Baetsi ba Lesela la Lesela la Microfiber e sa Lohoeng

Tlhaloso

Lesela le sa Lohiloeng la Microfiber | China Top Supplier & Moetsi – WINIW Nonwoven Materials Co.Ltd.

1. Tlhaloso ea Sehlahisoa: Lesela la WINIW Non Woven Microfiber - Tharollo ea Dual-Technology bakeng sa Likopo tse Ts'ebetso e Phahameng

E le moetapele China e thehiloeng mofani oa thepa le moetsi ea masela a tsoetseng pele a sa loheng, WINIW Nonwoven Materials Co., Ltd. e ipabola ka ho hlahisa premium Lesela le sa Lohiloeng la Microfiber- e fana ka mefuta e 'meli ea mantlha e etselitsoeng litlhoko tse fapaneng tsa indasteri: Nale E Hlatsoe Non Woven Microfiber Fabric le Lesela le Non Woven Microfiber. E etselitsoe bareki ba B2B ho hloekisa, tsa bongaka, koloi, masela a lapeng, le mafapha a indasteri, masela a rona a sa lohiloeng a microfiber a sebelisa likhoele tse ntle haholo (≤1.0 dtex) le tlhahiso e nepahetseng ho fana ka matla a holimo, durability, le bonolo—e sebetsang ho feta mekhoa e tloaelehileng e sa lohoeng (k'hothone, polyester) le likhoele tsa tlhaho maemong a batloang haholo.

Bohareng ba lihlahisoa tsa rona ke tlhaloso ea "microfiber": likhoele tse bophara ba 0.1–1.0 dtex (1/50 botenya ba moriri wa motho), ho etsa sebaka se seholo sa bokahodimo (3-5x ea likhoele tse tloaelehileng) bakeng sa ho boloka metsi a ntlafetseng, ho cheha ditshila, le matšeliso a tactile. Ka ho fana ka mahlale a mabeli a tlhahiso, re sebetsana le litlhoko tse ikhethang tsa bareki:

• Nale E Hlatsoe Non Woven Microfiber Fabric: Phapang e boima (160- 1000gsm) e entsoeng ka ho hohela li-microfiber tse nang le linale tse hlabang—e loketseng lisebelisoa tse hlokang matla a phahameng, bongata, le durability (mohlala, lisebelisoa tsa ho hloekisa indasteri, li-filters tsa likoloi).
• Lesela le Non Woven Microfiber: E bobebe, mofuta o bobebe haholo (30- lik'hilograma tse 150) e entsoeng ka li-microfiber tse nang le hydro-entangling tse nang le lijete tsa metsi tse nang le khatello e phahameng-tse etselitsoeng ho hokahana le letlalo le ts'ebeliso e nepahetseng. (mohlala, lihlakola tsa bongaka, lihlahisoa tsa tlhokomelo ea bana, masela a majabajaba a lapeng).

Ka matla a tlhahiso ea selemo le selemo ea 15,000 lithane (8,000 lithane bakeng sa nale e hlajoang; 7,000 lithane bakeng sa spunlace) ka nqane 14 mela e inehetseng, re khotsofatsa tlhoko ea lefats'e ea B2B-ho tsoa ho liodara tse nyane tsa tloaelo (bakeng sa ntlafatso ea lihlahisoa) ho fana ka bongata bo boholo (1,000+ lithane/selemo bakeng sa tlhoekiso ea lichaba tse ngata le mefuta ea bongaka). Masela a rona a khomarela litekanyetso tsa machaba (ISO 9001, OEKO-TEX® Standard 100, FDA 21 CFR 177.1520) me ba tshepiwe ke 350+ bareki ka 55+ linaha, ho kenyelletsa mabitso a etellang pele tlhokomelong ea lapeng (Procter & Bafani ba lichelete), lisebelisoa tsa bongaka (Johnson & Johnson balekane), le likoloi (Toyota tier-1 barekisi). Hore na o hloka lesela le matsutla-tsutla bakeng sa ho hloekisa ka thata-thata kapa thepa e bonolo bakeng sa letlalo le bonolo, Masela a sa lohiloeng a microfiber a WINIW a fana ka ts'ebetso e hlophisitsoeng e tšehelitsoeng ke marang-rang a sebetsang a China a tlhahiso le thepa..

2. Litlhaloso tsa Tekheniki: WINIW Non Woven Microfiber Fabric - Lintlha tse qaqileng

Lesela la WINIW's Non Woven Microfiber le hlalosoa ke litekanyetso tse nepahetseng tsa tekheniki, ka nale e hlabilweng e fapaneng e kgomarelang dintlha tse fanoeng (160- 1000gsm, 0.5-2.0mm botenya, 137cm bophara) le phapang ea spunlace e e tlatselletsang ka liparamente tse tsamaellanang le indasteri bakeng sa lits'ebetso tse bobebe.. Ka tlase ke karohano e felletseng ea mefuta e 'meli - e bohlokoa bakeng sa bareki ba B2B ho netefatsa hore e lumellana le mela ea tlhahiso ea bona le litlhoko tsa tšebeliso ea ho qetela..

Paramethara	Nale E Hlatsoe Non Woven Microfiber Fabric	Lesela le Non Woven Microfiber	Mokhoa oa Teko	Bohlokoa ba Indasteri
Theknoloji ea Tlhahiso	Ho phunya nale (ho kenyeletsoa ha fiber ea mochini ka linale tse hlabang)	Spunlace (ho kenella ka metsi ka lijete tsa metsi tse nang le khatello e phahameng)	Tlhahlobo ea Pono + Fiber Bonding Analysis	Nale e hlabiloe: E etsa bongata/durability; Spunlace: E theha bonolo / ho tšoana - e tsamaellana le litlhoko tsa ts'ebeliso (mosebetsi o boima vs. tshoaro ya letlalo).
Sebopeho sa Raw Material	80% PET (Polyethylene terephthalate) + 20% PA6 (Nylon 6) li-microfibers (0.3-0.8 dtex)	70% PET + 30% PA6 microfibers (0.1-0.5 dtex); Ho ikhethela 5–10% ea bamboo fiber bakeng sa mefuta e sa tšoaneng ea eco-friendly	FTIR Spectroscopy (ASTM D5594)	PET/PA6 motsoako o leka-lekanya matla (PET) le monyebe (PA6); likhoele tse boreleli ka har'a spunlace li ntlafatsa bonolo / ho monya.
Grammage (Boima ho ya ka Yuniti)	160- lik'hilograma tse 1000 (mekhahlelo e tloaelehileng: 160-300 gsm bakeng sa mosebetsi o mahareng; 300-600 gsm bakeng sa mosebetsi o boima; 600-1000 gsm bakeng sa indasteri)	30- lik'hilograma tse 150 (mekhahlelo e tloaelehileng: 30-60 gsm bakeng sa ho hlakola; 60-100 gsm bakeng sa bongaka; 100-150 gsm bakeng sa masela a lapeng)	Ho leka-lekanya (ASTM D3776)	Nale e hlabiloe: Gramage e phahameng = ho tšoarella ho phahameng (tšebeliso ea indasteri); Spunlace: Popopolelo e tlase = e bobebe/e phefumolohang (lihlakola/liner).
Botenya	0.5-2.0 limilimithara (160gsm: 0.5mm; 1000gsm: 2.0mm)	0.1–0.8 limilimithara (30gsm: 0.1mm; 150gsm: 0.8mm)	Digital Thickness Gauge (ASTM D1777)	Nale e hlabiloe: Botenya = bongata bo bongata (likhohlopo tsa ho tlhotla); Spunlace: Thinner = tenyetsehang (lihlakola/liaparo tsa bongaka).
Bophara	137 cm (tsitsitseng; mokoloho o tsoelang pele, bophara ba mantlha: 76mm)	100- 220 cm (customisable; maemo: 160cm, 200cm)	Digital Caliper (ASTM D3774)	Nale e hlabiloe: 137cm e lumellana le mela e tloaelehileng ea ts'ebetso ea indasteri; Spunlace: Wide mefuta e fapaneng ya lisutu hlakola ho sokoloha (nyane) ho ea lifemeng tsa masela (e kgolo).
Matla a tšepe (Tataiso ea Mochini/MD)	≥150 N/5cm (160gsm: 150N; 1000gsm: 400N)	≥50 N/5cm (30gsm: 50N; 150gsm: 120N)	Mochini oa Teko oa Universal (ASTM D882)	Nale e hlabiloe: Matla a phahameng a hana ho taboha (ho hohla indasteri); Spunlace: Matla a itekanetseng a tšoanela ho tšoara ka bonolo (hlakola).
Matla a Kgapha	≥30 N (160gsm: 30N; 1000gsm: 80N)	≥10 N (30gsm: 10N; 150gsm: 25N)	Elmendorf Tear Tear (ASTM D1004)	Nale e hlabiloe: E mamella tšebeliso e boima (mohlala, ho hohla fatshe); Spunlace: E hana ho taboha nakong ea ho paka/ts'ebeliso (mohlala, hlakola ho hula).
Absorbency (Metsi)	≥400% ea boima ba lesela (160gsm: 400%; 1000gsm: 600%)	≥600% ea boima ba lesela (30gsm: 600%; 150gsm: 800%)	Teko ea ho monya (AATCC 79)	Spunlace: Monyetla o phahameng (e loketseng bakeng sa ho phumula/melaka); Nale e hlabiloe: Monyetla o itekanetseng (e leka-lekaneng ka nako e telele).
Bonolo (Maikutlo a Letsoho)	Sehlopha sa 3–4 (1=e mahoashe, 5=bonolo haholo; Kawabata Evaluation System)	Sehlopha sa 4–5 (Bonolo haholo)	Kawabata Evaluation System (KES-F)	Spunlace: Bonolo bo feteletseng (letlalo la letlalo: masea a hlakolang/ bongaka); Nale e hlabiloe: Bonolo bo itekanetseng (indasteri/mosebetsi o boima).
Khanyetso ea Lik'hemik'hale	E hanyetsanang le 10% acid (H₂SO₄), 10% alkalis (NaOH), solvents (ethanol, oli ea diminerale)	E hanyetsanang le 5% acid, 5% alkalis, sebolaya ditwatsi (joala ea isopropyl)	Teko ea ho Nqoelisoa (ISO 175:2010)	Nale e hlabiloe: Khanyetso e phahameng (ho hloekisa indasteri ka lik'hemik'hale tse thata); Spunlace: Khanyetso e bonolo (lihloekisi tsa malapa/ tsa bongaka).
Setifikeiti	ISO 9001, OEKO-TEX® Standard 100 (Sehlopha sa II), FINYELLANG	ISO 9001, OEKO-TEX® Standard 100 (Sehlopha sa I), FDA 21 CFR 177.1520, CE (IN 13795 bakeng sa bongaka)	Teko ea Mokha oa Boraro (SGS/Intertek)	Spunlace: Sehlopha sa I (lesea- bolokehileng)/FDA (lijo-kopano); Nale e hlabiloe: Sehlopha sa II (tshebediso e akaretsang)/FINYELLANG (ho latela indasteri).

3. Likarolo tsa mantlha: Hobaneng ha WINIW Non Woven Microfiber Fabric e Feta Mekhoa e Meng

Lesela la WINIW's Non Woven Microfiber - ka bobeli le nale le hlabollotsoeng - le fana ka melemo e ikhethang e sebetsanang le lintlha tsa bohlokoa tsa mahlaba bakeng sa bareki ba B2B. (mohlala, boleng bo tlase, ho se monye hantle, boleng bo sa tsitsang) le ho feta mekhoa e tloaelehileng e sa lohoeng (k'hothone, polyester) le masela a microfiber a bahlolisani. Ka tlase ke likarolo tse hlahelletseng tsa mofuta o mong le o mong.

3.1 Nale E Hlatsoe Non Woven Microfiber Fabric: Ho tšoarella & Bongata bakeng sa Tšebeliso e Boima

Mofuta oa rona oa nale o entsoe bakeng sa ts'ebetso e phahameng, mesebetsi e boima-ho leveraging mechanical faeba entanglement ho bopa robust, lesela le leholo le nang le matla a ikhethang le bophelo bo bolelele:

• Tensile e phahameng & Matla a Kgapha: Ka matla a ho tsitsa ≥150 N/5cm (ho fihlela 400 N/5cm bakeng sa 1000gsm) le matla a ho tabola ≥30 N, lesela le mamella ho sebelisoa ka thata:
  • Lisebelisoa tsa ho hloekisa indasteri: E mamella 500+ lipotoloho tsa ho hohla (khahlano le. 100- Lipotoloho tse 200 tsa li-cotton pads) ntle le ho tabola.
  • Li-filters tsa likoloi: E boloka botšepehi ba sebopeho tlas'a phallo e phahameng ea moea (20–30 m/s) le ho fetoha ha mocheso (-40°C ho ea ho +80°C).

  Tšusumetso ea B2B: Lets'oao la Amerika la ho hloekisa indasteri le tlohile ho lipache tsa polyester tsa k'hothone ho ea ho WINIW's 600gsm nale e phunyeletsoeng ka lisebelisoa tsa microfiber. Nako ea bophelo ea lihlahisoa tsa bona e ile ea eketseha ka 300%, ho fokotsa litšenyehelo tsa ho nchafatsa bareki ka 60% le ho matlafatsa ho reka khafetsa ka 25%.

• Bongata bo Phahameng & Porosity: Ts'ebetso ea ho phunya nale e etsa sebopeho sa porous sa 3D (porosity ≥70%) e nang le botenya bo laoloang (0.5-2.0 limilimithara)-e loketseng bakeng sa:
  • Tlhophiso: Likaroloana tsa maraba (5-50μm) lihloeng tsa moea tsa likoloi le likoleke tsa lerōle tsa indasteri, ka moea o kenang ≥100 L/m²/s (e leka-lekanya katleho ea ho sefa le sekhahla sa phallo).
  • Ho koala molumo: E sebelisoa ka har'a liphanele tsa mamati a makoloi le meahong ea mochini oa indasteri - e nka 30-40% ea lerata. (1000-2000 Hz) ka lebaka la sebopeho sa fiber e ngata.

  Tšusumetso ea B2B: Morekisi oa likoloi oa China o sebelisitse lesela le phuntsoeng la nale la WINIW's 800gsm bakeng sa ho kenya liphanele tsa mamati.. Lesela le ile la fokotsa lerata la ka har'a ntlo ka 3 dB, ho ntlafatsa lintlha tsa khotsofalo ea bareki ba automaker ka 12%.

• Lik'hemik'hale & Khanyetso ea UV: The 80/20 PET/PA6 motsoako o hanyetsa 10% acid, 10% alkalis, le metsoako ea liindasteri-e loketseng:
  • Ho hloekisa semela sa lik'hemik'hale: Li-Wipes le li-pads tse sebetsanang le ho qhalana ho thehiloeng ho solvent ntle le ho senyeha.
  • Lisebelisoa tsa kantle: Litšitiso tsa lerōle tsa sebaka sa kaho tse bolokang matla ka mor'a 1,000 lihora tsa ho pepeseha ha UV (≥80% ho boloka tsitsipano, ISO 4892-2).
• Litšenyehelo bakeng sa Tšebeliso e Kholo: E tsitsitseng 137cm bophara le sebōpeho-puo se phahameng (160- 1000gsm) fokotsa litšila meleng ea ho sebetsa liindasteri (≤3% litšila vs. 8-12% e nang le masela a tloahelehileng ka bophara). Bakeng sa bareki ba B2B ba odara 500+ lithane/selemo, litheolelo tsa boleng li fokotsa litšenyehelo tsa yuniti ka 10-15%.

3.2 Lesela le Non Woven Microfiber: Bonolo & Absorbency bakeng sa Likopo tse nepahetseng

Mofuta oa rona oa spunlace o etselitsoe ho ikopanya le letlalo, nepahalo, le lits'ebetso tse monyehang haholo-ho sebelisa hydro-entanglement ho theha e bonolo haholo., lesela le se nang lesela le nang le mokelikeli o ikhethang:

• Ultra-Soft & Setsoalle sa Letlalo: Ka maemo a bonolo a Kawabata a 4–5 (Bonolo haholo) le bokahodimo bo se nang letlapa, lesela le loketse bakeng sa likopo tse hlokolosi:
  • Lihlapi tsa bana: OEKO-TEX® Sehlopha sa I se netefalitsoe (e bolokehileng bakeng sa letlalo le sa tsoa tsoaloa), ho se na khalefo e tlalehiloeng litekong tsa bareki (khahlano le. 15% ho teneha ka ho hlakola polyester).
  • Liaparo tsa bongaka: E bonolo ka maqeba le letlalo le boreleli, ho fokotsa bohloko ba mokuli nakong ea liphetoho tsa moaparo.
  • Ho hloekisa ka elektronike: Moralo o se nang Lint o thibela mesaletsa ea li-skrini le liboto tsa potoloho (bohlokoa bakeng sa tlhahiso ea theknoloji).

  Tšusumetso ea B2B: Lets'oao la Europe la tlhokomelo ea bana le sebelisitse WINIW's 50gsm spunlace microfiber bakeng sa ho hlakola bana.. Liphuputso tsa bareki li bontšitse a 40% phokotso ya ditletlebo tsa "tlalo ya letlalo"., mme sehlahisoa se fumanehile 10% karolo ea 'maraka ho tsoa ho bahlolisani.

• Absorbency e ikhethang: E monya 600-800% ea boima ba eona metsing (2-3x e phahame ho feta k'hothone le 1.5x e phahameng ho feta nale e phunyeletsoeng ka microfiber)- e phethahetseng bakeng sa:
  • Lisebelisoa tsa ntlo: E nosetsa lintho tse qhalaneng (kofi, oli) ka pase e le 'ngoe, ho fokotsa tšebeliso ea ho hlakola ka 30%.
  • Lisebelisoa tsa bongaka: Ka potlako e monya maro a 'mele le likokoana-hloko, ho ntlafatsa taolo ea tšoaetso lipetlele.
  • Lihlahisoa tsa tlhokomelo ea liphoofolo tse ruuoang lapeng: Melaetsa e monyang e notlelang mongobo, ho boloka liphoofolo tsa lapeng li omme le ho fokotsa monko.

  Tšusumetso ea B2B: Lets'oao la tlhokomelo ea lapeng la US le phatlalalitse "Ultra-Absorb" e hlakola ka ho sebelisa lesela la spunlace la WINIW's 60gsm.. Thekiso e ile ea eketseha ka 35% ho 6 likhoeli, e susumetsoang ke thoriso ea bareki bakeng sa bokhoni ba li-wipes ba ho "hloekisa ka maqephe a fokolang."

• Ho tšoana & Lint-Free: Ts'ebetso ea hydro-entanglement e theha kabo e tsitsitseng ea fiber (ha ho clumping) le bokaholimo bo se nang lint-ea bohlokoa bakeng sa:
  • Tlhahiso ea bongaka: E thibela tšilafalo ea fiber ka likamoreng tse hloekileng le maemong a ho buuoa (e kopana le ISO 14644-1 Sehlopha 8 litekanyetso).
  • Khatiso ea masela: E fana ka motheo o bonolo oa khatiso ea digital (meralo ea moetlo bakeng sa masela a lapeng joalo ka li-pillowcase).
• Customizable Width & Boima ba 'mele: Ka bophara ba 100-220cm (customisable) le sebōpeho-puo sa 30-150gsm, lesela le lumellana le mela e fapaneng ea tlhahiso:
  • Lisebelisoa tsa sebopeho se senyane (100cm bophara): E fokotsa litšila ka har'a mochini o fetolang oa ho hlakola.
  • Masela a lapeng a sebopeho se seholo (220cm bophara): E loketse liphahlo tsa bethe le likharetene, ho fokotsa palo ea seam (le tshenyo) ka 50%.

3.3 Melemo e Arohantsoeng ea Mefuta e 'meli

Ho feta likarolo tsa bona tse ikhethang, ka bobeli ba nale ba WINIW ba hlabiloe le ho phunya masela a sa lohiloeng a microfiber a fana ka melemo e arolelanoang e khahlang bareki bohle ba B2B.:

• 100% PET/PA6 Blend bakeng sa Ts'ebetso e Ntle: 70-80% PET + 20-30% PA6 motsoako o leka-lekanya ho tiea ha PET (matla/bokgale) le PA6's hydrophilicity (ho monyela)- e sebetsang hofeta 100% polyester (monyetla o tlase) le 100% nylon (matla a tlase) masela.
• Eco-Friendly & E tsitsitseng:
  • E ka sebelisoa hape: Likhoele tsa PET/PA6 li 100% recyclable/, ka litšila tsa ka morao ho tlhahiso tse nchafalitsoeng ho li-nonwovens tse ncha (ho fokotsa litšila tsa lithōle ka 80%).
  • E ka sebelisoa hape: Mefuta ena ka bobeli e ka hlatsuoa ka mochini (40°C potoloho e bonolo), e nang le nale e hlajoang e fapaneng e mamellang 50+ e hlatsoa (e loketseng bakeng sa lisebelisoa tsa ho hloekisa tse ka sebelisoang hape) le phapang ea spunlace e tšoarellang 10-15 e hlatsoa (e loketseng bakeng sa ho phumula hape).
  • Tlhahiso e Tlaase: Feme ea rona e sebelisa 25% matla a letsatsi le recycles 95% ea mokhoa oa metsi-ho fokotsa tlhahiso ea khabone ho 1.6 kg CO₂/kg lesela (khahlano le. 2.8 lik'hilograma CO₂/kg bakeng sa li-nonwovens tse tloaelehileng).
• Boleng bo Tletseng & Sehlopha-to-Batch Uniformity: Taolo ea boleng bo thata (teko ea thepa e tala, ho beha leihlo, tlhahlobo ea ho qetela ea batch) e netefatsa ≤± 3% phapang ea sebōpeho-puo, botenya, le matla-a bohlokoa bakeng sa bareki ba B2B ba nang le mela e ikemetseng ea tlhahiso (mohlala, hlakola phetoho, tlhahiso ea sefe) tse hlokang thepa e tsitsitseng.

4. Mokhoa oa Tlhahiso: Kamoo WINIW e Etsang Lesela le sa Lohoeng la Microfiber

Lesela la WINIW's Non Woven Microfiber le hlahisoa ka mefuta e 'meli e fapaneng, ts'ebetso e nepahetseng - ho phunya nalete le spunlace - e 'ngoe le e' ngoe e ntlafalitsoe ho theha thepa e ikhethang ea mefuta ea eona e fapaneng.. Ka tlase ke tlhaloso e qaqileng ea li-workflows ka bobeli, ho totobatsa mehato ea bohlokoa e netefatsang boleng le ts'ebetso.

4.1 Nale Punched Non Woven Microfiber Fabric Production Process

Mofuta o phuntsoeng oa nale o entsoe ka 8 mehato, ho tsepamisa maikutlo ho kenyelletsong ea faeba ea mochini ho aha matla le bongata:

1. Tokisetso ea Lintho tse tala:
   • Kopanya 80% PET microfibers (0.3-0.8 dtex, 38bolelele ba mm) le 20% PA6 microfibers (0.3-0.8 dtex, 32bolelele ba mm) ka blender ea lebelo le holimo (1,200 rpm) bakeng sa 30 metsotso ho etsa bonnete ba kabo e tšoanang.
   • Omisa likhoele tse tsoakiloeng ka har'a vacuum dryer (160°C bakeng sa PET, 80°C bakeng sa PA6) ho fokotsa mongobo ho ≤0.05% -ho thibela ho senyeha ha fiber nakong ea ts'ebetso.
2. Karete & Web Formation:
   • Fepa likhoele tse omisitsoeng mochining oa likarete o nang le lirolara tsa terata, e arolang le ho lekanya likhoele hore e be tšesaane, le tepo (botenya: 5-10 limilimithara, bophara: 137cm).
   • Kopanya tepo (lera ka dikgutlo tse 45°) ho matlafatsa matla mochining le litselaneng tse fapaneng - tse bohlokoa bakeng sa lits'ebetso tse boima.
3. Ho hlaba ka nale:
   • Fepa tepo e pharalletseng ka lesela la nale le nang le linale tse hlabang tse 15,000–20,000. (bophara: 0.5-0.8 limilimithara).
   • Fetola punch density (linale/cm²) e thehiloeng holim'a sebōpeho-puo: 20-40 linale / cm² (160- 300gsm), 40-60 linale / cm² (300- 600gsm), 60-80 linale / cm² (600- 1000gsm).
   • Linale li phunyeletsa tepong ka 800–1,200 strokes/ motsotso, ho koaela likhoele ho etsa momahano, lesela le leholo.
4. Tlhophiso ea Mocheso:
   • Fetisa lesela ka mochine oa stenter (160-180°C) ho beha sebopeho sa fiber-ho fokotsa shrinkage ho ≤3% (ASTM D1204) le ho matlafatsa botsitso ba dimensional.
5. Khalendara (Taba ea boikhethelo):
   • Bakeng sa lits'ebetso tse hlokang sebaka se boreleli (mohlala, lifela), fetisa lesela ka meqolo e futhumetseng ea calender (120-140°C) ho hatella bokahodimo ntle le ho fokotsa porosity.
6. Kalafo ea Lik'hemik'hale (Taba ea boikhethelo):
   • Sebelisa antibacterial (ion ea silevera) kapa liphekolo tse hanyetsanang le UV ka li-padding (sekhahla sa ho nka: 20-30%) bakeng sa lits'ebetso tsa indasteri / kantle. Phekola ka 120-150 ° C ho lokisa phekolo.
7. Slitting & Ho tsokotsa moea:
   • Arola lesela le tsoelang pele ho ea bophara bo tsitsitseng ba 137cm (ha ho customization) ho sebelisa li-blades tse nepahetseng.
   • Hlakola lesela holim'a li-cores tsa pampiri tse bophara ba 76mm ho etsa meqolo ea bolelele ba 50-200m. (e thehiloeng holim'a sebōpeho-puo: 200m bakeng sa 160gsm; 50m bakeng sa 1000gsm).
8. Taolo ea Boleng:
   • Lekola lethathamo le leng le le leng bakeng sa sebōpeho-puo (ASTM D3776), matla a tšepe (ASTM D882), le botenya (ASTM D1777).
   • Etsa tlhahlobo ea batch bakeng sa khanyetso ea lik'hemik'hale (ISO 175) le ho hanyetsa UV (ISO 4892-2) bakeng sa litaelo tsa indasteri.

4.2 Mokhoa oa Tlhahiso ea Lesela la Masela a Spunlace Non Woven Microfiber

Mofuta o fapaneng oa spunlace o etsoa ka hare 9 mehato, ho tsepamisa maikutlo ho hydro-entanglement ho bopa bonolo le ho tšoana:

1. Tokisetso ea Lintho tse tala:
   • Kopanya 70% PET microfibers (0.1-0.5 dtex, 32bolelele ba mm) le 30% PA6 microfibers (0.1-0.5 dtex, 28bolelele ba mm) ka blender (1,000 rpm) bakeng sa 25 metsotso. Bakeng sa mefuta e fapaneng ea eco-friendly, eketsa 5–10% ea bamboo microfibers.
   • Omisa motsoako ka har'a vacuum dryer (150°C bakeng sa PET, 70°C bakeng sa PA6) ho mongobo ≤0.03% -e bohlokoa bakeng sa ts'ebetso e ntle ea fiber.
2. Karete & Web Formation:
   • Fepa likhoele ka mochini o nepahetseng oa likarete (e nang le lirolara tse khabane) ho bopa e tshesane, tepo e ts'oanang (botenya: 2–5 limilimithara) ka mokhoa o sa reroang oa fiber-ho netefatsa bonolo le matla.
   • Theha tepo e tsoelang pele (bophara: 100- 220 cm, customisable) 'me u e fepe ka mochine oa spunlace.
3. Hydro-Entanglement (Spunlace):
   • Fetisa marang-rang ka letoto la lihlooho tsa jete tsa metsi tse nang le khatello e phahameng (khatello: 50- 200 bar). Lijete tsa metsi (bophara: 0.1-0.2 limilimithara) ho kenya likhoele ka ho li qobella ka har'a tepo-ho etsa lesela le momahaneng le se nang li tlamang.
   • Fetola khatello ea jete ho latela sebōpeho-puo: 50- 100 bar (30- 60gsm), 100- 150 bar (60- 100gsm), 150- 200 bar (100- lik'hilograma tse 150).
   • Sebelisa lihlooho tse ngata tsa jete (3–5) ho etsa bonnete ba ho ts'oaroa ka mokhoa o ts'oanang ho web.
4. Ho nosetsa:
   • Fetisa lesela le metsi ka har'a meqolo e hatelitsoeng ho tlosa metsi a mangata (mongobo o fokotsehile ho 30-40%).
5. Ho omisa:
   • Fepa lesela ka har'a mochini o omisang moea (120-140°C) ho fokotsa mongobo ho ≤5%. Ho omisa ka moea ho boloka bonolo ba lesela (khahlano le. ho omisa moqomo, e ka thatafatsang likhoele).
6. Ho nolofatsa Kalafo:
   • Kenya sesebelisoa se bonolo se thehiloeng ho silicone (1-2% ho tsepamisa mohopolo) ka padding ho ntlafatsa maikutlo a letsoho. Pheko ka 100-120 ° C ho netefatsa hore se bonolo se tlama likhoele (ho se hlatsoe).
7. Kalafo ea Antibacterial/Disinfectant (Taba ea boikhethelo):
   • Bakeng sa likopo tsa bongaka/ tsa lapeng, sebelisa silevera ion kalafo ea antibacterial (1-3%) kapa lipheletso tse tsamaellanang le sebolaea-mafu (e hanyetsanang le joala ba isopropyl). Pheha ka mocheso oa 110 ° C.
8. Slitting & Ho tsokotsa moea:
   • Seha lesela ho ea bophara bo tloaelehileng (100- 220 cm) ho sebelisa li-rotary slitters tse nang le litataiso tsa laser (mamello: ±1cm).
   • Phefola holim'a li-cores tsa pampiri tse 76mm ho etsa lirolo tsa bolelele ba 100-300m (e thehiloeng holim'a sebōpeho-puo: 300m bakeng sa 30gsm; 100m bakeng sa 150gsm).
9. Taolo ea Boleng:
   • Lekola lethathamo le leng le le leng bakeng sa sebōpeho-puo (ASTM D3776), ho monyela (AATCC 79), le bonolo (KES-F).
   • Bakeng sa limaraka tsa bongaka, teko bakeng sa dikahare tsa lint (ISO 15797) le biocompatibility (ISO 10993).

5. Libaka tsa Kopo: WINIW Non Woven Microfiber Fabric - B2B Solutions by Industry

Lesela la WINIW's Non Woven Microfiber—nale e hlajoang le ho ohloa—e thusa ho 8+ liindasteri, ka mofuta o mong le o mong o etselitsoeng litlhoko tse ikhethileng tsa ts'ebeliso. Ka tlase ke tlhaloso e qaqileng ea linyeoe tsa tšebeliso ea bohlokoa, lintlha tse khothalelitsoeng, le melemo ea bareki.

5.1 Ho hloekisa & Bohloeki (Karolo e Khōlō ka ho Fetisisa: 35% ea Thekiso)

Ho hloekisa le bohloeki ke 'maraka o moholo ka ho fetisisa oa masela a rona a sa lohoeng a microfiber, leveraging absorbency (spunlace) le durability (hlaba nalete):

• Melapo ea Ntlo (Spunlace):
  • Litlhaloso tse khothalelitsoeng: 30- lik'hilograma tse 60, 100-160cm bophara, 0.1- 0.4 limilimithara botenya, Bonolo haholo (Kereiti 5), monyebe ≥600%, Sehlopha sa OEKO-TEX® sa I. Ho ikhethela kalafo ea antibacterial.
  • Sebelisa: Lisebelisoa tsa kichine (ho monya oli/metsi), liaparo tsa ho hlapela (ho tlosa hlobo), lisebelisoa tsa thepa (ho cheha lerole). Moralo o se nang Lint o thibela masala holim'a bokaholimo.
  • B2B Mohlala: Letšoao la China la FMCG le sebelisa lesela la WINIW's 50gsm spunlace bakeng sa "Eco-Clean" e hlakola ka kichineng.. Litlhapi' 700% absorbency fokotswa tshebediso ya lakane ka 30%, mme thekiso e fihlile 100 lipakete tse limilione / selemo Asia Boroa-bochabela.
• Lisebelisoa tsa ho Hloekisa Liindasteri (Nale E hlabiloe):
  • Litlhaloso tse khothalelitsoeng: 300- lik'hilograma tse 600, 137cm bophara, 1.0-1.5 limilimithara botenya, matla a matla ≥250 N/5cm, khanyetso ea lik'hemik'hale (10% li-acids / alkalis). Kalafo ea boikhethelo e hanyetsanang le UV.
  • Sebelisa: Fektheri fatše ho hohla, ho hloekisa mochine, ho hloekisa ho qhalla ha lik'hemik'hale. E tšoarella ka ho lekana ho mamella ho hohloa ka borashe ba indasteri.
  • B2B Mohlala: Feme ea likoloi ea Jeremane e sebelisa lithakhisa tsa nale tsa WINIW tsa 400gsm ho hloekisa mehala ea kopano.. Li-pads li nka nako e telele ho 5x ho feta liphahlo tsa k'hothone, ho fokotsa litšenyehelo tsa litšila le ho hloekisa ka $ 200,000 / selemo.
• Litlhako tsa Bongaka (Spunlace):
  • Litlhaloso tse khothalelitsoeng: 40- lik'hilograma tse 80, 160cm bophara, 0.2- 0.5 mm botenya, FDA 21 CFR 177.1520, CE EN 13795, ho monya ≥700%, ntle le lesela. Antibacterial (ion ea silevera) phekolo.
  • Sebelisa: Ho hloekisa letlalo pele ho ente, ho phumula sesebelisoa sa ho buoa, bohloeki ba mokuli. Biocompatible ebile e hanana le li-disinfectants (joala ea isopropyl).
  • B2B Mohlala: Morekisi oa bongaka oa Vietnam o sebelisa lesela la WINIW's 60gsm spunlace bakeng sa ho hlakola. Li-wipes li kopana le litekanyetso tsa EU CE, ho nolofalletsa thomello ho 20+ Lipetlele tsa Europe le ho hlahisa $ 5M ka chelete ea selemo le selemo.

5.2 Tsa makoloi (20% ea Thekiso)

Bareki ba likoloi ba itšetlehile ka mefuta e 'meli bakeng sa boiketlo ba ka hare, tlhoekiso, le ho hloekisa:

• Masela a ho Hloekisa ka Hare-hare (Spunlace):
  • Litlhaloso tse khothalelitsoeng: 80- lik'hilograma tse 120, 160cm bophara, 0.4- 0.6 limilimithara botenya, Bonolo haholo (Kereiti 4), ntle le lesela, ho monya ≥650%. Kalafo ea khetho ea anti-static.
  • Sebelisa: Ho hloekisa li-dashboards, litulo tsa letlalo, le li-skrini (e se nang mokgoapo). Kalafo ea anti-static e thibela ho tsosolosoa ha lerōle.
  • B2B Mohlala: Letšoao la lisebelisoa tsa likoloi tsa Amerika le kenyelletsa masela a spunlace a WINIW's 100gsm a nang le likoloi tse ncha.. Khotsofalo ea bareki bakeng sa "boleng ba ka hare" e eketsehile ka 18% ka lebaka la katleho le bonolo ba masela.
• Moea & Lisefa tsa oli (Nale E hlabiloe):
  • Litlhaloso tse khothalelitsoeng: 200- lik'hilograma tse 400, 137cm bophara, 0.8-1.2 mm botenya, porosity ≥70%, ho kenella ha moea ≥80 L/m²/s, khanyetso ea lik'hemik'hale (oli/solvents).
  • Sebelisa: Lisebelisoa tsa moea tsa enjene (e ts’oara lerole/matsoanyane) le li-filters tsa oli (e tlosa ditshila). Ho hanyetsa mocheso o phahameng (-40°C ho ea ho +120°C).
  • B2B Mohlala: Moetsi oa mochini oa mochini oa likoloi oa China o sebelisa lesela le phunyeletsoeng la nale la WINIW's 300gsm bakeng sa lifilimi tsa moea tsa Toyota Corolla.. Matla a ho sefa ha lesela (95% bakeng sa likaroloana tsa 5μm) e kopana le maemo a Toyota, ho fumana konteraka ea lilemo tse 3 (500 lithane/selemo).
• Insulation ea molumo (Nale E hlabiloe):
  • Litlhaloso tse khothalelitsoeng: 600- lik'hilograma tse 800, 137cm bophara, 1.5-1.8mm botenya, sebopeho se seholo, molumo oa ho monya coefficient ≥0.4 (1000Hz).
  • Sebelisa: Liphanele tsa mamati, limmete tsa fatše, le li-trunk liner—e fokotsa lerata la litsela le enjene ka har’a liphaposi.
  • B2B Mohlala: Moetsi oa likoloi oa Korea o sebelisa lesela la nale la WINIW's 700gsm bakeng sa koloi ea motlakase. (EV) ho koala molumo. Lesela le ile la fokotsa lerata la khabin ka 4 dB, ho rarolla litletlebo tsa bakhanni ba EV mabapi le "ho phahamisa lerata la litsela."

5.3 Bongaka & Tlhokomelo ea bophelo (18% ea Thekiso)

Lesela la spunlace le laola lits'ebetso tsa bongaka ka lebaka la bonolo ba lona le biocompatibility; nalete e hlajoang e sebelisetsoa lisebelisoa tsa bongaka tse tšoarellang:

• Liaparo Tsa Maqeba (Spunlace):
  • Litlhaloso tse khothalelitsoeng: 50- lik'hilograma tse 80, 100-160cm bophara, 0.3- 0.5 mm botenya, Bonolo haholo (Kereiti 5), ho monya ≥750%, FDA 21 CFR 177.1520, ISO 10993 (biocompatible). Phekolo ea likokoana-hloko.
  • Sebelisa: Maqeba a bobeli a maqeba (e koahela gauze ea mantlha) ho monya exudate le ho tshireletsa maqeba. Sebopeho se bonolo se fokotsa bohloko ba mokuli.
  • B2B Mohlala: K'hamphani ea meriana ea Jeremane e sebelisa lesela la WINIW's 60gsm spunlace bakeng sa ho roala maqeba.. The dressing’ absorbency and biocompatibility li fokolitse ho bala bakuli bakeng sa tšoaetso ea maqeba ka 25%.
• Liaparo Tsa Bongaka tse Lahloang (Spunlace):
  • Litlhaloso tse khothalelitsoeng: 70- lik'hilograma tse 100, 200cm bophara, 0.4- 0.7 mm botenya, e bobebe, e phefumolohang (ho kenella ha moea ≥50 L/m²/s), e thibelang metsi (AATCC 42 Boemo 3). CE EN 13795.
  • Sebelisa: Liaparo tse sireletsang bakeng sa basebeletsi ba bophelo bo botle-li thibela maro a 'mele ha li ntse li hema.
  • B2B Mohlala: Morekisi oa lisebelisoa tsa bongaka tsa China o sebelisa lesela la WINIW's 80gsm spunlace bakeng sa mese e lahloang.. Likase li kopana le maemo a EU PPE, ho nolofalletsa thomello ho 30+ linaha nakong ea seoa le ho hlahisa $20M ka chelete.
• Likoahelo tsa Thepa ea Bongaka (Nale E hlabiloe):
  • Litlhaloso tse khothalelitsoeng: 400- lik'hilograma tse 600, 137cm bophara, 1.2-1.5 limilimithara botenya, matla a ho tabola ≥50 N, khanyetso ea lik'hemik'hale (sebolaya ditwatsi). Kalafo ea boikhethelo e thibelang mollo.
  • Sebelisa: Likoahelo tsa libethe tsa sepetlele, litulo tsa likooa, le mechine ea bongaka—e sireletsa lerōleng, litšila, le ho apara.
  • B2B Mohlala: Sepetlele sa phepelo ea sepetlele sa US se sebelisa sekoaelo sa nale sa WINIW's 500gsm bakeng sa litulo tsa likooa.. Likoahelo tsa ho qetela 6 likhoeli (khahlano le. 2 likhoeli bakeng sa likoahelo tsa k'hothone), ho fokotsa litšenyehelo tsa phetoho ka $ 150,000 / selemo.

5.4 Lisebelisoa tsa Lehae (15% ea Thekiso)

Bareki ba masela a lapeng ba sebelisa mefuta e 'meli bakeng sa bonolo, ho monyela, le durability:

• Lithaole tsa Microfiber (Spunlace):
  • Litlhaloso tse khothalelitsoeng: 100- lik'hilograma tse 150, 160-220 cm ka bophara, 0.6- 0.8 mm botenya, Bonolo haholo (Kereiti 4), ho monya ≥800%, ho omisa kapele (2-3 lihora tse omeletseng moeeng). Mebala / dipaterone tse tloahelehileng.
  • Sebelisa: Lithaole tsa ho hlapa, lithaole lebōpong, le lithaole tsa kichineng - li monya metsi ka potlako ho makhetlo a 2 ho feta k'hothone 'me li omella kapele ho thibela hlobo..
  • B2B Mohlala: Mofuta oa masela oa lapeng oa Turkey o sebelisa lesela la WINIW's 120gsm spunlace bakeng sa lithaole tsa lebopo tsa "Quick-Ome". Lithaole li ile tsa fetoha tse rekisoang haholo Europe, ka thekiso e ntseng e eketseha ka 40% ka lebaka la thepa ea bona e bobebe le e omisang kapele.
• Mesamo & Li-Liner tsa Libethe (Spunlace):
  • Litlhaloso tse khothalelitsoeng: 80- lik'hilograma tse 120, 200-220 cm ka bophara, 0.4- 0.6 limilimithara botenya, Bonolo haholo (Kereiti 5), hypoallergenic, Sehlopha sa OEKO-TEX® sa I. Kalafo ea boikhethelo ea mongobo.
  • Sebelisa: Li- pillowcase tse majabajaba le lilakana tsa libethe—tse bonolo letlalong, hypoallergenic (e loketseng batho ba nang le allergy), ebile e hanela likokoanyana tsa lerole.
  • B2B Mohlala: Mofuta oa libethe tsa mabothobotho oa Amerika o sebelisa lesela la WINIW's 100gsm spunlace bakeng sa mesamo ea "Silk-Touch". Sehlahisoa se amohetse 4.8/5 linaleli tse tsoang ho bareki, ea ileng a rorisa boikutlo ba eona ba "botoro bo bonolo" le melemo ea hypoallergenic.
• Libethe tsa liphoofolo tse ruuoang lapeng & Mats (Nale E hlabiloe):
  • Litlhaloso tse khothalelitsoeng: 300- lik'hilograma tse 500, 137cm bophara, 1.0-1.5 limilimithara botenya, e tšoarellang (≥30,000 lipotoloho tsa Martindale), monyetla (≥500%), e thibang matheba. Ho ikhethela kalafo ea antibacterial.
  • Sebelisa: Libethe tsa liphoofolo tse ruuoang lapeng, li-crate liners, le meseme—e monya moroto oa liphoofolo tse ruuoang lapeng le ho qhalla, e hanana le ho taboha ho tsoa ho ho ngoapa.
  • B2B Mohlala: Letšoao la sehlahisoa sa liphoofolo tse ruuoang lapeng la Amerika le sebelisa lesela la nale la WINIW's 400gsm bakeng sa libethe tsa lintja.. The libethe' durability le absorbency fokotsa ho khutlela moreki ka 60%, mme lebitso la atoloswa ho 500+ mabenkele a liphoofolo tsa lapeng.

5.5 Indasteri & Lisebelisoa tse ling (12% ea Thekiso)

Mefuta ena ka bobeli e sebeletsa litlhoko tse khethehileng tsa indasteri:

• Tlhoekiso ea Elektronike (Spunlace):
  • Litlhaloso tse khothalelitsoeng: 30-50 gm, 100cm bophara, 0.1- 0.3 mm botenya, Bonolo haholo (Kereiti 5), ntle le lesela, anti-static (ho hanyetsa holimo ≤10⁸ Ω). FDA 21 CFR 177.1520 (ho ikopanya le lijo bakeng sa lisebelisoa tsa elektroniki tsa kichineng).
  • Sebelisa: Ho hloekisa mapolanka a potoloho, li-skrini tsa khomphutha, le lilense tsa khamera-e thibela ho tsoa ha electrostatic (ESD) tshenyo le masalla.
  • B2B Mohlala: Moetsi oa lisebelisoa tsa elektroniki oa Japane o sebelisa masela a spunlace a WINIW's 40gsm ho hloekisa li-skrini tsa smartphone nakong ea tlhahiso.. Masela a ile a fokotsa liphoso tsa skrine ka 35%, ho boloka $ 1M / selemo ka litšenyehelo tsa ho tsosolosa.
• Mecha ea ho Filtration (Nale E hlabiloe):
  • Litlhaloso tse khothalelitsoeng: 200- lik'hilograma tse 600, 137cm bophara, 0.8-1.8mm botenya, porosity ≥65%, poloko ea karoloana (5-50μm), khanyetso ea lik'hemik'hale (li-acids/alkalis/solvents).
  • Sebelisa: Ba bokellang lerole la indasteri, li-filters tsa ho hloekisa metsi, le li-filters tsa pente - li tšoasa litšila ntle le ho thibela ho phalla.
  • B2B Mohlala: Setsi sa China se hloekisang metsi a litšila se sebelisa lesela la nale la WINIW's 300gsm bakeng sa mecha ea litaba.. Ho tšoarella ha lesela ho ile ha lelefatsa bophelo ba sefe ho tloha ho 2 libeke ho 1 khoeli, ho fokotsa litšenyehelo tsa tlhokomelo ka $ 80,000 / selemo.
• Likoahelo tsa Temo (Nale E hlabiloe):
  • Litlhaloso tse khothalelitsoeng: 400- lik'hilograma tse 800, 137cm bophara, 1.2-2.0mm botenya, e hanyetsanang le UV (≥80% ho boloka tsitsipano ka mor'a 2000h), e tshelehang ka metsi (≥50 L/m²/s). Kalafo ea khetho ea anti-fungal.
  • Sebelisa: Sekoahelo sa lijalo (e sireletsa kgahlanong le serame/dikokonyana) le meseme ea bana (se boloka mongobo ha se dumella moya ho phalla).
  • B2B Mohlala: Morekisi oa temo oa Brazil o sebelisa sekoaelo sa nale sa WINIW's 600gsm bakeng sa lijalo tsa fragola.. Likoahelo li ile tsa eketsa chai ka 20% (tshireletso ya serame) le ho fokotsa tšebeliso ea chefo e bolaeang likokoanyana ka 30% (tšitiso ea likokoanyana).

6. Hobaneng U Khetha WINIW joalo ka Mofani oa Hao oa Lesela la Microfiber ea Non Woven

E le moetsi ea etelletseng pele oa China oa lesela le sa lohiloeng la microfiber, WINIW e fa bareki ba B2B melemo e ikhethang e tšehetsang tlhahiso ea bona, boleng, le lipakane tsa phaello. Ka tlase ke mabaka a bohlokoa 350+ likhoebo tsa lefats'e li re tšepa re le balekane ba tsona ba nako e telele.

6.1 Bokhoni ba Tlhahiso ea Theknoloji e 'Meli (15,000 Lithane/Selemo)

Tsa rona 14 mela e inehetseng (8 bakeng sa nale, 6 bakeng sa spunlace) fana ka matla a selemo le selemo a 15,000 lithane-tse lekaneng ho kopana:

• Bareki ba Sehlopha se Senyenyane sa B2B: 1– 5 tonne sampole odara (bakeng sa ntlafatso ea lihlahisoa) ka makhetlo a 7-10 a ho etella pele (spunlace) kapa matsatsi a 10-15 a ho etella pele (hlaba nalete).
• Bareki ba Boemo bo Bohareng: 50- Lithane tse 200 tsa kotara ka kotara (bakeng sa kabo ea libaka) ka litheko tse tsitsitseng le linako tsa ho fana.
• Bareki ba Meholo e Meholo: 500+ lithane tsa likonteraka tsa selemo le selemo (bakeng sa lihlahisoa tsa machaba) ka thomello ea khoeli le khoeli (Tšehetso ea JIT) le batsamaisi ba li-account ba inehetseng.

Re baballa 300 lithane tsa setoko sa polokeho bakeng sa lintlha tse tsebahalang (mohlala, 50gsm spunlace bakeng sa ho hlakola, 300nalete ea gsm e hlajoang bakeng sa lihloela) ho tshehetsa ditaelo tse potlakileng (3- ho tsamaisoa ha matsatsi a 5) bakeng sa bareki ba B2B ba nang le linako tse thata tsa tlhahiso.

6.2 Taolo ea Boleng bo thata & Litifikeiti tsa Lefatše

Boleng bo ke ke ba buisanoa bakeng sa bareki ba B2B — re kenya tšebetsong sistimi ea 4-layer QC:

• Lintho tse tala QC: 100% tlhahlobo ea PET/PA6 microfibers (botle bo botle, ho tiea, bohloeki) pele ho tlhahiso. Hana sekhahla bakeng sa thepa e tala: ≤0.5%.
• Mohala oa QC: Tlhokomelo ea nako ea sebele ea sebōpeho-puo (mang le mang 10 limithara), botenya (mang le mang 20 limithara), le matla (mang le mang 50 limithara) nakong ya tlhahiso. Sistimi ea othomathike e hlahisa tlhokomeliso bakeng sa ho kheloha.
• Teko ea Batch: Sehlopha se seng le se seng sa tlhahiso (10- Meqolo e 20) e etsa liteko tsa 'mele ka laboratoring ea rona e netefalitsoeng ea ISO 17025:
  • Nale e hlabiloe: Matla a tšepe (ASTM D882), khanyetso ea lik'hemik'hale (ISO 175), Ho hanyetsa UV (ISO 4892-2).
  • Spunlace: Absorbency (AATCC 79), bonolo (KES-F), lint content (ISO 15797).
• Litlhahlobo tsa Mokha oa Boraro: Litlhahlobo tsa selemo le selemo tse entsoeng ke SGS/Intertek li netefatsa ho lateloa ha litifikeiti:
  • ISO 9001: Tsamaiso ea tsamaiso ea boleng.
  • OEKO-TEX® Standard 100 (Sehlopha sa I–II): Tšireletseho ea letlalo.
  • FDA 21 CFR 177.1520: Tšireletseho mabapi le lijo (spunlace).
  • CE EN 13795: Ho latela lisebelisoa tsa bongaka (spunlace).

Re fana ka litlaleho tse felletseng tsa tlhahlobo bakeng sa odara e 'ngoe le e' ngoe - e bohlokoa hore bareki ba B2B ba fihlelle litlhoko tsa taolo (mohlala, FIHLA, US FDA) le litekanyetso tsa boleng ba bareki.

6.3 Tsebo ea ho Itloaetsa bakeng sa Litlhoko tsa B2B

Re utloisisa hore bareki ba B2B ba na le litlhoko tse ikhethang-sehlopha sa rona sa 10 baenjiniere ba masela (ka 8+ lilemo tsa boiphihlelo ba microfiber) e fana ka mokhoa oa ho qetela ho isa qetellong:

• Boikemisetso ba lintho tse bonahalang:
  • Karolelano ea motsoako: Fetola karo-karolelano ea PET/PA6 (60/40 ho 90/10) ho beha matla pele (PET e phahameng) kapa ho monya (PA6 e phahameng).
  • Fiber fineness: 0.1-0.8 dtex (e ntle bakeng sa bonolo, mahoashe bakeng sa ho tšoarella).
  • Mefuta e fapaneng ea eco-friendly: Eketsa 5–10% ea bamboo/cotton microfibers bakeng sa ho tuma ka mokhoa o tsitsitseng.
• Tlhahiso ea Sehlahisoa:
  • Nale e hlabiloe: Boima ba tloaelo (160- 1000gsm), botenya (0.5-2.0 limilimithara), le liphekolo (antibacterial/ UV e hanyetsanang).
  • Spunlace: Bophara ba tloaelo (100- 220 cm), boima (30- lik'hilograma tse 150), le liphekolo (mongobo-wicking/anti-static).
• Packaging Customization:
  • Boholo ba roll: 50-300 m (ho latela litlhoko tsa mohala oa tlhahiso ea bareki).
  • Ho ngola: Li-logos tse ikhethileng, dinomoro tsa sehlopha, le barcode (bakeng sa ho latedisa).
  • Sephutheloana se nyopa: Mekotla e tiisitsoeng ka vacuum e nang le sterilization ea EO (bakeng sa spunlace ea bongaka).

Mehlala e tloahelehileng e fanoa nakong ea matsatsi a 5-7 (spunlace) kapa matsatsi a 7-10 (hlaba nalete)- kapele ho feta bahlodisani (10- matsatsi a 15)- ho potlakisa kemiso ea nako ea ntlafatso ea sehlahisoa sa hau.

6.4 Litheko tsa B2B tsa tlholisano & Melao e Fetohang

E le moetsi ea tobileng (ha ho batho ba mahareng), re fana ka litheko tse tobileng fekthering tse tlase ka 10-20% ho feta lik'hamphani tsa khoebo. Melemo ea bohlokoa ea litheko:

• Litheolelo tsa Molumo:
  • 5% theoha bakeng sa odara ≥50 tons/selemo.
  • 10% theoha bakeng sa odara ≥200 tons/selemo.
  • 15% theoha bakeng sa odara ≥500 lithane / selemo.
• Likonteraka tsa Nako e telele: 12Litheko tse tsitsitseng tsa likhoeli tse 24 (e sireletsa bareki ho tloha ho feto-fetoha ha theko ea PET/PA6- e ka nyolohang ka 15-25% selemo le selemo.).
• Mehlala ea Theko: Mahala 1m × 1m disampole (lintlha tse tloaelehileng); $50- $ 200 bakeng sa mehlala e tloaelehileng (e khutliselitsoe haeba o entse odara ≥5 lithane ka hare 3 likhoeli).

Lipehelo tse feto-fetohang tsa tefo bakeng sa bareki ba B2B:

• Bareki ba bacha: T/T (30% tsoelo-pele, 70% khahlano le kopi ea B/L) kapa L/C ha u bona.
• Bareki ba thehiloeng (1+ selemo): Bula akhaonto (nete 30/60 matsatsi) kapa tefo ea khoeli le khoeli ea polelo (bakeng sa litaelo tse kholo).

6.5 Global B2B Logistics & Tšehetso

Re nolofatsa liketane tsa phepelo ea lefats'e bakeng sa bareki ba B2B ka thepa e sebetsang hantle le tšehetso e arabelang:

• Logistics Partners: Maersk, COSCO (thepa ea leoatleng), DHL, FedEx (thepa ea moea) - isa ho 55+ linaha:
  • Thepa ea leoatle: 20- matsatsi a 35 ho ea ho EU/US; 7- matsatsi a 15 ho ea Asia Boroa-bochabela; 30- matsatsi a 45 ho ea Afrika. FOB Xiamen / Shanghai kapa CIF ho boema-kepe ba hau.
  • Thepa ka sefofane: 3-Matsatsi a 5 bakeng sa litaelo tse potlakileng (mohlala, lihlopha tsa mohlala, khaello ea mohala oa tlhahiso).
• Phetiso ea malibhong: Re lokisa litokomane tsohle tsa kantle ho naha (setlankana sa litefiso, lenane la ho paka, setifikeiti sa tšimoloho, litlaleho tsa setifikeiti, phatlalatso ea meetlo) ho qoba tieho. Bakeng sa bareki ba EU, re fana ka linomoro tsa EORI le IOSS bakeng sa ho latela VAT.
• Ka mor'a-Thekiso Tšehetso:
  • 24/7 Tšebeletso ea bareki ba buang Senyesemane (imeile, mohala, WhatsApp).
  • Ho fetola meqolo e sa sebetseng hantle (e netefalitsoe ke SGS) ka hare 7 matsatsi a ho fumana.
  • Tšehetso ea tekheniki sebakeng sa marang-rang (bakeng sa odara ≥100 tons/selemo): Baenjiniere ba rona ba etela setsi sa hau ho ntlafatsa tšebeliso ea lesela moleng oa hau oa tlhahiso (mohlala, lokisa hlakola litlhophiso tsa mochini o fetolang).

7. Lipale tsa Katleho ea Bareki ba B2B: Kamoo WINIW Non Woven Microfiber Fabric e Fetotseng Khoebo ea Bona

Ka tlase ke mehlala ea 'nete ea lefats'e ea kamoo masela a rona a sa lohiloeng a li-microfiber a rarollotseng liphephetso tsa bareki ba B2B le ho tsamaisa kholo..

Thuto-pale 1: Letšoao la ho Hloekisa Liindasteri la US le Fokotsa Litšenyehelo ka Lesela le Punched Needle

Moreki: Letšoao la ho hloekisa indasteri la US (chelete ea selemo le selemo: $80M) ho rekisa lifeme tsa ho khoahlapisa.
Phephetso: Lisebelisoa tsa bona tsa k'hothone-polyester li ne li nka nako e 100-200 feela ea ho phunya, e hlokang phetoho kgafetsa. Bareki ba ile ba tletleba ka litšenyehelo tse phahameng, mme lets'oao le ne le lahleheloa ke karolo ea 'maraka ho bahlolisani ba nang le lihlahisoa tse tšoarellang.
Tharollo: Nalete ea WINIW's 400gsm e hlabile lesela le sa lohiloeng la microfiber (137cm bophara, 1.2mm botenya, matla a matla ≥250 N/5cm). Ho tšoarella ha lesela le ho hanyetsa lik'hemik'hale (10% li-acids / alkalis) tse tsamaellanang le litlhoko tsa indasteri.
Liphetho:

• Bophelo ba Sehlahisoa: Lipalesa tse ncha li ile tsa fela 500+ lipotoloho (3x e telele ho feta k'hothone-polyester), ho fokotsa litšenyehelo tsa phetiso ea bareki ka 60%.
• Khōlo ea Thekiso: Letšoao le ile la boela la khutla 15% karolo ea mmaraka, le lekeno la selemo le eketsehile ka 20% (ho tloha ho $80M ho isa ho $96M).
• Tlhokomelo ea bareki: Sekhahla sa ho boloka bareki se nyolohile ho tloha 75% ho 90% ka lebaka la maikutlo a matle mabapi le "boleng ba nako e telele" ba "pads".

Qotsa: “Lesela le hlanngoeng la nale la WINIW le ne le fetola papali. Bareki ba rona ha ba sa tlameha ho khutlisa li-pads beke le beke, mme sehlopha sa rona sa barekisi se na le monyetla o hlakileng oa tlholisano. Re ekelitse mohala oa rona oa lihlahisoa ho kenyelletsa 6 mefuta e fapaneng ea "microfiber pad" - kaofela li sebelisa lesela la WINIW. - CEO, Letšoao la ho Hloekisa Liindasteri la US

Thuto-pale 2: Letšoao la Tlhokomelo ea Bana la Europe le Matlafatsa Kabelo ea 'Maraka le Spunlace Wipes

Moreki: Letšoao la Europe la tlhokomelo ea bana (chelete ea selemo le selemo: €50M) ho rekisa dihlako tsa bana.
Phephetso: Litlhapi tsa bona tsa polyester li bakile ho hlohlona ha letlalo 15% ea basebelisi, e lebisang ho phaello e phahameng le maikutlo a fosahetseng. Ba ne ba hloka ultra-soft, mefuta e meng ea hypoallergenic ho boloka bareki le ho holisa karolo ea mmaraka.
Tharollo: WINIW's 50gsm e betla lesela le sa lohiloeng la microfiber (160cm bophara, 0.3mm botenya, Sehlopha sa OEKO-TEX® sa I, ultra-soft Grade 5, phekolo ea antibacterial). Bonolo ba lesela le thepa ea hypoallergenic e ile ea rarolla mathata a ho teneha.
Liphetho:

• Phokotso ea ho halefisa: Litletlebo tsa ho teneha ha letlalo li ile tsa theoha 15% ho 2% ka hare 6 likhoeli tsa ho qala lisebelisoa tse ncha.
• Khōlo ea Kabelo ea 'Maraka: Letšoao le ile la fumana 10% karolo ea 'maraka Europe, ho rekisa bahlolisani ho barekisi ba ka sehloohong (Carrefour, Tesco).
• Litheko tsa Premium: Li-wipe li ne li rekoa 20% e phahameng ho feta mefuta e meng ea polyester-bareki ba ne ba ikemiselitse ho lefa haholoanyane bakeng sa melemo ea "bonolo holim'a letlalo la lesea".. Annual revenue increased by 25% (from €50M to €62.5M).

Qotsa: “WINIW’s spunlace fabric met our strict standards for baby safety and softness. The antibacterial treatment also gave us a unique selling point—parents love that the wipes ‘protect against germs’ while being gentle. We now use WINIW’s fabric for 100% of our baby wipe line.” – Product Director, European Baby Care Brand

Thuto-pale 3: Chinese Automotive Filter Manufacturer Wins Toyota Contract

Moreki: A Chinese automotive filter manufacturer (chelete ea selemo le selemo: ¥200M) supplying air filters to domestic automakers.
Phephetso: They bid on a contract to supply filters to Toyota but needed a fabric that met Toyota’s strict filtration standards (95% efficiency for 5μm particles) and temperature resistance (-40°C ho ea ho +120°C). Their existing polyester fabric failed the tests.
Tharollo: Nalete ea WINIW's 300gsm e hlabile lesela le sa lohiloeng la microfiber (137cm bophara, 1.0mm botenya, porosity 70%, ho kena ha moya 80 L/m²/s). Matla a ho sefa ha lesela le ho hanyetsa mocheso ho feta litlhoko tsa Toyota.
Liphetho:

• Konteraka Win: Moetsi o hapile konteraka ea lilemo tse 3 ea ho fana 500 lithane/selemo sa lifilimi tsa Toyota Corolla—e hlahisang ¥50M ka lekeno la selemo le selemo (25% ea chelete eohle).
• Tlhokomelo ea Boleng: Toyota e rorisitse li-filters ""ts'ebetso e tsitsitseng,” mme moetsi o ile a memeloa ho etsa kopo ea likonteraka tse eketsehileng (Camry, RAV4).
• Katoloso ea Lefatše: Setifikeiti sa Toyota se thusitse moetsi ho kena mebarakeng ea kantle ho naha (Asia Boroa-bochabela, amerika boroa)- e eketsa ¥30M ka chelete ea selemo.

Qotsa: “Lesela le hlanngoeng la nale ea WINIW e bile senotlolo sa ho hapa tšepo ea Toyota. Sehlopha sa bona sa tekheniki se sebelitse le rona ho leka lintlha tse fapaneng ho fihlela re fihlela litekanyetso tse nepahetseng tsa Toyota. Konteraka ena e fetotse khoebo ea rona ho tloha ho mofani oa thepa ea lapeng ho ba sebapali sa lefats'e. ” – Motsamaisi oa Thepa, Moetsi oa Sesefo sa Likoloi tsa China

8. Lipotso Tse Botsoang Hangata (LBH) bakeng sa Bareki ba B2B

Ka tlase ke likarabo tsa lipotso tse tloaelehileng tse tsoang ho bareki ba B2B ba nahanang ka lesela la rona le sa lohiloeng la microfiber.

Q1: Nka khetha joang pakeng tsa nale e phunyeletsoeng le lesela la microfiber le sa lohiloeng?

A1: Khetha ho latela litlhoko tsa mantlha tsa kopo ea hau:

• Nale E hlabiloe: E loketse haeba o hloka durability, bongata, kapa matla a phahameng (mohlala, lisebelisoa tsa ho hloekisa indasteri, lifela, ho koala molumo). Molemo ka ho fetisisa bakeng sa mosebetsi o boima, tshebediso ya kgafetsa.
• Spunlace: E loketse haeba o hloka bonolo, ho monya haholo, kapa ts'ebetso e se nang lint (mohlala, lihlako tsa bana, liaparo tsa bongaka, masela a lapeng). Molemo ka ho fetisisa bakeng sa ho ikopanya le letlalo, nepahalo, kapa lisebelisoa tse bonolo tse sebelisoang hang-hang.

Sehlopha sa rona sa tekheniki se ka sekaseka sehlahisoa sa hau sa ho qetela, mohala oa tlhahiso, le 'maraka o reretsoeng ho khothaletsa mofuta o nepahetseng - mahala bakeng sa lipotso tsa B2B.

Q2: Ke palo e fokolang ea taelo e kae (MOQ) bakeng sa mofuta o mong le o mong?

A2: Li-MOQ li fapana ka ho fapana le ho itlhophisa:

• Nale E hlabiloe: Lintlha tse tloaelehileng (160- 1000gsm, 137cm bophara): MOQ= 5 lithane. Liphekolo tse tloaelehileng (antibacterial/UV): MOQ= 10 lithane.
• Spunlace: Lintlha tse tloaelehileng (30- lik'hilograma tse 150, 160/200cm bophara): MOQ= 3 lithane. Bophara ba tloaelo (100- 220 cm) kapa liphekolo: MOQ= 5 lithane.

Bakeng sa tlhahlobo ea batch e nyane (ntshetsopele ya lihlahisoa), re fana ka lithane tse 1–2 tsa "sample orders" ho a 10% tefiso (e khutliselitsoe haeba o etsa odara e felletseng ≥5 lithane ka hare 3 likhoeli).

Q3: Na bophara ba lesela le phunyeletsoeng la nale bo ka etsoa ka mokhoa o ikhethileng (bolelele ba 137 cm)?

A3: Che - mofuta o hlabollotsoeng oa nale o hlahisoa ka bophara bo tsitsitseng ba 137cm, ha mela ea rona ea ho phunya linale e lekantsoe bakeng sa tekanyo ena ho netefatsa matla a tsitsitseng le botenya. Bophara bona boa lekana 90% ea likhoele tsa ho sebetsa liindasteri (mohlala, tlhahiso ea sefe, ho hloekisa phetolo). Haeba o hloka bophara bo fapaneng bakeng sa lesela le phunyeletsoeng ka nale, re ka arola moqolo oa 137cm ka bophara bo fokolang (mohlala, 68.5cm) ntle le litšenyehelo tse ling.

Q4: Na lesela la hau la spunlace le loketse lisebelisoa tsa ho kopana le lijo (mohlala, kichine e hlakola)?

A4: E, lesela la rona la spunlace le sa lohiloeng la microfiber lea kopana FDA 21 CFR 177.1520 (tšireletseho ea ho kopana le lijo) ha e hlahisoa ka lisebelisoa tse tala tsa boemo ba lijo 'me ho se na lisebelisoa tse kotsi. E loketse bakeng sa ho hlakola kichineng, ho hloekisa setsi sa ho lokisa lijo, le lilakana tsa ho paka lijo. Re fana ka setifikeiti sa FDA bakeng sa sehlopha se seng le se seng ho netefatsa ho latela melao ea polokeho ea lijo ea US le EU.

Q5: Ho nka nako e kae ho tlisa odara e ikhethileng (mohlala, 'mala o tloaelehileng bakeng sa lesela la spunlace)?

A5: Linako tsa ho etella pele bakeng sa litaelo tsa tloaelo:

• Mobala o Tloaelehileng oa Spunlace: 10- matsatsi a 15 (5 matsatsi a ho nyalanya mebala + 10 matsatsi a tlhahiso).
• Spunlace Custom Width: 7- matsatsi a 10 (tlhahiso e tloaelehileng + 2 matsatsi a ho senya).
• Nale Punched Custom Treatment: 15- matsatsi a 20 (10 matsatsi a ho etsoa kalafo + 10 matsatsi a tlhahiso).

Litaelo tsa tloaelo tse potlakileng (mohlala, khaello ea mohala oa tlhahiso) e ka potlakisoa ho matsatsi a 5-10 ka 15% tefiso.

Q6: Bophelo ba shelofo ea lesela la hau le sa lohiloeng la microfiber ke bofe? E lokela ho bolokoa joang?

A6: Shelf bophelo ke 2 lilemo bakeng sa mefuta e 'meli ha e bolokiloe hantle:

• Mocheso: 15-30°C (qoba mocheso o feteletseng >40°C, e nyenyefatsang likhoele; kapa serame <0°C, e etsang hore lesela le benyehe).
• Mongobo: 40-60% (mongobo o phahameng o bakang hlobo hodima sephuthelo; mongobo o tlase ha o na tšusumetso ho PET/PA6).
• Sephutheloana: Boloka filimi ea pele ea PE le mokotla o lohiloeng o tiisitsoe ho fihlela o sebelisoa. Hang ha e butsoe, sebelisa moqolo ka hare 1 khoeli (ho thibela tshilafatso ya lerole le ho monya mongobo).
• Polokelo: Li-roll tsa stack ha li na ho feta 10 e phahameng ho thibela ho pshatla; boloka hole le kganya ya letsatsi (UV e fifatsa mebala le ho fokolisa likhoele) le lik'hemik'hale (mohlala, solvents, tse senyang PET/PA6).

9. Ikopanye le WINW: Morekisi oa Hao ea Tšepahalang ea Non Non Woven Fabric Supplier

Hore na o hloka lesela le tšoarellang la nale bakeng sa tšebeliso ea indasteri kapa lesela la spunlace le bonolo haholo bakeng sa lisebelisoa tsa letlalo, Lesela la WINIW's Non Woven Microfiber le fana ka boleng, tlhophiso, le ho ananela litlhoko tsa hau tsa khoebo ea B2B. Ikopanye le rona kajeno ho kopa quote, mohlala, kapa therisano ya tekheniki.

Mokhoa oa puisano

• Lebitso la K'hamphani: WINIW Nonwoven Materials Co.Ltd.
• Email: [email protected]
• Mohala: 0086-189-6568-7670
• Webosaete: www.panonwoven.com
• Aterese: 1-1-417 Xinjinghuating Luocheng Toropo ea Huian County ea Quanzhou Motse oa Profinse ea Fujian Chaena

Mokhoa oa ho Qala Tšebelisano ea Hao ea B2B

1. Kenya patlisiso ea B2B: Re bolelle mofuta oo u o batlang (hlaba nalete), litlhaloso (boima, botenya, bophara), ho qetela kopo, bongata, le marakeng shebiloeng ka fono, imeile, kapa foromo ea sebaka sa rona sa marang-rang.
2. Fumana Qotsulo e Tloaelehileng & Keletso: Sehlopha sa rona sa thekiso se fana ka quote e qaqileng (theko, litheolelo, lead time) le khothaletso ea tekheniki ka hare 24 lihora.
3. Mehlala ea Teko: Odara disampole tse tlwaelehileng tsa mahala kapa disampole tse lefellwang tse tlwaelehileng ho lekola tshebetso moleng wa tlhahiso ya hao.
4. Netefatsa Taelo & Saena Konteraka: Qetella litlhaloso, dipehelo tsa phano, le tefo; saena konteraka ea B2B (e kenyelletsa litiisetso tsa boleng, boitlamo ba setifikeiti, le lipehelo tsa lekunutu).
5. Tlhahiso & Tlhahlobo ea Boleng: Re hlahisa lesela la hau, etsa tlhahlobo ea batch, le ho o romella tlaleho ea teko bakeng sa tumello.
6. Ho tsamaisa ka sekepe & Kamora-Thekiso: Re romella odara ka thepa eo u e ratang; sehlopha sa rona se latela ho netefatsa khotsofalo le ho fana ka tšehetso e tsoelang pele ea tekheniki.

WINIW Nonwoven Materials Co., Ltd. - Mofani ea ka Sehloohong oa Chaena oa B2B oa Lesela le sa Lohoeng la Microfiber. Ho tšoarella, Bonolo, Boleng - E Hahiloe Bakeng sa Katleho ea Khoebo ea Hau.