kūʻai i kahi kikoʻī kikoʻī (kumukūʻai, nā uku ho'ēmi, ka manawa o waena o ka hoʻomaka a i ka wā pau) a me ka paipai ʻenehana i loko 24 hola.
3. Nā Laʻana Hoʻāʻo: E kauoha i nā laʻana maʻamau manuahi a i ʻole nā ​​laʻana maʻamau i uku ʻia e loiloi i ka hana ma kāu laina hana.
4. E hōʻoia i ke kauoha & Hoailona aelike: Hoʻopau i nā kikoʻī, ʻōlelo hoʻouna, a me ka uku; kau inoa i kahi aelike B2B (loaʻa nā hōʻoia maikaʻi, nā palapala hōʻoia, a me nā ʻōlelo huna).
5. Hana ʻia & Nānā maikaʻi: Hana mākou i kāu lole, hana pūʻulu hoʻokolohua, a hoʻouna iā ʻoe i ka hōʻike hōʻike no ka ʻae ʻia.
6. Hoʻouna & Mahope o ke kuai ana: Hoʻouna mākou i ke kauoha ma o kāu logistic makemake; hahai kā mākou hui e hōʻoia i ka ʻoluʻolu a hāʻawi i ke kākoʻo ʻenehana mau.

WINIW Nonwoven Materials Co., Ltd. - ʻO Kina ka mea hoʻolako B2B alakaʻi o ka lole Microfiber Non Woven. Ka lōʻihi, ʻoluʻolu, Waiwai - Hana ʻia no ka holomua o kāu ʻoihana.